Problem with Uprev
 

Anybody having any problems after updating the program stuff like going into limp mode right after reflash then reflash again and it is fixed.
Also weird error messages stuff like that.

And yes I called them and emailed Hans but as usual no return call or email:shakes head:

They never return phone calls period:shakes head:

Every now and then Randy will return an email but thats like after a week or two after its sent.

I had problems with errors during updates and car sputtering after reflash... You just gotta reflash it again.

I know but but there has to be something wrong with the update b/c I reflash and it goes away and sometimes comes back,all of this started after I did the updater program so I know it's on there end.

I was just told today Uprev put out a new version and it has some issues still.

Sent from my Supercharged GS3 via Tapatalk 2

Where did you here this?

Really? Please do explain and keep us posted. I have not updated nor reflashed the car since my last tune.

x2

Detect Flash Error
 

I'm just trying to load a tune from GTM - Osiris can connect to the ECU - it loads the tune file and then when it should start the flash process - it returns the error "Detect Flash Error" and then goes to "Searching for ECU...", and then just stays that way (I've waited up to 10 minutes).


No idea what to try next.

Update: 06.14.13

I had tried all the stuff below - and, I tried disabling the IOS (as per Omar at UpRev) - nothing worked and then UpRev asked me to send them the cable for testing - it was defective - they're sending me a replacement (Thank You UpRev!) - I guess defects in these cables are very rare (which is a good thing except in the case of my experience).


Stuff I had tried to get the flash to work:

1. I've tried using another computer
2. I've charged the battery - voltage is about 14
3. I've tried it while having the battery charger hooked up
4. I've tried it with the headlamp fuse removed incase the voltage drop was having an effect - I have a US car, but had daytime running lights setup at a dealership - DTRL are required by law in Canada - not sure how the dealership set up the DTRL - there is no DTRL solenoid in the box where you would normally see it
5. I've tried it with the rad fan fuse removed incase the voltage drop was having an effect
6. I've tried it after running the car for a while
7. Sometimes Cipher finds a code: P0603 Internal Control Module Keep Alive Memory (KAM) Error which I can clear (screenshot attached) - sometimes Cipher does not return any codes.
8. I've attached a screenshot off Osiris right before I click Flash ECU
9. When I click Flash ECU - it loads the tune file and then when it should start the flash process, it returns "Detect Flash Error!" for about 2 seconds, and then changes to "Searching for ECU..." and then just stays that way (I've waited up to 10 minutes to see if it would change / do anything else)
10. Every time it fails - I disconnect / reconnect the battery to reset the ECU
11. After disconnecting / reconnecting the battery, the car starts and runs fine

If you are the only one experiencing this problem, then I would suspect a wiring problem. Check the connectors between the OBD port and your computer, inclusive. You may have damaged a pin or socket.

A friend who's car was at CIN Motorsports told me this: Yup off the dyno I got 292 whp and 256 lbs torque and then when we were taking it on the road to do the live tuner it wasn't working because uprev did a update yesterday that ****** up the program and it was saying unable to change anything so in have to go back to he can do the fine tuning with the live tuner on the road to get my fuel economy better

Sent from my Supercharged GS3 via Tapatalk 2

That's the same thing that happened to me I did a reflash and went to go check it with live tuning and it won't work..

My real tuning also will not work after i installed the last few updates from uprev.
I have the programs on 2 different lab tops and it does the same on both. I even took my desk top out to the car the same thing happened with it ( it tell me that the programs need to be updated). I have updated it daily and not sure what to do.
Any body else have these problems

Hope someone from Uprev chimes in soon.

I'm not gonna do the update until I hear a resolve or new patch is out.

I'm sitting on the dyno right now and my tuner said the live isn't working either.....he says the ecu is having issues holding value for the afrs also. One run it runs rich. he readjusts it, then does a pull and it runs even richer. then he does another pull and its running lean. he's lost right now and my car is now doing 16whp less then when it came in.....


PLEASE HELP US UPREV!

I went thru this b/s with Uprev before, they had a bug in one of there updates and Hans found it in a week.:shakes head:

Maybe this is why I have a high idle issue lol

Sent from my Supercharged GS3 via Tapatalk 2

not what I wanted to hear......:ughdance: basically 2 hours of tuning with massively negative results.... I'm back to where I was pre-tune.

Sorry dude

In a way it is nice to see some other people having problems like mine,which means I know it is not my car.:ugh2:

Damn I'm sorry to hear man... Best to call them directly...I would not do any tuning until this is fixed. I'd run the last tune till then. Safest way period.

Last time this happen I had to hound them to look at it:icon14:

Bugs creep into software. Happens to the best of companies.

Failure to communicate critical problems to your customers is not acceptable. Failure to acknowledge contacts from customers with bug problems is unforgivable. Is it that difficult to reply with a "Yeah. We're working on it. Don't use the software until we release the fix."? I'll be looking elsewhere when shopping for tuning software.

wow thats shitty.. have any of you tried uninstalling and re-installing an older version of the software? or is the problem in their tune and not the actual software?

Damn well keep us updated. I planned on getting a tune next Sat.

Tuner and car is not that problem. I sat with him the whole time and watched. He tuned my car originally and picked up 17whp ans 22lbs of torque. Don't think a retune would be the hard part for him. He sent an email to UpRev and will be calling them Monday also. He didn't even charge me for 3 hours of his time today as he could not figure out what was going on.

I've been tuning with Uprev for 2 years and have done everything including uninstalling and re-installing none of this works it is definitely on their end.

Hans emailed me and said he found the cause of it and has fixed it just run updater program and use the software as normal.:tup:

Awesome! I'll text my tuner and let him know. hopefully he can squeeze me back in later this week!

Thanks for updating the community :tup:

+Rep

just put the updates in

x2

Thanks for the help too Steve... Appreciate it alot.:tup:

Yup my tuner tuned a 350 tonight and said all worked great. Ill be going back in on Saturday night to have mine retuned.

Yeah it's all good now:tup:

It sounds like everything is fixed now. I haven't been able to get up rev yet but plan on getting it soon. I will say this though. With the minor mods I have done without a tune there are days when I get idle issues and such, running lean or whatever. Never really had any bogging or stalling but def lean/rich issues. I think the Ecu itself is constantly remapping and adjusting for diff variables and sometimes overcompensates due to temp or whatnot. Hopefully they can work out the bugs BEFORE they publish the next update.

seem like you came back on this forum to bitch on uprev but it seem your mentioned in 2013 about your Pingning issues with the stock ecu according to your post.. now with Uprev. you used an e-tune which isnt very great and a dyno tune was recommended to you in a previous post but you still went for an e-tune. you might need a couple more to dial in a better tune.. this is why Uprev used to give 3-etune with a purchase of their liscense. (no for the Tuner version)

so I would probably look at something else if I was you....



way to go to bring old post from 2013...! hehe
the previous post you brought up was from 2010....

it seem like you are a new ecutek lover without mentioning it..... trying to bash on Uprev lol