Uprev vs Ecutek

Spartan 1771

I realize the gains here are pretty significant and that's the important thing, but I'm curious to know why are the overall numbers are so low? On average, it seems as if a brand new stock Z makes around 285 rwhp. Why is your best run showing just that with all of these modifications?

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

redondoaveb

He made almost 318 with ecutek.

Spartan 1771

Ok, I'm an idiot. I wasn't looking at the bar graph, just at the red and blue numbers listed on the graph: 287.393 (red), 258.652 (blue), etc. Now that I realize my mistake, 318 makes perfect sense.

Thanks for pointing this out.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

redondoaveb

It threw me off too. Post up your results after your tune today.

Spartan 1771

These results are better then I could have hoped for. This seems pretty high, but the car feels pretty damn fast.

The tune pretty much cleaned up all of the throttle lag, the idle is much smoother and it feels smoother all the way through the powerband. It feels much more responsive and it is seriously noticable in the higher Rpms. I didn't get to play with it much today. Rush hour traffic prevented that from happening. I will definitely play with it more this weekend.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

redondoaveb

Wow, those are great numbers. That's what most guy's are hoping to see and end up seeing about 20hp less. Nice job!

Spartan 1771

I've read a lot about dyno dynamics being a real heart breaker because they are usually 1-2% lower then a Dynojet. It sure didn't break my heart!

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

jmroy6

This dyno obviously reads lower than others that have been posted on the forum. all dynos will read different, there are just to many variables to factor in. i made 316whp on this dyno with the same tuner and similar mods.

Attached Images

IMG_1110.jpg (431.8 KB, 40 views)

__________________
2012 370z GTM SC

Spartan 1771

Interesting. Thanks for the reply.

I'm scheduled to have Ecutek installed tomorrow by a master tuner. I'm looking forward to the results.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...