How to get my "Catalytic Converter Efficency" Ready?

Cell

My current tune with Uprev has my "Catalytic Converter Efficiency" as not supported. Can someone please help me out and show me how to turn it on so it can be ready and so I can pass emissions? Is there even a way for me to turn that monitor on in Uprev?

Thanks

SouthArk370Z

hmmm. A web search for 'Uprev "Catalytic Converter Efficiency"' only turns up this thread and searching the Uprev site for 'Catalytic Converter Efficiency' returns zero results. Subbed to see if someone comes up with an answer.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

fryzia23

If you have uprev standard cable, call your tuner to send you a updated tune with all monitors turned on. Then flash it onto your ecu. Once passed inspection you can flash your original tune back. To turn on and off the monitors, you would need osiris tuner version with unlocked tune. I would imagine that most of custom tunes are locked by the tuner so you don't mess with it.

Cell

I figured it out.

With the standard cable you need a tuner to make the change.

If you have the full tuner cable then you can just open with ROM Editor and edit your tune. You then navigate around till you see Catalytic Efficiency, not the exact term used in the editor but close, and click it to turn it on. There will be two to turn on. Now my OBDII scanner reads it and I just have to drive till it is ready.

My car is boosted with no cats. I can still pass emissions here in Chicago but I just need all the monitors they look for to be ready to take it in. The trick is to get it in right after resetting the ECU and driving it till all monitors are ready before any codes pop.

GaleForce

Let me know how that works out. I'm guessing you might need extended bungs for the O2 sensors.

I have to take my car in for testing too.

__________________

Cell

I passed with the BP kit for the last inspection 2 years ago. That is without the extended bungs for the O2 sensors.

I don't know how Canada does inspections but if they do visuals then you will fail with the BP kit.

Here in Chicago, they only look for three monitors to be ready. Catalytic efficiency, EVAP and O2 Sensor. Once all three is ready with no codes, you can take the car in and it will pass.

GaleForce

This is a sample test. It's strictly OBDII.

Untitled

This is what my scanner shows,



I have a localish guy that offered to hook my car up for free to see if it would pass. His initial thoughts is that it looks good. I don't have that kind of luck. I am sure I'll have several hoops that I need to jump through for it to pass.

__________________

Cell

This is what I had when I passed with the BP kit 2 years ago.

Sent from my SM-G935T using Tapatalk