Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Tuning (http://www.the370z.com/tuning/)
-   -   P1239 throttle position sensor (http://www.the370z.com/tuning/109214-p1239-throttle-position-sensor.html)

ThamerZ370 11-23-2015 04:04 PM

P1239 throttle position sensor
 
hi guys

my car Z370 supercharger by stillen and now i have the problem for the ( P1239 throttle position sensor )

how to solve the problem ?


Thanks

SouthArk370Z 11-23-2015 06:44 PM

IIRC, there is a "relearn" procedure that can be done. At least a few threads about it on this site or check the FSM.

chuckie311 11-24-2015 09:28 AM

https://www.youtube.com/watch?v=95WszTnphPI

jwick 11-24-2015 09:37 AM

Quote:

Originally Posted by SouthArk370Z (Post 3353699)
IIRC, there is a "relearn" procedure that can be done. At least a few threads about it on this site or check the FSM.

This. I've noticed that I have to perform the throttle relearn every time I get tuned. Something about multiple reflashes that causes it to go wacky. Relearn always fixes it.

EliteXpress 11-24-2015 11:04 AM

Quote:

Originally Posted by ThamerZ370 (Post 3353514)
hi guys

my car Z370 supercharger by stillen and now i have the problem for the ( P1239 throttle position sensor )

how to solve the problem ?


Thanks

I too have this platform and had the same code issues.

My fix was one of the MAF jumper / extension cables that came originally with the kit were bad. This would cause my Z to occasionally go into limp mode.

Replaced the jumper cable and never experienced it again. :driving:

RadioFlyer 12-19-2015 12:47 PM

OP, I occasionally have the same problem. Just started happening since the temperature has been dropping. Have you resolved it yet?

When I first installed the kit, I wrapped the TPS extension cable in ThremoTec heat repellent wrap, because it was summertime, and I didn't like the sheath that the cable was originally wrapped in. But that was in the summer when it was hot. Recently, I wrapped the whole cable (including the ThermoTec wrap) in aluminum foil for shielding against electrical interference. I haven't had a problem since, but I don't exactly have high hopes that the aluminum foil will do anything. So I expect that it will come back on again.

Searching the p1239 code, it pulls up posts where some people suggest replacing the throttle PEDAL sensor at the base of the gas pedal. But the majority of the problems seem to be people with Stillen Superchargers, which would indicate that the problem is in the TPS extension cable. I don't want to just get another Stillen cable because I bought my kit in July, so unless Stillen changed how they make them in the last few months, I'd probably just get another cable with the same vulnerabilities. But at the same time, I don't have a problem with the MAF extension cable.

Yes, I've done all of the resets including the throttle body reset. Any thoughts?


All times are GMT -5. The time now is 07:28 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2