2014 370Z stock baseline dyno run

FNR32 · 12-07-2015, 08:06 PM

Car: Stock
Year: 2014
Miles: 3880
Dyno: Dynojet
Tuner:Trussville, AL

I really had no expectations going in. I knew that I wanted to see something north of 275 and I got that. Looks like almost exactly 16% drivetrain loss with bhp being 332. Thoughts/input always welcome. I did a total of 3 pulls. The first one we lost the signal halfway though the run and I think it was maybe 240-245hp. On the 2nd run we thought we got it fixed, but didn't get a TQ reading due to there still being a signal issues, but the HP was 278whp. On the final run, we got a reading both hp and tq. I got the idea of take the filters out on this run to see if there was any increase in HP or TQ. A stock F150 that was there earlier had gained literally 16whp from cracking open the airbox, so I figured why not. Much to my annoyance, we didn't see any gain of HP at all.

ANMVQ · 12-09-2015, 11:31 AM

This will be very helpful for you as you mod the car. As long as you stay with this dyno. I do that always use the same dyno. The F150 was ECOBoost I'm guessing. FI is always easier to make WHP

FNR32 · 12-09-2015, 11:33 AM

The f150 was actually a 5.0. The gain he made really surprised me. I also realized that he car had 89 in it from the drive home from CT (the stations on this exit didn't even have 91 and my refuel light had been on for like 20 miles already). I didn't notice any ping, but I thinking the car may have already pulled a degree or so of timing and maybe I left some power on the table. I may go back this Sunday now that I've filled it up with some true 93 from she'll and see what she does.

Sent from my iPhone using Tapatalk

Fyalinks · 12-13-2015, 05:14 AM

Is your car an auto or manual? If it is auto then that is quite an efficient transmission.

jchammond · 12-13-2015, 06:32 AM

manual car's are about 15% & 17% for automatic's. (drivetrain loss)
I see you are pretty rich with your A/F ratio; also didn't see the RPM's.
wasn't sure if you hit the speed limiter or rpm limiter.
I'll try and find mine & post it-very similar.

jchammond · 12-13-2015, 06:43 AM

ImageUploadedByTapatalk1450006827.393450.jpg ImageUploadedByTapatalk1450006843.443923.jpg
1st run was in 4th gear & he backed out the throttle when the shift light flashed & second run in 5th (1:1 ratio) till speed limiter kicked in.

Sent from my iPhone using Tapatalk

FNR32 · 12-13-2015, 08:48 AM

My car is a Manual. I'm thinking about putting it back on the rollers today.

Sent from my iPhone using Tapatalk

jchammond · 12-13-2015, 09:29 AM

Quote:

Originally Posted by FNR32

My car is a Manual. I'm thinking about putting it back on the rollers today.

Sent from my iPhone using Tapatalk

What rear axle ratio does it have? some of the Sport & Nismo's went to a 3.92:1
instead of the 3.69:1

FNR32 · 12-13-2015, 10:18 AM

Quote:

Originally Posted by jchammond

What rear axle ratio does it have? some of the Sport & Nismo's went to a 3.92:1
instead of the 3.69:1

That's a great question. I'm not 100% sure, but I believe it's 3.69:1

jchammond · 12-13-2015, 10:42 AM

Axle code is in door jamb; my automatic has an RC33 (3.359:1) an RC36 would be the 3.69:1, 3.92 would probably be an RC39? Not sure/ haven't seen one.

Sent from my iPhone using Tapatalk

EzDz · 12-13-2015, 11:13 AM

Quote:

Originally Posted by jchammond

Axle code is in door jamb; my automatic has an RC33 (3.359:1) an RC36 would be the 3.69:1, 3.92 would probably be an RC39? Not sure/ haven't seen one.

Sent from my iPhone using Tapatalk

I just checked my 2016 nismo its RC39 ^^^

FNR32 · 12-13-2015, 11:16 AM

Mine is a RC36

Sent from my iPhone using Tapatalk

FNR32 · 12-13-2015, 11:19 AM

Quote:

Originally Posted by EzDz

I just checked my 2016 nismo its RC39 ^^^

Is your nismo an auto?

Sent from my iPhone using Tapatalk

jchammond · 12-13-2015, 12:12 PM

They Only went to the 3.92 in the manual cars/ the newer automatics got the RC36.
I got the top end machine RC33; would love to drive it with the 3.92 diff.
From what i've seen these guy's on the forum post-that the numbers actually go down at the wheels with a lower(numerically higher)gear ratio....some have the 4.08 & 4.36.

MicntaeG35 · 12-13-2015, 01:56 PM

did you use walker dyno right there by the railroad tracks?

12-07-2015, 08:06 PM	#1 (permalink)
FNR32 Base Member Join Date: May 2012 Location: Birmingham Posts: 105 Drives: 2014 370Z Rep Power: 13	2014 370Z stock baseline dyno run Car: Stock Year: 2014 Miles: 3880 Dyno: Dynojet Tuner:Trussville, AL I really had no expectations going in. I knew that I wanted to see something north of 275 and I got that. Looks like almost exactly 16% drivetrain loss with bhp being 332. Thoughts/input always welcome. I did a total of 3 pulls. The first one we lost the signal halfway though the run and I think it was maybe 240-245hp. On the 2nd run we thought we got it fixed, but didn't get a TQ reading due to there still being a signal issues, but the HP was 278whp. On the final run, we got a reading both hp and tq. I got the idea of take the filters out on this run to see if there was any increase in HP or TQ. A stock F150 that was there earlier had gained literally 16whp from cracking open the airbox, so I figured why not. Much to my annoyance, we didn't see any gain of HP at all. ANMVQ and synolimit like this.

12-09-2015, 11:31 AM	#2 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	This will be very helpful for you as you mod the car. As long as you stay with this dyno. I do that always use the same dyno. The F150 was ECOBoost I'm guessing. FI is always easier to make WHP __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

12-09-2015, 11:33 AM	#3 (permalink)
FNR32 Base Member Join Date: May 2012 Location: Birmingham Posts: 105 Drives: 2014 370Z Rep Power: 13	2014 370Z stock baseline dyno run The f150 was actually a 5.0. The gain he made really surprised me. I also realized that he car had 89 in it from the drive home from CT (the stations on this exit didn't even have 91 and my refuel light had been on for like 20 miles already). I didn't notice any ping, but I thinking the car may have already pulled a degree or so of timing and maybe I left some power on the table. I may go back this Sunday now that I've filled it up with some true 93 from she'll and see what she does. Sent from my iPhone using Tapatalk wideglideleon likes this. Last edited by FNR32; 12-10-2015 at 04:39 PM.

12-13-2015, 06:32 AM	#5 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	manual car's are about 15% & 17% for automatic's. (drivetrain loss) I see you are pretty rich with your A/F ratio; also didn't see the RPM's. wasn't sure if you hit the speed limiter or rpm limiter. I'll try and find mine & post it-very similar. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

12-13-2015, 06:43 AM	#6 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	ImageUploadedByTapatalk1450006827.393450.jpg ImageUploadedByTapatalk1450006843.443923.jpg 1st run was in 4th gear & he backed out the throttle when the shift light flashed & second run in 5th (1:1 ratio) till speed limiter kicked in. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html Last edited by jchammond; 12-13-2015 at 06:45 AM. Reason: PS; Mine had 50,000 miles on it then.

12-13-2015, 05:14 AM	#4 (permalink)
Fyalinks Base Member Join Date: Nov 2015 Location: NYC Posts: 10 Drives: 94 Toyota Supra B M5 Rep Power: 9	Is your car an auto or manual? If it is auto then that is quite an efficient transmission.

12-13-2015, 08:48 AM	#7 (permalink)
FNR32 Base Member Join Date: May 2012 Location: Birmingham Posts: 105 Drives: 2014 370Z Rep Power: 13	My car is a Manual. I'm thinking about putting it back on the rollers today. Sent from my iPhone using Tapatalk

12-13-2015, 10:42 AM	#10 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Axle code is in door jamb; my automatic has an RC33 (3.359:1) an RC36 would be the 3.69:1, 3.92 would probably be an RC39? Not sure/ haven't seen one. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

12-13-2015, 11:16 AM	#12 (permalink)
FNR32 Base Member Join Date: May 2012 Location: Birmingham Posts: 105 Drives: 2014 370Z Rep Power: 13	Mine is a RC36 Sent from my iPhone using Tapatalk jchammond likes this.

12-13-2015, 12:12 PM	#14 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	They Only went to the 3.92 in the manual cars/ the newer automatics got the RC36. I got the top end machine RC33; would love to drive it with the 3.92 diff. From what i've seen these guy's on the forum post-that the numbers actually go down at the wheels with a lower(numerically higher)gear ratio....some have the 4.08 & 4.36. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

12-13-2015, 01:56 PM	#15 (permalink)
MicntaeG35 Enthusiast Member Join Date: May 2014 Location: Trussville, AL Posts: 470 Drives: 11 370z nismo #452 Rep Power: 11	did you use walker dyno right there by the railroad tracks? __________________ A wounded man shall say to his assailant "If I live, I will kill you. If I die, you are forgiven."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2014 370Z 7AT Baseline Dyno	Hammtastic	Engine & Drivetrain	7	09-30-2014 11:48 AM
2013 370z stock dyno run baseline	Leuz	Tuning	7	05-24-2013 09:29 PM
DDMotorsports Shop 370Z Baseline Dyno - UGLY Torque Curve	M.Bonanni	Nissan 370Z General Discussions	31	01-10-2011 09:58 AM
Got a baseline dyno done on my stock 370z 6MT	gh0st3794	Engine & Drivetrain	12	03-09-2010 11:41 PM