09 UpRev Tuned

nurseryboy · 01-11-2011, 05:53 PM

Just got back from getting an UpRev tune. I was kinda hoping for a little more, but I think I may have been expecting too much with the few modes I have. (They are: R2C intake, ERZ high-flow cats, and eBay y-pipe.) I didn't get a printout of the base run, but it was 291 HP and 237 torque (SAE corrected). After a bunch of pulls (13 to be exact), we ended up at 297 HP and 242 torque. He tried a bunch of different things to try to get the most power, and keep things safe, and it seems like this was the best of both. Unfortunately, the weather is horrible here (snow and ice), so I haven't been able to really "try it out". Too bad I can't use the uncorrected numbers.. they were 318 HP and 260 torque, haha.

What do you guys think?

Matthew · 01-11-2011, 06:01 PM

If you don't mind what was the price for the tune? And what all did it intell? Thanks in advance

nurseryboy · 01-11-2011, 07:37 PM

Quote:

Originally Posted by Matthew

If you don't mind what was the price for the tune? And what all did it intell? Thanks in advance

Hey man, you're friends with ClemsonWill, right? He's the guy who helped me put on my springs and spacers. Small world, haha. I got this done at National Speed in Wilmington, btw.

Anyhow, they charge $550 for it (uprev license, tune/dyno time). I just called them up last week, scheduled a time, and showed up, haha. They took the car into their "dyno room", and started doing their stuff. I stood in and watched for pretty much the whole time (took a vid with my phone, but it's not amazing). It sounds awesome in an small area, though (think revving it under an overpass). It just takes some time for them to download the factory mappings, then dyno, then make changes and let the car cool down, then dyno again, then make more changes and cool down, and so on.

Overall great experience. They also fixed an intake hose that had a kink in it (replaced it with a better hose), although they charged me for it, haha.

Matthew · 01-11-2011, 08:24 PM

Yeah I know Will from way back, he is a good guy. He also offered go put my springs and spacers on but it's a 4 hour trip to his place so me and a buddy are gonna do it soon. It's cool there is an uprev close to her thanks for the info.

Kastley85891 · 01-13-2011, 10:33 PM

Any AFR before and after? seems decent numbers for mods

nurseryboy · 01-13-2011, 10:47 PM

Unfortunately, the printouts they gave me didn't include the AFR graph at the bottom (I'm pretty sure that's what's normally there). I've sent them an email asking for them with. I'll post them up if they get them to me.

SPOHN · 01-15-2011, 07:16 PM

Considering the mods, it seems about right. The base run was with the mods already on the car, right? So after getting it tuned and running properly it's about on par.

CrownR426 · 01-15-2011, 07:24 PM

Those are very generous numbers you got.
What kind of dyno is this?
I have dyno'd my z on the mustang dyno aka heart breaker and you definetly got amazing numbers compared to myself and my mods.

nurseryboy · 01-15-2011, 09:34 PM

Quote:

Originally Posted by SPOHN

Considering the mods, it seems about right. The base run was with the mods already on the car, right? So after getting it tuned and running properly it's about on par.

Yes, the base run was with the mods already on. So a gain of ~6HP and ~5ft/lb from the tune. Unfortunately I wasn't able to dyno it before the mods.

Quote:

Originally Posted by CrownR426

Those are very generous numbers you got.
What kind of dyno is this?
I have dyno'd my z on the mustang dyno aka heart breaker and you definetly got amazing numbers compared to myself and my mods.

It was a DynoJet. I know a lot of factors go into dyno results, and from what I hear, mustang dynos normally give lower numbers than dynojets, so it might not be that big of a deal

Christian370z got 309HP on his car with similar mods on a dynojet (difference is he had Stillen intakes, but with the hood up and fans blowing right on the intakes, I don't think it makes that much of a difference when dyno-ing), so I was kinda actually hoping for a little more. Although, his says "CF: STD", and mine is "CF: SAE". I don't know if that makes a difference or not.

nurseryboy · 01-15-2011, 09:47 PM

So I just did a little research, and there is a difference between STD and SAE. Other than the fact that the first one can mess up your nether-region, SAE is around 96 - 97% (at least according to the interwebs) of STD. So, if you take Christian's numbers and multiply by that, we're right around the same number. That makes me feel better

nurseryboy · 01-18-2011, 03:27 PM

Here's one of the dyno runs with the AFR info. Does everything look ok?

Kastley85891 · 01-18-2011, 04:40 PM

Looks a little lean accross the board for my liking but depends on where your tuner put his WB, would not really worry about that TBH.
Looks a fun ride.

nurseryboy · 01-18-2011, 05:10 PM

He had the sensor at the tailpipe. Could that explain the slightly leaner numbers?

Kastley85891 · 01-18-2011, 05:22 PM

Yes, TBH when I tune with either catted car or a non catted car I go from my Wideband AFR and just call it quits,, probe in pre Cat or exhuast I just shoot for a safe target, probably the same as your tuner ;-)

Like I said I would not worry, looks a smooth enough taper to redline.

nurseryboy · 01-18-2011, 05:39 PM

Sounds good! Thanks for the info!

01-11-2011, 05:53 PM	#1 (permalink)
nurseryboy Base Member Join Date: May 2010 Location: OBX NC Posts: 123 Drives: 09 BMW 135i Rep Power: 15	09 UpRev Tuned Just got back from getting an UpRev tune. I was kinda hoping for a little more, but I think I may have been expecting too much with the few modes I have. (They are: R2C intake, ERZ high-flow cats, and eBay y-pipe.) I didn't get a printout of the base run, but it was 291 HP and 237 torque (SAE corrected). After a bunch of pulls (13 to be exact), we ended up at 297 HP and 242 torque. He tried a bunch of different things to try to get the most power, and keep things safe, and it seems like this was the best of both. Unfortunately, the weather is horrible here (snow and ice), so I haven't been able to really "try it out". Too bad I can't use the uncorrected numbers.. they were 318 HP and 260 torque, haha. What do you guys think?

01-11-2011, 06:01 PM	#2 (permalink)
Matthew Track Member Join Date: Apr 2010 Location: Clemson, SC Posts: 519 Drives: Red Rocket Rep Power: 16	If you don't mind what was the price for the tune? And what all did it intell? Thanks in advance __________________

01-11-2011, 08:24 PM	#4 (permalink)
Matthew Track Member Join Date: Apr 2010 Location: Clemson, SC Posts: 519 Drives: Red Rocket Rep Power: 16	Yeah I know Will from way back, he is a good guy. He also offered go put my springs and spacers on but it's a 4 hour trip to his place so me and a buddy are gonna do it soon. It's cool there is an uprev close to her thanks for the info. __________________

01-13-2011, 10:33 PM	#5 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Any AFR before and after? seems decent numbers for mods __________________ Boosted V8 hunter 2850 lbs and 375WHP

01-15-2011, 07:16 PM	#7 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Considering the mods, it seems about right. The base run was with the mods already on the car, right? So after getting it tuned and running properly it's about on par. __________________

01-13-2011, 10:47 PM	#6 (permalink)
nurseryboy Base Member Join Date: May 2010 Location: OBX NC Posts: 123 Drives: 09 BMW 135i Rep Power: 15	Unfortunately, the printouts they gave me didn't include the AFR graph at the bottom (I'm pretty sure that's what's normally there). I've sent them an email asking for them with. I'll post them up if they get them to me.

01-15-2011, 07:24 PM	#8 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 848	Those are very generous numbers you got. What kind of dyno is this? I have dyno'd my z on the mustang dyno aka heart breaker and you definetly got amazing numbers compared to myself and my mods. __________________ Love + Hardwork + Passion RIP SVTRacer

01-15-2011, 09:47 PM	#10 (permalink)
nurseryboy Base Member Join Date: May 2010 Location: OBX NC Posts: 123 Drives: 09 BMW 135i Rep Power: 15	So I just did a little research, and there is a difference between STD and SAE. Other than the fact that the first one can mess up your nether-region, SAE is around 96 - 97% (at least according to the interwebs) of STD. So, if you take Christian's numbers and multiply by that, we're right around the same number. That makes me feel better

01-18-2011, 03:27 PM	#11 (permalink)
nurseryboy Base Member Join Date: May 2010 Location: OBX NC Posts: 123 Drives: 09 BMW 135i Rep Power: 15	Here's one of the dyno runs with the AFR info. Does everything look ok?

01-18-2011, 04:40 PM	#12 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Looks a little lean accross the board for my liking but depends on where your tuner put his WB, would not really worry about that TBH. Looks a fun ride. __________________ Boosted V8 hunter 2850 lbs and 375WHP

01-18-2011, 05:10 PM	#13 (permalink)
nurseryboy Base Member Join Date: May 2010 Location: OBX NC Posts: 123 Drives: 09 BMW 135i Rep Power: 15	He had the sensor at the tailpipe. Could that explain the slightly leaner numbers?

01-18-2011, 05:22 PM	#14 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Yes, TBH when I tune with either catted car or a non catted car I go from my Wideband AFR and just call it quits,, probe in pre Cat or exhuast I just shoot for a safe target, probably the same as your tuner ;-) Like I said I would not worry, looks a smooth enough taper to redline. __________________ Boosted V8 hunter 2850 lbs and 375WHP

01-18-2011, 05:39 PM	#15 (permalink)
nurseryboy Base Member Join Date: May 2010 Location: OBX NC Posts: 123 Drives: 09 BMW 135i Rep Power: 15	Sounds good! Thanks for the info!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Uprev Tuned !	schrack150	Tuning	6	12-15-2010 03:28 PM
Getting uprev tuned on Wednesday... anything i should know?	atx370z	Tuning	18	12-10-2010 01:41 AM
UpRev tuned my car	kevin1985912	Tuning	6	08-02-2010 01:33 AM
Got my car tuned with UpRev	G37Sam	Tuning	116	05-01-2010 11:33 PM
At UpRev getting the 370 Tuned	caneman88	Nissan 370Z General Discussions	46	10-31-2009 06:35 PM