Uprev/tuner Near Oklahoma

Moemeister · 11-15-2010, 09:22 AM

Looking for a good shop with dyno and uprev licenses. It does not have to be Oklahoma local. Currently only shop here that could is "Failsafe Performance" but their website is down O.o I'm not against driving to TX. Anything within 3-4hrs is OK. Intend doing this on Wednesday this week. Anyone who could direct me to a decent shop would be much appreciated.

wakeboardr116 · 11-22-2010, 09:50 AM

Hey this is Alex with the G37. I know Failsafe closed up recently but if you want I can get you chris's contact info. I was up at the shop last month before he closed up and he said he was still gonna try and do tuning stuff on the side. He tuned my car for me and did a great job.

Trese7en · 11-22-2010, 07:46 PM

^ Closed for the winter right?

Chris@FsP · 11-22-2010, 08:04 PM

We have closed the doors indefinitely, at least until the economy gets out of this slump and people start spending money again. As Alex said, we are still UpRev dealers and will be doing tuning on the side, using Humble's dyno.

Moemeister · 12-16-2010, 03:51 PM

Got UpRev tuned by Wayne @ T1RaceDevelopment in Rowlett, TX Wednesday last week. Noticed a gain from 288whp base pull to 300.15whp and 20* ignition advance on 91octane and 308.65whp and 24*+ ignition advance on 93+octane(w/91 in the tank tune is set to do 26*+ but pulled timing to 24 w/the 91 so true numbers on 93+ are prolly just a tad higher.)

Maps:
1: 91 octane tune
2: 93+ octane tune
3: 91 octane tune w/cold map same as hot for consistency on the track
4: Stock
5: Vallet/Anti-theft

I was very impressed with Wayne and Tony's knowledge when it comes to tunning. Their shop is also awesome. Unfortunately I was not super impressed with the UpRev software. Still needs a lot of added features but not a bad system. If all the ability to adjust cam timing and vvel was there (like the AP for the GTR) I think I would have been able to overlook the clumsy software... Maybe if it were all in one program too and you didn't have to open 2 different apps and juggle back and forth between the two.
Whenever they unlock the parameters for vvel (rumored early/mid '11) I think it will be awesome.

wakeboardr116 · 12-17-2010, 06:18 PM

Awesome man. Your gains for 91 octane are right on par with what I got out of mine. Sometime I'd like to get a tune for 93 just to see what it can do (stupid Oklahoma with its 91 everywhere). On 91 my ignition timing was right around 25-26* after the tune. The ECU will start to adapt to the new settings as you drive more and actually start to advance it even more. I've data logged a few runs and now that my ECU has adapted it hitting around 28-29*.

What were your TQ numbers? And do you have any charts to post up? I'm interested to see how the gains are across the power band.

Moemeister · 12-18-2010, 08:07 AM

Quote:

Originally Posted by wakeboardr116

Awesome man. Your gains for 91 octane are right on par with what I got out of mine. Sometime I'd like to get a tune for 93 just to see what it can do (stupid Oklahoma with its 91 everywhere). On 91 my ignition timing was right around 25-26* after the tune. The ECU will start to adapt to the new settings as you drive more and actually start to advance it even more. I've data logged a few runs and now that my ECU has adapted it hitting around 28-29*.

What were your TQ numbers? And do you have any charts to post up? I'm interested to see how the gains are across the power band.

Ya I have a chart just haven't had a chance to get to my house And upload it. House has been getting remodeled for a month now so wife n i have been at my bro in laws and he has 0 internet >< been stuck using the phone LOL
When I get a chance tonight ill look at it... maybe take a pic w/my phone or sumthin LOL

11-15-2010, 09:22 AM	#1 (permalink)
Moemeister Base Member Join Date: Jul 2009 Location: Oklahoma City Posts: 26 Drives: 09 MB 370z 6spd Rep Power: 16	Uprev/tuner Near Oklahoma Looking for a good shop with dyno and uprev licenses. It does not have to be Oklahoma local. Currently only shop here that could is "Failsafe Performance" but their website is down O.o I'm not against driving to TX. Anything within 3-4hrs is OK. Intend doing this on Wednesday this week. Anyone who could direct me to a decent shop would be much appreciated.

12-16-2010, 03:51 PM	#5 (permalink)
Moemeister Base Member Join Date: Jul 2009 Location: Oklahoma City Posts: 26 Drives: 09 MB 370z 6spd Rep Power: 16	Got UpRev tuned by Wayne @ T1RaceDevelopment in Rowlett, TX Wednesday last week. Noticed a gain from 288whp base pull to 300.15whp and 20* ignition advance on 91octane and 308.65whp and 24+ ignition advance on 93+octane(w/91 in the tank tune is set to do 26+ but pulled timing to 24 w/the 91 so true numbers on 93+ are prolly just a tad higher.) Maps: 1: 91 octane tune 2: 93+ octane tune 3: 91 octane tune w/cold map same as hot for consistency on the track 4: Stock 5: Vallet/Anti-theft I was very impressed with Wayne and Tony's knowledge when it comes to tunning. Their shop is also awesome. Unfortunately I was not super impressed with the UpRev software. Still needs a lot of added features but not a bad system. If all the ability to adjust cam timing and vvel was there (like the AP for the GTR) I think I would have been able to overlook the clumsy software... Maybe if it were all in one program too and you didn't have to open 2 different apps and juggle back and forth between the two. Whenever they unlock the parameters for vvel (rumored early/mid '11) I think it will be awesome. Last edited by Moemeister; 12-16-2010 at 04:12 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UPRev Pro Tuner in North East	NYBladeZ	North East Region	51	11-09-2010 01:11 PM
FS: UPREV Osiris Full Tuner Package!!!	NIZMOZ	Parts for sale (Private Classifieds)	3	08-29-2010 08:50 PM
Watch for Import Tuner Maazine - 370Z Mods Evaluation, Stillen/Uprev	370Zsteve	Intake/Exhaust	9	07-25-2010 06:25 PM
Anyone in Oklahoma??	RAZ76	Wheels & Tires	5	12-01-2009 08:09 AM
Greetings from Oklahoma City	RAZ76	New Forum Member	8	10-30-2009 11:36 PM

11-22-2010, 09:50 AM	#2 (permalink)
wakeboardr116 Base Member Join Date: Dec 2009 Location: Edmond, OK Posts: 36 Drives: 08 Infiniti G37s Rep Power: 15	Hey this is Alex with the G37. I know Failsafe closed up recently but if you want I can get you chris's contact info. I was up at the shop last month before he closed up and he said he was still gonna try and do tuning stuff on the side. He tuned my car for me and did a great job.

11-22-2010, 07:46 PM	#3 (permalink)
Trese7en Base Member Join Date: Dec 2009 Location: Oklahoma Posts: 38 Drives: '09 G37 Rep Power: 15	^ Closed for the winter right?

11-22-2010, 08:04 PM	#4 (permalink)
Chris@FsP Enthusiast Member Join Date: Dec 2009 Location: Tulsa, OK Posts: 430 Drives: 2008 350Z TT Rep Power: 368	We have closed the doors indefinitely, at least until the economy gets out of this slump and people start spending money again. As Alex said, we are still UpRev dealers and will be doing tuning on the side, using Humble's dyno.

12-17-2010, 06:18 PM	#6 (permalink)
wakeboardr116 Base Member Join Date: Dec 2009 Location: Edmond, OK Posts: 36 Drives: 08 Infiniti G37s Rep Power: 15	Awesome man. Your gains for 91 octane are right on par with what I got out of mine. Sometime I'd like to get a tune for 93 just to see what it can do (stupid Oklahoma with its 91 everywhere). On 91 my ignition timing was right around 25-26* after the tune. The ECU will start to adapt to the new settings as you drive more and actually start to advance it even more. I've data logged a few runs and now that my ECU has adapted it hitting around 28-29*. What were your TQ numbers? And do you have any charts to post up? I'm interested to see how the gains are across the power band.