Ecutek and the base 370z

dvboy · 08-30-2017, 04:24 PM

Just hoping someone can chime in here,can the base 370z without SynchroRev matching take advantage of the features like Flat foot shifting and Launch control?Thanks in advance.

TreeSemdyZee · 08-30-2017, 05:50 PM

Nope.

http://www.ecutek.com/News/EcuTek-Re...CU-Nissan-370Z

dvboy · 09-01-2017, 12:29 PM

A little confusing,just came across this thread that states to the contrary....
flat foot shifting on ecutek for non sport pkg

Jayhovah · 09-01-2017, 12:50 PM

Ecutek is actually very responsive over email. I would just ask them and then report back here for future searches. =)

dvboy · 09-01-2017, 01:49 PM

Quote:

Originally Posted by Jayhovah

Ecutek is actually very responsive over email. I would just ask them and then report back here for future searches. =)

Done,will report back with their reply when it comes.

dvboy · 09-04-2017, 08:23 AM

I got my reply from Ecutek,they confirmed that these features will NOT work with the base model without synchrorev matching.Unless someone can chime in a say they actually did it,I am going to assume they are right.

dvboy · 09-04-2017, 08:49 PM

Well the plot thickens,I contacted Seb at Specialty-Z and he said u absolutely can use those features on a base without synchrorev matching.Go figure

Ventruck · 09-04-2017, 10:55 PM

Considering such features could be added to the 86 and WRX, as well as auto-blip (not quite the same as rev match), not sure what the limitation is for a base Z. It's an electronic throttle no matter how you cut it.

Jayhovah · 09-05-2017, 09:28 AM

Quote:

Originally Posted by dvboy

Well the plot thickens,I contacted Seb at Specialty-Z and he said u absolutely can use those features on a base without synchrorev matching.Go figure

Sounds like we need to get Seb and Ecutek on the line together for the benefit of everyone.

dvboy · 09-06-2017, 08:31 AM

Ecutek has exchanged a few emails with me,they are following up on this.The last email I got they admitted that if the base model has a switch at both the top and bottom end of travel for the clutch(it does) then it should work.I told them to contact Seb to confirm it for themselves.

Jayhovah · 09-06-2017, 10:00 AM

Quote:

Originally Posted by dvboy

Ecutek has exchanged a few emails with me,they are following up on this.The last email I got they admitted that if the base model has a switch at both the top and bottom end of travel for the clutch(it does) then it should work.I told them to contact Seb to confirm it for themselves.

Nice job following through. This could benefit a ton of people, some not even in this community. Rep'd!

iiamburrii · 02-21-2018, 07:37 AM

I'm bringing my touring version to get it tune. Any follow-up on this? I was told as well that they can't add any of the racerom features because they are controlled with the S mode button.

JARblue · 02-21-2018, 09:18 AM

If Seb says it can be done, then it can be done. You can always email him to confirm. He is incredibly responsive.

ihiryu · 02-21-2018, 12:12 PM

I've done a base model with ECUTek that had the flat foot shifting and LC. I know when I firstbecame a tuner for ecutek, I read that it wasn't applicable for the base models, but I went ahead and flashed his car, and viola, it has it.

Kabestro · 02-21-2018, 09:30 PM

I have a base with flat foot shifting and launch control with Uprev ARC license. If Uprev can do it I'm pretty sure Ecutek can too.

08-30-2017, 04:24 PM	#1 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 26	Ecutek and the base 370z Just hoping someone can chime in here,can the base 370z without SynchroRev matching take advantage of the features like Flat foot shifting and Launch control?Thanks in advance. __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

08-30-2017, 05:50 PM	#2 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,886 Drives: '09 370 & ‘14 Juke Rep Power: 27409	Nope. http://www.ecutek.com/News/EcuTek-Re...CU-Nissan-370Z __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb Last edited by TreeSemdyZee; 08-30-2017 at 05:53 PM.

09-01-2017, 12:29 PM	#3 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 26	A little confusing,just came across this thread that states to the contrary.... flat foot shifting on ecutek for non sport pkg __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

09-04-2017, 08:23 AM	#6 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 26	I got my reply from Ecutek,they confirmed that these features will NOT work with the base model without synchrorev matching.Unless someone can chime in a say they actually did it,I am going to assume they are right. __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

09-04-2017, 08:49 PM	#7 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 26	Well the plot thickens,I contacted Seb at Specialty-Z and he said u absolutely can use those features on a base without synchrorev matching.Go figure __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

09-04-2017, 10:55 PM	#8 (permalink)
Ventruck Track Member Join Date: Jun 2016 Location: California Posts: 785 Drives: '13 Sport+Touring M6 Rep Power: 22898	Considering such features could be added to the 86 and WRX, as well as auto-blip (not quite the same as rev match), not sure what the limitation is for a base Z. It's an electronic throttle no matter how you cut it.

09-06-2017, 08:31 AM	#10 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 26	Ecutek has exchanged a few emails with me,they are following up on this.The last email I got they admitted that if the base model has a switch at both the top and bottom end of travel for the clutch(it does) then it should work.I told them to contact Seb to confirm it for themselves. __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

02-21-2018, 07:37 AM	#12 (permalink)
iiamburrii Base Member Join Date: Oct 2016 Location: Virginia Posts: 3 Drives: 09 370z BS M6 Rep Power: 9	I'm bringing my touring version to get it tune. Any follow-up on this? I was told as well that they can't add any of the racerom features because they are controlled with the S mode button.

02-21-2018, 09:18 AM	#13 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	If Seb says it can be done, then it can be done. You can always email him to confirm. He is incredibly responsive. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-21-2018, 12:12 PM	#14 (permalink)
ihiryu Base Member Join Date: Oct 2016 Location: TX Posts: 141 Drives: 2013 Nismo 370z 6MT Rep Power: 34	I've done a base model with ECUTek that had the flat foot shifting and LC. I know when I firstbecame a tuner for ecutek, I read that it wasn't applicable for the base models, but I went ahead and flashed his car, and viola, it has it.

02-21-2018, 09:30 PM	#15 (permalink)
Kabestro Enthusiast Member Join Date: Aug 2012 Location: Puerto Rico Posts: 331 Drives: 13 Nissan 370Z MR M6 Rep Power: 40	I have a base with flat foot shifting and launch control with Uprev ARC license. If Uprev can do it I'm pretty sure Ecutek can too. __________________ Stillen Gen 3 CAI / Fast Intentions HFC and CBE 12" Res. (#730) / Swift Springs / 20mm H&R Spacers / Clutch Helper Spring / UpRev Tune 322whp.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM vs GTR Spark plugs for NA 370z w/ ecutek tune	Patrickz34	Engine & Drivetrain	4	04-10-2016 09:00 PM
First 2016 370Z Tuned with EcuTek !	visconti	Tuning	1	07-18-2015 11:42 PM
EcuTek Releases another update for 370Z !	visconti	Tuning	2	06-11-2015 11:56 AM
EcuTek Tuning on the 370z now available!	R/T Tuning	R/T Tuning	9	01-23-2014 10:20 AM