Technosquare tune

Junior370z · 06-17-2009, 11:18 PM

I just had my ECU tuned by Technosquare today and according to my butt dyno, there is a difference lol! The car feels more responsive and more torque on the low end side. Before the tune the Z felt a little sluggish in the low end due to HFC. Now after the tune she feels more "alive" if you know what I mean?!

Also before the tune at WOT 2nd to 3rd, the Z would just squat. Now 2nd to 3rd breaks the tires free. I think this is due to my rev limit changed from 7500 to 8000. Now that I can rev the motor higher, when I shift to the next gear my rpms stay up around 5000. The higher the rpm, the more power. To an extent of course. I definately feel a difference!

I'm glad I had it done. Of course once I get the Stillen S/C for the Z it would have to be retuned again, but who cares!!!

CrownR426 · 06-17-2009, 11:21 PM

How much was the ecu chip?

KillerBee370 · 06-17-2009, 11:29 PM

Glad you like it! It was nice meeting you today...

Let's see the pic of the twins!

Junior370z · 06-17-2009, 11:35 PM

Quote:

Originally Posted by KillerBee370

Glad you like it! It was nice meeting you today...

Let's see the pic of the twins!

I posted it in the "General Discussion" and also in my album!

initialgemini · 06-17-2009, 11:48 PM

nice! I'd like to see how the tune tweaked with the power curve. Do you feel that the car hits peak power at a lower RPM with the tune?

Junior370z · 06-18-2009, 12:17 AM

Quote:

Originally Posted by initialgemini

nice! I'd like to see how the tune tweaked with the power curve. Do you feel that the car hits peak power at a lower RPM with the tune?

Peak power is toward the high rpm range. Between 7000-8000. The car just pulls all through the rpm range if that's what you mean. Also it feels smoother all the way to 8000 rpm!

Phimosis · 06-18-2009, 12:29 AM

Quote:

Originally Posted by initialgemini

nice! I'd like to see how the tune tweaked with the power curve. Do you feel that the car hits peak power at a lower RPM with the tune?

The graph of the power curve you seek is here: Technosquare ECU remap

initialgemini · 06-18-2009, 12:45 AM

Quote:

Originally Posted by Phimosis

The graph of the power curve you seek is here: Technosquare ECU remap

Thanks

How aggressive is the tune? I skimmed over the thread and couldn't really find a clear answer. Any graph with the A/F ratio along side?

Junior370z · 06-18-2009, 01:03 AM

Quote:

Originally Posted by Phimosis

The graph of the power curve you seek is here: Technosquare ECU remap

LOL that's where I saw the dyno results LOL! Thanks Phimosis! I didn't do the dyno because I have pretty much the same performance mods as killerbee370's and he dyno'd his.

Phimosis · 06-18-2009, 01:19 AM

Quote:

Originally Posted by initialgemini

Thanks

How aggressive is the tune? I skimmed over the thread and couldn't really find a clear answer. Any graph with the A/F ratio along side?

I have a graph of a single run after remap with A/F ratio. didn't scan it. It's not agressive (lean). The agressiveness is in the ignition advance. I think that info is proprietary. (from memory) The a/f runs similar to stock up to around 6,000 rpm. The re-map is around 12.5:1 at 3k rpm and 12.0 at 6k, then dips to around 11.8 at redline vs. the stock tune trending up to a little over 12.0 at redline. So it is rich to keep temperatures down and power increases coming from timing advance.

Modshack · 06-18-2009, 11:17 AM

Quote:

Originally Posted by Phimosis

. The re-map is around 12.5:1 at 3k rpm and 12.0 at 6k, then dips to around 11.8 at redline vs. the stock tune trending up to a little over 12.0 at redline. So it is rich to keep temperatures down and power increases coming from timing advance.

Nice job on the re-map. Looks like they got the A/F's right where you need them for best power...

Great article on A/F's here: Autospeed article

Savage08 · 06-18-2009, 11:55 PM

Just wondering if doing this tune would void my warranty? I'm assuming so.. but hoping not.

KillerBee370 · 06-19-2009, 01:11 AM

Quote:

Originally Posted by Savage08

Just wondering if doing this tune would void my warranty? I'm assuming so.. but hoping not.

Anything you do to a car carries the possiblity and all likelyhood of voiding a warranty. The beauty of a reflashed ECU is that it's just that... a reflash that can be flashed back to stock at any time to retain that clever little thing Nissan calls a warranty!

Phimosis · 06-19-2009, 11:44 AM

I didn't want to put it in writing, but let's just say that if I have significant mechanical problems in the future that it may take a few days for my car to make it back to the dealer for repairs....

DIGItonium · 06-19-2009, 01:21 PM

How's the throttle response below 3k rpm? I wonder if you can get more grunt on the low end. I'll have my exhaust and HFC, but I may keep the stock air boxes. Then anything else to lighten the load for more response like flywheel/clutch and pulley wouldn't have anything to do with ECU tune anyhow.

06-17-2009, 11:18 PM	#1 (permalink)
Junior370z A True Z Fanatic Join Date: Apr 2009 Location: Las Vegas Age: 49 Posts: 1,024 Drives: over the speed limit Rep Power: 293	Technosquare tune I just had my ECU tuned by Technosquare today and according to my butt dyno, there is a difference lol! The car feels more responsive and more torque on the low end side. Before the tune the Z felt a little sluggish in the low end due to HFC. Now after the tune she feels more "alive" if you know what I mean?! Also before the tune at WOT 2nd to 3rd, the Z would just squat. Now 2nd to 3rd breaks the tires free. I think this is due to my rev limit changed from 7500 to 8000. Now that I can rev the motor higher, when I shift to the next gear my rpms stay up around 5000. The higher the rpm, the more power. To an extent of course. I definately feel a difference! I'm glad I had it done. Of course once I get the Stillen S/C for the Z it would have to be retuned again, but who cares!!! __________________ DON'T DO IT! ( Click to show/hide ) Stillen CBECAI-U/D PulleyGround KitSwaysSetrab Oil CoolerIchiba Rear Camber KitAgility CoiloverBerk HFCTechnosquare TuneGT-R ButtonVenaci MeshSP Performance Cross Drilled/Slotted RotorsSPC Toe BoltsBomex LipMud flapsAero Jacket Type III WingSold

06-17-2009, 11:21 PM	#2 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 847	How much was the ecu chip? __________________ Love + Hardwork + Passion RIP SVTRacer

06-19-2009, 01:21 PM	#15 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	How's the throttle response below 3k rpm? I wonder if you can get more grunt on the low end. I'll have my exhaust and HFC, but I may keep the stock air boxes. Then anything else to lighten the load for more response like flywheel/clutch and pulley wouldn't have anything to do with ECU tune anyhow. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
COBB AP Tune for the G37	kdo2milger	Tuning	3	09-18-2010 05:47 AM
How do you tune a Z-car?	LiquidZ	Tuning	27	09-24-2009 05:43 PM
Technosquare Oil Cooler Pricing / Availability	SoCal 370Z	Engine & Drivetrain	1	08-19-2009 12:50 PM
Technosquare Inc is looking for ECU BETA testers...	Chebosto	Tuning	16	06-07-2009 12:57 AM

06-17-2009, 11:29 PM	#3 (permalink)
KillerBee370 A True Z Fanatic Join Date: Mar 2009 Location: So Cal baby! Age: 51 Posts: 5,964 Drives: with passion Rep Power: 321	Glad you like it! It was nice meeting you today... Let's see the pic of the twins!

06-17-2009, 11:48 PM	#5 (permalink)
initialgemini Enthusiast Member Join Date: Mar 2009 Location: Irvine, CA Posts: 340 Drives: 2011 FX 35 Rep Power: 250	nice! I'd like to see how the tune tweaked with the power curve. Do you feel that the car hits peak power at a lower RPM with the tune?

06-18-2009, 11:55 PM	#12 (permalink)
Savage08 Base Member Join Date: Mar 2009 Location: Ca Posts: 37 Drives: 370z 6mt tour/sp Rep Power: 16	Just wondering if doing this tune would void my warranty? I'm assuming so.. but hoping not.

06-19-2009, 11:44 AM	#14 (permalink)
Phimosis Enthusiast Member Join Date: May 2009 Location: Oildale, CA Posts: 412 Drives: 2013 911 4S Rep Power: 416	I didn't want to put it in writing, but let's just say that if I have significant mechanical problems in the future that it may take a few days for my car to make it back to the dealer for repairs....