EcuTek Releases Phase 2 RaceRom !!

Elmo370z · 05-30-2015, 01:22 PM

Any qualified tuners in the tampa area?

Jsmith7861 · 05-31-2015, 01:35 AM

After reading this thread, I am insanely excited to get home and get the Z finished up. As I said in the other thread Visconti, do you know of any tuners in the VA area through you? Or do you just make the trip? I am currently deployed, but whenever I get back I decided I will be using Ecutek instead of Uprev.

visconti · 05-31-2015, 09:21 PM

Quote:

Originally Posted by Jsmith7861

After reading this thread, I am insanely excited to get home and get the Z finished up. As I said in the other thread Visconti, do you know of any tuners in the VA area through you? Or do you just make the trip? I am currently deployed, but whenever I get back I decided I will be using Ecutek instead of Uprev.

Pureautomotive is one of our dealers - we make trips there and tune out of their shop

John

Elmo370z · 05-31-2015, 09:34 AM

I'm interested as well

Elmo370z · 06-01-2015, 11:37 PM

HOw would i go about getting Ecu Race Rom, besides having to flying you to florida and paying you on top of that?

nismonster · 06-03-2015, 09:02 AM

Hi Guys, wanted to share; I contacted EcuTek about if the phase 2 rom can adjust the SRM so that different gears (namely 4.08) can use SRM with full compatibility -- ie. no CEL after 100 mph and exact rev matching on downshifts.

According to an EcuTek rep, this is possible. He attached an image file that I'm guessing is the settings to plug into the ROM interface.

Here's the exact email he sent me:

Quote:

Originally Posted by EcuTek Rep

Upon further research and speaking to one of our development guys this has been done by one of our dealers in Japan, I have found a map in the phase 2 software that corrects the gear ratios (see attached screenshot) so to confirm, this can be done and has been done.

As excited as I am about this, I will probably wait for someone else to be the guinea pig. Let me know if anyone with SRM and 4.08 gears has used this rom to adjust these settings before.

visconti · 06-03-2015, 09:09 AM

Quote:

Originally Posted by nismonster

Hi Guys, wanted to share; I contacted EcuTek about if the phase 2 rom can adjust the SRM so that different gears (namely 4.08) can use SRM with full compatibility -- ie. no CEL after 100 mph and exact rev matching on downshifts.

According to an EcuTek rep, this is possible. He attached an image file that I'm guessing is the settings to plug into the ROM interface.

Here's the exact email he sent me:

As excited as I am about this, I will probably wait for someone else to be the guinea pig. Let me know if anyone with SRM and 4.08 gears has used this rom to adjust these settings before.

It's been in the software for over a year now

I've personally have done this on a few cars, and it 100% works.

John

gbrettin · 06-03-2015, 03:56 PM

Well, I think I know what my next purchase is...

Elmo370z · 06-03-2015, 06:15 PM

Any video proof of this working?

JARblue · 06-03-2015, 06:24 PM

Quote:

Originally Posted by Elmo370z

Any video proof of this working?

Video proof of the tune with 4.08 gears working with SRM?

I'm just playing devil's advocate here, but if you don't trust his statement that he has done it, are you really going to trust that the car in the video has 4.08 gears installed?

tommyguns · 06-03-2015, 08:37 PM

Well after a B A D experience with my preferred shop and this latest announcement by EcuTek I'm jumping ship from the shop and uprev. Heading over to M&S Performance on Long Island this Saturday, having the ART pipes installed and a Visconti tune, looking for 93 / 93 aggressive / 93 w/75 shot nitrous / valet. May do the flat foot shift and launch control, we'll see not really sure but I'm super excited. I'll be taking video's of the runs especially when we spray for the first time. I'll post up the results.

visconti · 06-03-2015, 10:19 PM

Quote:

Originally Posted by JARblue

Video proof of the tune with 4.08 gears working with SRM?

I'm just playing devil's advocate here, but if you don't trust his statement that he has done it, are you really going to trust that the car in the video has 4.08 gears installed?

Buy a tune and I'll let you make a video to post up

JARblue · 06-04-2015, 12:48 AM

Quote:

Originally Posted by visconti

Buy a tune and I'll let you make a video to post up

I don't have 4.08 gears and I already have a tune

Joe did a drive tune for me and offered me some cheap dyno time in the future (2 years ago) but TBH I haven't had good communication with him - I even left him a voicemail recently reminding him I owed him money and wanted to pay and got no response lol

Do you happen to know the master tuner in Austin? I'm not even sure of his name, but I spoke to them a few months ago before the features were fully released (you had them but not many other tuners did). I am interested in the new features for sure, but really only for multiple maps at this time. While I prefer to keep my tune local, I am considering purchasing a cable and upgraded features (and possibly a look at my current tune with some data logging). I'd be happy for you to PM me your thoughts and possibly a quote for your services

visconti · 06-04-2015, 07:51 AM

Quote:

Originally Posted by Elmo370z

I will keep you in mind sir, def has my interest.

Thanks, let me know if you have any questions

Quote:

Originally Posted by JARblue

I don't have 4.08 gears and I already have a tune

Joe did a drive tune for me and offered me some cheap dyno time in the future (2 years ago) but TBH I haven't had good communication with him - I even left him a voicemail recently reminding him I owed him money and wanted to pay and got no response lol

Do you happen to know the master tuner in Austin? I'm not even sure of his name, but I spoke to them a few months ago before the features were fully released (you had them but not many other tuners did). I am interested in the new features for sure, but really only for multiple maps at this time. While I prefer to keep my tune local, I am considering purchasing a cable and upgraded features (and possibly a look at my current tune with some data logging). I'd be happy for you to PM me your thoughts and possibly a quote for your services

No I dont know who they are.. never heard of them

I'll send you a PM

Elmo370z · 06-03-2015, 10:26 PM

I will keep you in mind sir, def has my interest.

06-03-2015, 03:56 PM	#8 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,291 Drives: Tricycle Rep Power: 589151	Well, I think I know what my next purchase is... warpeacelove likes this.

06-03-2015, 08:37 PM	#11 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	Well after a B A D experience with my preferred shop and this latest announcement by EcuTek I'm jumping ship from the shop and uprev. Heading over to M&S Performance on Long Island this Saturday, having the ART pipes installed and a Visconti tune, looking for 93 / 93 aggressive / 93 w/75 shot nitrous / valet. May do the flat foot shift and launch control, we'll see not really sure but I'm super excited. I'll be taking video's of the runs especially when we spray for the first time. I'll post up the results. __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EcuTek RaceRom Feature Request Thread !	visconti	Tuning	33	01-11-2014 06:27 PM
Visconti Tuning STG1 Flash (EcuTek RaceRom)	visconti	Tuning	58	11-22-2013 06:51 AM
EcuTek RaceRom Gear Ratio Tables - Who has changed their final drive?	visconti	Tuning	36	11-20-2013 11:26 PM
Phase one done	sonic370	Audio & Video	17	09-18-2010 04:46 PM

05-30-2015, 01:22 PM	#1 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Any qualified tuners in the tampa area?

05-31-2015, 01:35 AM	#2 (permalink)
Jsmith7861 Enthusiast Member Join Date: Nov 2013 Location: Virginia Posts: 466 Drives: 2014 370z Base Sport Rep Power: 12	After reading this thread, I am insanely excited to get home and get the Z finished up. As I said in the other thread Visconti, do you know of any tuners in the VA area through you? Or do you just make the trip? I am currently deployed, but whenever I get back I decided I will be using Ecutek instead of Uprev.

05-31-2015, 09:34 AM	#4 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I'm interested as well

06-01-2015, 11:37 PM	#5 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	HOw would i go about getting Ecu Race Rom, besides having to flying you to florida and paying you on top of that?

06-03-2015, 06:15 PM	#9 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Any video proof of this working?

06-03-2015, 10:26 PM	#15 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I will keep you in mind sir, def has my interest.