![]() |
how much boost are you running
Guys I am getting tuned and my tuner is saying that i should keep it at 12 psi with my aam TT kit...i was thinking that the norm would be at 15..what are you all running
|
15 is quite a bit, but its kind of an apples-to-oranges conversation unless you are comparing to someone with similar mods and kit...
my wastegate pressure is set to 8.5psi, but I can creep all the way to 10.5psi. |
This depends on mods and the type of fuel you are running. My over boost is set to 15 psi and my max boost is 14 and that is on e90. I don't think I was ever over 12 even on race fuel. It also depends on how much torque your motor makes. Some motors make good whp and the tq is manageable. Mine makes tq and so my top in whp is limited. My last tune Seb kept my whp to 610 because my tq was 560. Most motors pushing that much tq are at about 650whp on a stock motor.
Sent from my SM-N910P using Tapatalk |
Quote:
|
I running my 2015 supercharger at 12.5 and my 2017 single turbo at 13 ... plan on taking the turbo to 14-15 on next dyno trip ..... both on 93 oct
|
15psi on 11:1CR on pump gas.....what a time to be alive
|
I am running 620hp/550tq on 13psi with E85 and precision 6766.
|
I'm running 14 lbs at 624/500 on pump gas 93
BP kit with the 6766 |
Quote:
I run 13.5-14psi max on E85. Power numbers below |
Quote:
|
Quote:
12-13 sounds pretty good for 93 octane fuel.....It appears 600ft.lbs. to be the line not to cross on the stock block also (if you want to get some life from it). I'm not boosted yet; but i do pay attention to build threads,,,meth injected 93 boost allows a bit more /as it keeps cylinder temps cooler; but your tuner doesn't want to see you go "BOOM" on his Dyno either. Use quality/consistent fuels. |
All times are GMT -5. The time now is 06:53 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2