upRev questions

Josh@STILLEN · 10-14-2011, 04:13 PM

Quote:

Originally Posted by b1adesofcha0s

So you would have to pay a little extra to get the cable and access to Cipher, correct? What if you just buy a used uprev cable from someone?

$200 for the cable which also has a Cipher license.

Yes, you can purchase a used cable from someone, they are not married by VIN. You can also use the UpRev cable to trouble code check anything OBD-II (any newer vehicle).. as much as you want.

b1adesofcha0s · 10-14-2011, 04:18 PM

Quote:

Originally Posted by Josh@STILLEN

$200 for the cable which also has a Cipher license.

Yes, you can purchase a used cable from someone, they are not married by VIN. You can also use the UpRev cable to trouble code check anything OBD-II (any newer vehicle).. as much as you want.

Thanks for the clarification!

Compdoc777 · 12-13-2011, 07:46 AM

Quote:

Originally Posted by Josh@STILLEN

$200 for the cable which also has a Cipher license.

Yes, you can purchase a used cable from someone, they are not married by VIN. You can also use the UpRev cable to trouble code check anything OBD-II (any newer vehicle).. as much as you want.

This cable wouldn't be a Tatrix obd2 to USB would it?

Also how much gain all stock with a tune?

spdonegan · 12-19-2011, 02:42 PM

Should be getting my UpRev hardware (standard - may go to tuner later) so I'll see what cable it has. I have several other OBD-II cables (serial, USB and even a WiFi one).

Now to my question - 2011 370Z Coupe, AT, Stillen intake, Stillen exhaust, Stillen headers and Berk cats (both yet to be installed). So what RWHP should I expect. My math seems to say a bit north of 350 RWHP and I found one dyno sheet with everything but the headers that showed 338 RWHP - curious if anyone else has the same gear and results?

Happy Holidays!

prescott3656 · 12-20-2011, 09:22 AM

Quote:

Originally Posted by spdonegan

Should be getting my UpRev hardware (standard - may go to tuner later) so I'll see what cable it has. I have several other OBD-II cables (serial, USB and even a WiFi one).

Now to my question - 2011 370Z Coupe, AT, Stillen intake, Stillen exhaust, Stillen headers and Berk cats (both yet to be installed). So what RWHP should I expect. My math seems to say a bit north of 350 RWHP and I found one dyno sheet with everything but the headers that showed 338 RWHP - curious if anyone else has the same gear and results?

Happy Holidays!

Never seen anyone near 340whp with bolt-ons. Depends on the dyno, some read high, ideally, you get the dyno numbers before and after a mod and check the difference.

b1adesofcha0s · 12-20-2011, 09:35 AM

Quote:

Originally Posted by spdonegan

Should be getting my UpRev hardware (standard - may go to tuner later) so I'll see what cable it has. I have several other OBD-II cables (serial, USB and even a WiFi one).

Now to my question - 2011 370Z Coupe, AT, Stillen intake, Stillen exhaust, Stillen headers and Berk cats (both yet to be installed). So what RWHP should I expect. My math seems to say a bit north of 350 RWHP and I found one dyno sheet with everything but the headers that showed 338 RWHP - curious if anyone else has the same gear and results?

Happy Holidays!

Depends on the dyno really. Some read high while other read low. Most people with similar mods seem to average around 300-320 whp depending on the dyno. Anything higher than around 320 or so is probably a high reading dyno. Like prescott said though, it's only the change in whp from the mods that really matters.

12-19-2011, 02:42 PM	#4 (permalink)
spdonegan Base Member Join Date: Feb 2011 Location: Stanton, CA, USA Posts: 27 Drives: 11 Nissan 370Z Red A Rep Power: 15	UpRev cable and a question Should be getting my UpRev hardware (standard - may go to tuner later) so I'll see what cable it has. I have several other OBD-II cables (serial, USB and even a WiFi one). Now to my question - 2011 370Z Coupe, AT, Stillen intake, Stillen exhaust, Stillen headers and Berk cats (both yet to be installed). So what RWHP should I expect. My math seems to say a bit north of 350 RWHP and I found one dyno sheet with everything but the headers that showed 338 RWHP - curious if anyone else has the same gear and results? Happy Holidays!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UpRev Tune Questions...	Pelican170	Tuning	34	01-13-2012 01:26 PM
should I uprev?	ggiwin	Tuning	37	08-01-2011 08:17 AM
Uprev done!	sojirovskensi	Tuning	3	07-07-2011 01:45 AM
Uprev Osiris tuning questions	Rooskey	Tuning	33	10-11-2010 09:14 AM
Questions, questions and more questions for a potential 370z buyer!	tag824	Nissan 370Z General Discussions	67	09-18-2010 12:07 AM