UpRev E-Tune's?

flashburn · 07-14-2010, 04:57 PM

So has anyone here purchased the $500 UpRev package that comes with 3 E-Tunes? Just wondering how things went, and if all three were needed to get a good tune in the end?

Diocletian · 07-15-2010, 09:19 AM

Please view my thread there's right next to this one! It will answer all your questions and the tuner, HP Logic, is located right by you!

flashburn · 07-15-2010, 09:26 AM

I saw your thread, but I'm asking about the E-Tunes and not a tune from a shop.

HP Logic · 07-18-2010, 09:40 PM

The E-tune process requires you to have some data from running on the dyno/track to ensure and test that the changes being made are positive. If you are familiar with datalogging and collecting test info then you will have no problem. Without a proper environment for getting this info you will not be able to get the setup dialed in perfectly...I usually need to do about 3-4 flashes to get everything perfect on the dyno...and that is with the car sitting right in front of me....lol.

-Jack

flashburn · 07-18-2010, 09:48 PM

What if I have a private road I can do 0-60's on? Just straight shots. I could probably get up to about 80 safely.

Jordo! · 07-18-2010, 11:24 PM

Quote:

Originally Posted by flashburn

What if I have a private road I can do 0-60's on? Just straight shots. I could probably get up to about 80 safely.

If they can adjust in tip-in tuning, you can do that in an empty parking lot.

edconline · 07-19-2010, 01:07 PM

I purchased the Osiris Standard and just did my datalogging for the etune last week. It says there is about a 2 week turn around for etunes, so hopefully I'll see the new tune sometime next week. Will let you know how it goes.

flashburn · 07-19-2010, 01:08 PM

Cool, thanks edconline! What kind of driving did you do while datalogging? Did they give you any guidance?

edconline · 07-19-2010, 01:53 PM

It says for the etunes that they require two 0-60 pulls and one city/hwy cruising log. I used the performance logging feature for the 0-60 runs, this will start logging data as soon as the car starts moving and stop when you reach the target speed. (I did many runs, and just sent two of the better ones with decent launches)

This was the first time I had done any full throttle burns from a stop, and I found out launching the car was harder than I had expected. None of the 0-60's I did were amazing but hopefully the ones I sent will suffice.

On another note, I'm still not sure how they tested this car 0-60 at 4.7s as the program recorded my best run at 6.0s. (Granted this was my first time doing these pulls, and I had some trouble getting into second gear at redline, after a couple missed shifts and some gear grinding I started shifting to second at around 6800 and it seemed to go into gear a lot easier.) I'm sure the B&M SS is helping a bit, but I think the stock clutch is definately gonna go as soon as there is a good replacement solution out there.

For my cruising log, I just started the logging and drove around town for about 5 mins. They do give a list of parameters that must be included in the data log so I just made sure I had those all selected.

flashburn · 07-19-2010, 02:05 PM

Nice, thanks again. Doesn't sound like too much work, as long as the tune you get back is decent.

edconline · 08-02-2010, 10:31 PM

Got the new tune back a while ago and I am VERY impressed with the results. The tuner mentioned that the car was running rich and he leaned out the target AFR's. Not sure what else was adjusted but it definately pulls a lot harder in every gear now, especially at higher revs. Much more of a difference then I expected, I have to change how I'm shifting now! I may go get it dyno tuned sometime down the road anyways just to see if they can squeeze a bit more out of it but for now, this has been an awesome solution.

flashburn · 08-02-2010, 10:49 PM

That's pretty cool, thanks for the update. Now I wish they would just email me back about some questions I had. You would think a company would be better about trying to get someones business, but I guess not.

flashburn · 08-02-2010, 10:50 PM

One question I do have is if the $500 package is all I would need to be able to revert completely back to stock if I have to take the car in for warranty work? Any idea if it is an easy process?

djpathfinder · 08-02-2010, 11:09 PM

Wait a sec, Flashburn...your signature says you have the Cobb AP with canned tune. Don't you just "uninstall" the AP if you don't want it anymore? They won't be looking for your ECM map when doing warranty work.

edconline · 08-03-2010, 12:39 AM

Uprev includes a 'back to stock' map so you can reflash the ecu back, glanced at the instructions and it seemed simple.

07-14-2010, 04:57 PM	#1 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	UpRev E-Tune's? So has anyone here purchased the $500 UpRev package that comes with 3 E-Tunes? Just wondering how things went, and if all three were needed to get a good tune in the end?

07-15-2010, 09:19 AM	#2 (permalink)
Diocletian Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 350 Drives: 09 370z CY A7 Rep Power: 15	Please view my thread there's right next to this one! It will answer all your questions and the tuner, HP Logic, is located right by you! __________________ Injen Dual CAI \| Illuminated Kick plates \| Stillen Sway bar kit \| F.I TDX w/ 12" Resonators \| F.I HFC's \| UpRev Tune \| 300HP/225tq Mustang Dyno

07-18-2010, 09:40 PM	#4 (permalink)
HP Logic The370Z.com Sponsor Join Date: Mar 2009 Location: Wellington, FL Posts: 51 Drives: 1993 mazda rx7 5spd Rep Power: 217	The E-tune process requires you to have some data from running on the dyno/track to ensure and test that the changes being made are positive. If you are familiar with datalogging and collecting test info then you will have no problem. Without a proper environment for getting this info you will not be able to get the setup dialed in perfectly...I usually need to do about 3-4 flashes to get everything perfect on the dyno...and that is with the car sitting right in front of me....lol. -Jack __________________ http://i15.photobucket.com/albums/a3..._Sig_02-01.jpg Jack Cecil HorsepowerLogic.com

07-19-2010, 01:07 PM	#7 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	I purchased the Osiris Standard and just did my datalogging for the etune last week. It says there is about a 2 week turn around for etunes, so hopefully I'll see the new tune sometime next week. Will let you know how it goes. __________________ View Journal Audio Build

07-19-2010, 01:53 PM	#9 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	It says for the etunes that they require two 0-60 pulls and one city/hwy cruising log. I used the performance logging feature for the 0-60 runs, this will start logging data as soon as the car starts moving and stop when you reach the target speed. (I did many runs, and just sent two of the better ones with decent launches) This was the first time I had done any full throttle burns from a stop, and I found out launching the car was harder than I had expected. None of the 0-60's I did were amazing but hopefully the ones I sent will suffice. On another note, I'm still not sure how they tested this car 0-60 at 4.7s as the program recorded my best run at 6.0s. (Granted this was my first time doing these pulls, and I had some trouble getting into second gear at redline, after a couple missed shifts and some gear grinding I started shifting to second at around 6800 and it seemed to go into gear a lot easier.) I'm sure the B&M SS is helping a bit, but I think the stock clutch is definately gonna go as soon as there is a good replacement solution out there. For my cruising log, I just started the logging and drove around town for about 5 mins. They do give a list of parameters that must be included in the data log so I just made sure I had those all selected. __________________ View Journal Audio Build

07-15-2010, 09:26 AM	#3 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	I saw your thread, but I'm asking about the E-Tunes and not a tune from a shop.

07-18-2010, 09:48 PM	#5 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	What if I have a private road I can do 0-60's on? Just straight shots. I could probably get up to about 80 safely.

07-19-2010, 01:08 PM	#8 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	Cool, thanks edconline! What kind of driving did you do while datalogging? Did they give you any guidance?

07-19-2010, 02:05 PM	#10 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	Nice, thanks again. Doesn't sound like too much work, as long as the tune you get back is decent.

08-02-2010, 10:31 PM	#11 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Got the new tune back a while ago and I am VERY impressed with the results. The tuner mentioned that the car was running rich and he leaned out the target AFR's. Not sure what else was adjusted but it definately pulls a lot harder in every gear now, especially at higher revs. Much more of a difference then I expected, I have to change how I'm shifting now! I may go get it dyno tuned sometime down the road anyways just to see if they can squeeze a bit more out of it but for now, this has been an awesome solution. __________________ View Journal Audio Build

08-02-2010, 10:49 PM	#12 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	That's pretty cool, thanks for the update. Now I wish they would just email me back about some questions I had. You would think a company would be better about trying to get someones business, but I guess not. __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

08-02-2010, 10:50 PM	#13 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	One question I do have is if the $500 package is all I would need to be able to revert completely back to stock if I have to take the car in for warranty work? Any idea if it is an easy process? __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

08-02-2010, 11:09 PM	#14 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	Wait a sec, Flashburn...your signature says you have the Cobb AP with canned tune. Don't you just "uninstall" the AP if you don't want it anymore? They won't be looking for your ECM map when doing warranty work. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

08-03-2010, 12:39 AM	#15 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Uprev includes a 'back to stock' map so you can reflash the ecu back, glanced at the instructions and it seemed simple. __________________ View Journal Audio Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Uprev map switching	tao168	Tuning	25	07-21-2010 04:22 PM
Looking to do an Uprev Tune	Zeto	North East Region	12	07-12-2010 05:04 PM
Got my car tuned with UpRev	G37Sam	Tuning	116	05-01-2010 11:33 PM
Uprev Tune	jpit	Tuning	10	01-13-2010 07:23 PM
At UpRev getting the 370 Tuned	caneman88	Nissan 370Z General Discussions	46	10-31-2009 06:35 PM