Tuning data for E85 or E100 on the VQ37

SG4247 · 05-22-2018, 07:57 PM

I know this may be a stretch, but does anyone have ignition and AFR dyno data that they would share - for the VQ engine on E85?

I am using EcuTek for my my E85 tune, and would like to know what others experienced as MBT and best AFR for their cars using this fuel.

ByThaBay · 05-23-2018, 06:25 AM

Quote:

Originally Posted by SG4247

I know this may be a stretch, but does anyone have ignition and AFR dyno data that they would share - for the VQ engine on E85?

I am using EcuTek for my my E85 tune, and would like to know what others experienced as MBT and best AFR for their cars using this fuel.

I can share some info with you, pm sent.

SG4247 · 05-25-2018, 01:42 PM

Anyone else have any data they would be willing to share?

I have my WOT AFR running at 12.5-12.8 on the Ecutek data logs with exactly 80% ethanol.

This is with the DA at 3400 ft. So, hot, humid, basically... bad conditions. I am thinking closer to 12.0 would be better for power...

Any thoughts would be appreciated.

Hotrodz · 05-25-2018, 05:37 PM

You are fine in the mid 12s...12.2 to 12.5. My AFR is 14.6 to 14.8 at idle and low to mid 12s under load and I am at 3,500'. Rich is better than lean!

Sent from my SM-G965U using Tapatalk

SG4247 · 05-25-2018, 05:47 PM

Quote:

Originally Posted by Hotrodz

You are fine in the mid 12s...12.2 to 12.5. My AFR is 14.6 to 14.8 at idle and low to mid 12s under load and I am at 3,500'. Rich is better than lean!

Sent from my SM-G965U using Tapatalk

Thank you!

Is that with what Ethanol %? I am finding that a small change in ethanol content, has a large impact on AFR. I dont currently use an ethanol sensor, so I need to watch the percentages closely, certainly for WOT use.

Hotrodz · 05-25-2018, 06:35 PM

Quote:

Originally Posted by SG4247

Thank you!

Is that with what Ethanol %? I am finding that a small change in ethanol content, has a large impact on AFR. I dont currently use an ethanol sensor, so I need to watch the percentages closely, certainly for WOT use.

Hmm, I am flex fueled and all is run by EcuTek. Mine does not very much between 91 craptane or e90 114 octane Ignite. I don't know who your tuner is but Seb at Specialty Z can dial it in for ya! Oh and you need to burn some e90 it is nectar to the car gods!

Sent from my SM-G965U using Tapatalk

SG4247 · 05-25-2018, 09:59 PM

Did you guys find a sweet spot for power in the timing curve?

Some guys tell me E85 likes the same timing as a gasoline tune, or maybe even a little less.

On my may methanol V8 race engines, there is always a minimum timing value were the engine would just max out on the dyno, and more timing just would not improve the power. I am curious if the VQ3.7 is the same way. Mine is currently going from 25 to 29 degrees in every gear.

Hotrodz · 05-25-2018, 11:20 PM

Quote:

Originally Posted by SG4247

Did you guys find a sweet spot for power in the timing curve?

Some guys tell me E85 likes the same timing as a gasoline tune, or maybe even a little less.

On my may methanol V8 race engines, there is always a minimum timing value were the engine would just max out on the dyno, and more timing just would not improve the power. I am curious if the VQ3.7 is the same way. Mine is currently going from 25 to 29 degrees in every gear.

That is beauty of e85 is is that you can pull more time and you are correct at some point it doesn't help anymore. The better the ethanol the more timing can be pulled to take advantage of the octane. I gained additional who because Seb was able to the control torque by taking out timing!

Sent from my SM-G965U using Tapatalk

05-22-2018, 07:57 PM	#1 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	Tuning data for E85 or E100 on the VQ37 I know this may be a stretch, but does anyone have ignition and AFR dyno data that they would share - for the VQ engine on E85? I am using EcuTek for my my E85 tune, and would like to know what others experienced as MBT and best AFR for their cars using this fuel.

05-25-2018, 05:37 PM	#4 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	You are fine in the mid 12s...12.2 to 12.5. My AFR is 14.6 to 14.8 at idle and low to mid 12s under load and I am at 3,500'. Rich is better than lean! Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Upgrades - Admin Tuning 3'' Intakes, EPS Tuning BB TB's, AAM Comp Intake Manifold	1cintron	Intake/Exhaust	20	10-20-2018 11:57 AM
Navigation Data	MULDER	Audio & Video	0	05-12-2014 02:22 PM
Visconti Tuning heading to Toledo, Ohio for EcuTek Tuning !	visconti	Mid Western Region	0	04-28-2013 11:41 PM
Black Friday Tuning Tuning Specials at R/T Tuning	Erik@RTTuning	Drivetrain/Engine	0	11-23-2012 02:46 PM

05-25-2018, 01:42 PM	#3 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	Anyone else have any data they would be willing to share? I have my WOT AFR running at 12.5-12.8 on the Ecutek data logs with exactly 80% ethanol. This is with the DA at 3400 ft. So, hot, humid, basically... bad conditions. I am thinking closer to 12.0 would be better for power... Any thoughts would be appreciated.

05-25-2018, 09:59 PM	#7 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	Did you guys find a sweet spot for power in the timing curve? Some guys tell me E85 likes the same timing as a gasoline tune, or maybe even a little less. On my may methanol V8 race engines, there is always a minimum timing value were the engine would just max out on the dyno, and more timing just would not improve the power. I am curious if the VQ3.7 is the same way. Mine is currently going from 25 to 29 degrees in every gear.