EcuTek is proud to announce the release of ProECU Tuning Tools for the Nissan 370Z

Z370Z011 · 05-05-2013, 01:52 AM

Quote:

Originally Posted by visconti

It's called the cruise control button

i have a question now that you've mentioned this.
would cruise control be completely lost? or would i still be able to use my cruise control?

shivers · 05-05-2013, 10:11 AM

Quote:

Originally Posted by visconti

We can support any Ecu just need a rom dump !

Thanks for the info. Wish I could help with a ROM dump, but there's no EcuTek facilities in Tennessee. Closest is Forged Performance in Atlanta. Very interested to see how all of this shakes out.

Mr.Squeeze · 05-05-2013, 10:42 AM

Quote:

Originally Posted by ENT-Z

I don't see how you would be able to change slip control settings on the fly like you can with the racelogic control knob, so I'm not sure it's an equal comparison. Am I missing something?

I am not sure witch is the reason Racelogic unit isn't going anywhere tell I can compare both. Jon just posted cruise control button can be used we shall see how it works.

visconti · 05-05-2013, 07:17 PM

Quote:

Originally Posted by shivers

Thanks for the info. Wish I could help with a ROM dump, but there's no EcuTek facilities in Tennessee. Closest is Forged Performance in Atlanta. Very interested to see how all of this shakes out.

Sure you can help

I can mail you a cable

Quote:

Originally Posted by Z370Z011

i have a question now that you've mentioned this.
would cruise control be completely lost? or would i still be able to use my cruise control?

No it'll still work

Dynotronics1 · 05-06-2013, 11:55 AM

Quote:

Originally Posted by shivers

Thanks for the info. Wish I could help with a ROM dump, but there's no EcuTek facilities in Tennessee. Closest is Forged Performance in Atlanta. Very interested to see how all of this shakes out.

we can also send you one of our loaner cables if your interested in getting your cars ROM read to include in the database. We have afleet of 50 loaner cables, so our customers don't have to wait to get calibrations.

We are also all over the country each month, and can gladly stop by a local club meeting, dyno day, or shop to read a car, set you up with a calibration, or just BS about what this cool new SW brings to the table!

Let me know......

JC671 · 05-06-2013, 06:35 PM

Quote:

Originally Posted by JC671

Visconti, your original post on the first page is outdated with the various questions people have that you had answered. It makes it hard for someone trying to follow this thread have to read through all the post just to find out the extra features or added things that this software can do.

Can you please update the original post with all the added features discussed throughout the thread, along with pricing, listing of authorized tuners throughout the world who support/tune with this software. Basically everything that has been covered so far that is not covered in the first post.

I'm sure it will help a lot of folks who haven't chimed in but are trying to follow the thread.

?

tiger123 · 05-06-2013, 06:45 PM

[QUOTE=visconti;2271071]This software will not be the cheapest option on the market but will offer more support and a lot more advanced features in the months to come.

EcuTek's ProECU Programming Kit w/ License is $600.

The kit contains a USB OBD2 Cable, EcuTek software that has advanced diagnostic features and Nissan Tools.

I'll be offering ETunes for non-forced induction cars for $350

John,

I am interested in ETune. I have a Non FI car. Let me know how/where I can get this.

All the best to you.

visconti · 05-08-2013, 08:27 AM

[QUOTE=tiger123;2303117]

Quote:

Originally Posted by visconti

This software will not be the cheapest option on the market but will offer more support and a lot more advanced features in the months to come.

EcuTek's ProECU Programming Kit w/ License is $600.

The kit contains a USB OBD2 Cable, EcuTek software that has advanced diagnostic features and Nissan Tools.

I'll be offering ETunes for non-forced induction cars for $350

John,

I am interested in ETune. I have a Non FI car. Let me know how/where I can get this.

All the best to you.

I sent you a PM

V8Killer · 05-08-2013, 09:22 AM

I currently had UpRev software on my car for my na tune and nitrous tune. Would that be something that will be available in the future?
Products and Services
Currently this is the shop that is the closest to me since I am in NC. I just don't know how I feel about only having one map. Has anyone used this software yet with nitrous?

visconti · 05-08-2013, 09:52 AM

Quote:

Originally Posted by V8Killer

I currently had UpRev software on my car for my na tune and nitrous tune. Would that be something that will be available in the future?
Products and Services
Currently this is the shop that is the closest to me since I am in NC. I just don't know how I feel about only having one map. Has anyone used this software yet with nitrous?

Not on the 370Z platform, but with the GTRs

It might be best that you wait until we have map switching and a few other things

-John

ANMVQ · 05-08-2013, 04:21 PM

How would the E tune work. Just for my case getting 4-6 hours away from home is hard. I would be open to this? $350 is not bad at all. Would we get a OTS tune and make some runs and send the data back to fine tuned?

Thanx John

visconti · 05-10-2013, 10:00 PM

Quote:

Originally Posted by ANMVQ

How would the E tune work. Just for my case getting 4-6 hours away from home is hard. I would be open to this? $350 is not bad at all. Would we get a OTS tune and make some runs and send the data back to fine tuned?

Thanx John

The tune itself is $350 , you'll need a EcuTek cable and license which is $600.

I've said this before - not the cheapest option - but powerful option

-John

gomer_110 · 05-10-2013, 10:07 PM

John, any idea when the VVEL part of the software will be tested and ready for all of us?

roplusbee · 05-10-2013, 10:44 PM

Quote:

Originally Posted by gomer_110

John, any idea when the VVEL part of the software will be tested and ready for all of us?

This is the question of the day!

visconti · 05-11-2013, 03:04 PM

It is part of the software, haven't spent much time playing with it

05-06-2013, 06:45 PM	#217 (permalink)
tiger123 Enthusiast Member Join Date: Jan 2013 Location: Chicago Posts: 367 Drives: 09 AT Tour/Sport/Nav Rep Power: 13	[QUOTE=visconti;2271071]This software will not be the cheapest option on the market but will offer more support and a lot more advanced features in the months to come. EcuTek's ProECU Programming Kit w/ License is $600. The kit contains a USB OBD2 Cable, EcuTek software that has advanced diagnostic features and Nissan Tools. I'll be offering ETunes for non-forced induction cars for $350 John, I am interested in ETune. I have a Non FI car. Let me know how/where I can get this. All the best to you. __________________ G2\|\|Berk CBE/HFC\|\|LED In-Out\|\|35% Tint\|\|V1\|\|GT-R Dome Lights\|\|JDM Rear Fog Light\|\|Z Speed Undershroud (SS)\|\|Red GT-R Start Button\|\|StopTech Rotors\|\|Project MU\|\|Z1 Oil Cooler\|\|EcuTek\|\|

05-08-2013, 09:22 AM	#219 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	I currently had UpRev software on my car for my na tune and nitrous tune. Would that be something that will be available in the future? Products and Services Currently this is the shop that is the closest to me since I am in NC. I just don't know how I feel about only having one map. Has anyone used this software yet with nitrous? __________________ "Punch" Too much to list and a baby shot of nitrous....

05-08-2013, 04:21 PM	#221 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	How would the E tune work. Just for my case getting 4-6 hours away from home is hard. I would be open to this? $350 is not bad at all. Would we get a OTS tune and make some runs and send the data back to fine tuned? Thanx John __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

05-10-2013, 10:07 PM	#223 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	John, any idea when the VVEL part of the software will be tested and ready for all of us? arnoldas likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

05-11-2013, 03:04 PM	#225 (permalink)
visconti Enthusiast Member Join Date: Jul 2012 Location: Norwalk, CT Posts: 455 Drives: Sub WRX STi Rep Power: 13	It is part of the software, haven't spent much time playing with it __________________ John@vTune.us EcuTek Master Pro Tuner Visconti Tuning Webstore \| Support Documents & Downloads

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan corp. news release about 370Z	admin	Nissan 370Z General Discussions	17	07-06-2011 06:17 AM
Press Release: Flex Tools now has a 4 3/8 backing plate for the Flex XC 3401	DetailersDomain	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	3	02-21-2011 08:38 AM
Official Release of Nissan 370Z @ NissanUSA.com	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	6	11-19-2008 09:32 PM