Just had it done today and I thought I would share the graphs etc. Took a little under 2 hours. Pulls way harder between 2-3k rpm where those dead spots
|
|
LinkBack | Thread Tools | Display Modes |
04-21-2012, 04:22 PM | #1 (permalink) |
Base Member
Join Date: Jan 2012
Location: Arizona
Posts: 155
Drives: 2010 MT 370z
Rep Power: 13 |
UpRev tuned!
Just had it done today and I thought I would share the graphs etc. Took a little under 2 hours. Pulls way harder between 2-3k rpm where those dead spots were.
Mods: F.I. CBE + HFC Stillen G3 Intakes Gains were 22.9hp/18.8tq on this dyno. It's a hydraulic dyno and i'm not too sure how much that changes the numbers compared to a roller dyno. Red is baseline. Torque/HP AFR
__________________
309WHP/255TQ ~ UpRev ~ F.I. CBE/12" Res + HFC ~ Stillen G3 ~ CZP ~ Eibach Sways ~ SPL ~ Project Mu
|
04-21-2012, 07:12 PM | #5 (permalink) |
A True Z Fanatic
Join Date: Jan 2012
Location: Cocoa, Florida
Age: 41
Posts: 5,075
Drives: Pantydropper machine
Rep Power: 33 |
Forgive my noobyness, but isn't your far supposed to be around 12.5ish average?
Sent from my iPizzle using magic and new fangled science stuff
__________________
VLEDS | Evo-R | Moddiction | CF Hood Struts | F.I. CF CBE & LTH | Stillen CAI | NST Pulleys | UpRev | Z1 | M7 | Status | Forgestar | PSS | Whiteline | SPL | SPC | Kenwood | Zenclosure | Kicker | Alpine Type R
|
04-21-2012, 07:31 PM | #6 (permalink) | |
A True Z Fanatic
Join Date: Dec 2011
Location: Maryland
Posts: 1,112
Drives: 2010 370Z NAG 7AT
Rep Power: 15 |
...not bad. Congrats !
__________________
|| Build Journal || Follow Us: Web Site || Facebook || Quote:
|
|
04-21-2012, 08:09 PM | #7 (permalink) |
Base Member
Join Date: Jan 2012
Location: Arizona
Posts: 155
Drives: 2010 MT 370z
Rep Power: 13 |
I'm just as big a noob as you and i'm wondering the same thing Can anyone chime in?
__________________
309WHP/255TQ ~ UpRev ~ F.I. CBE/12" Res + HFC ~ Stillen G3 ~ CZP ~ Eibach Sways ~ SPL ~ Project Mu
|
04-21-2012, 08:24 PM | #8 (permalink) |
A True Z Fanatic
Join Date: Jan 2012
Location: Mililani, HI
Posts: 1,566
Drives: 2014 Juke Nismo RS
Rep Power: 16 |
12.5 is a moderate tune for NA. 13+ and youre getting into very lean numbers but more power. He does have more of a chance for detonation but if hes got 93 octane he should be fine. I can't wait to get mine tuned.....Im runnin so pig rich right now its just rediculous!
|
04-21-2012, 09:00 PM | #9 (permalink) | |
Base Member
Join Date: Jan 2012
Location: Arizona
Posts: 155
Drives: 2010 MT 370z
Rep Power: 13 |
Quote:
Should I check it out with the tuner or just leave it?
__________________
309WHP/255TQ ~ UpRev ~ F.I. CBE/12" Res + HFC ~ Stillen G3 ~ CZP ~ Eibach Sways ~ SPL ~ Project Mu
|
|
04-21-2012, 09:07 PM | #10 (permalink) |
Base Member
Join Date: Jan 2012
Location: Arizona
Posts: 155
Drives: 2010 MT 370z
Rep Power: 13 |
Tim, from Xact Dyno!
According to UpRevs website hes the only certified tuner in Arizona. Which is why I ended up going to him.
__________________
309WHP/255TQ ~ UpRev ~ F.I. CBE/12" Res + HFC ~ Stillen G3 ~ CZP ~ Eibach Sways ~ SPL ~ Project Mu
|
04-21-2012, 10:32 PM | #13 (permalink) |
A True Z Fanatic
Join Date: Jan 2012
Location: Mililani, HI
Posts: 1,566
Drives: 2014 Juke Nismo RS
Rep Power: 16 |
conservative? What do you consider yours then at 12.5? The higher the number, the leaner it is. the leaner it is, the more agressive it is. I'll probably aim for low 13's for my tune. 14.6 is stoic which is a perfect air:fuel ratio but very dangerous on detonation. low 13's is mildly agressive. I would consider mid 13's fairly agressive.
|
04-22-2012, 01:47 AM | #14 (permalink) |
Premium Member
Join Date: Oct 2011
Location: Tampa
Posts: 4,142
Drives: 13' Magma Red Nismo
Rep Power: 7335 |
Well this definitely explains why my car runs so much better with 93 as opposed to 91 with it still being untuned. So 13 is considered okay running 93? I always see people shooting for 12.6-12.8. I'm running 13.5-13.8 untuned right now, and it's running better than I thought, but still not as good as it could be.
__________________
Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI
New Car: Under Construction |
04-22-2012, 02:01 AM | #15 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: Jersey
Age: 44
Posts: 4,855
Drives: to acquire tickets
Rep Power: 3524 |
I actually didnt get my AFR printout when I got tuned. I wish I knew where I was at, hmmmm.
__________________
Ryan 314WHP | 260LB-FT | STILLEN | KONI | SWIFT | STOPTECH | Z1 | PROJECT MU | CNT | UPREV | FORGESTAR | BRIDGESTONE | PWJDM | ENEOS | MOTUL |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
09 UpRev Tuned | nurseryboy | Tuning | 18 | 01-23-2011 10:26 PM |
Uprev Tuned ! | schrack150 | Tuning | 6 | 12-15-2010 03:28 PM |
UpRev tuned my car | kevin1985912 | Tuning | 6 | 08-02-2010 01:33 AM |
Got my car tuned with UpRev | G37Sam | Tuning | 116 | 05-01-2010 11:33 PM |
At UpRev getting the 370 Tuned | caneman88 | Nissan 370Z General Discussions | 46 | 10-31-2009 06:35 PM |