EcuTek Releases Phase 2 RaceRom !!

visconti · 05-30-2015, 01:55 AM

Quote:

Originally Posted by BGTV8

I have a load cell in the gear-lever of my sequential gear box (which will go into the Z34 at some stage) ... can I use this to trigger ignition/fuel cut so I can change up without lifting off the throttle ?? Is there any way I can feed this signal into the OEM ECU and EcuTek manage fuel/ignition cut

I was thinking I'd need Motec/Haltech for flat-shift ..........

Email me, I'm sure we can figure something out

Sent from my iPhone using Tapatalk

Elmo370z · 05-30-2015, 02:22 PM

Any qualified tuners in the tampa area?

Jsmith7861 · 05-31-2015, 02:35 AM

After reading this thread, I am insanely excited to get home and get the Z finished up. As I said in the other thread Visconti, do you know of any tuners in the VA area through you? Or do you just make the trip? I am currently deployed, but whenever I get back I decided I will be using Ecutek instead of Uprev.

Elmo370z · 05-31-2015, 10:34 AM

I'm interested as well

visconti · 05-31-2015, 10:21 PM

Quote:

Originally Posted by Jsmith7861

After reading this thread, I am insanely excited to get home and get the Z finished up. As I said in the other thread Visconti, do you know of any tuners in the VA area through you? Or do you just make the trip? I am currently deployed, but whenever I get back I decided I will be using Ecutek instead of Uprev.

Pureautomotive is one of our dealers - we make trips there and tune out of their shop

John

Japanjay · 05-31-2015, 10:56 PM

Quote:

Originally Posted by visconti

Ecutek is always accepting qualified tuners.

What I can tell you is I've been doing this type of Nissan tuning with ecutek on GTR for several years, a lot of the stuff that's in this software is due to my Involvement behind the scenes... Any skilled tuner can pick up this suite and tune your car but it's going to take a while for them to get a handle on the very advanced custom map stuff that some of us have been using on a daily basis for years.

I do make trips, need my expenses covered and some money in my pocket to make it worth it.. The more cars you have the cheaper it'll be per car.

I'm defiantly down to make a trip

John

Sent from my iPhone using Tapatalk

Shoot me a PM on cost of software per car, group of 5, max you can get done in a day, extra costs for your time. I might be able to get around 5 that would be interested in this.

Elmo370z · 06-02-2015, 12:37 AM

HOw would i go about getting Ecu Race Rom, besides having to flying you to florida and paying you on top of that?

nismonster · 06-03-2015, 10:02 AM

Hi Guys, wanted to share; I contacted EcuTek about if the phase 2 rom can adjust the SRM so that different gears (namely 4.08) can use SRM with full compatibility -- ie. no CEL after 100 mph and exact rev matching on downshifts.

According to an EcuTek rep, this is possible. He attached an image file that I'm guessing is the settings to plug into the ROM interface.

Here's the exact email he sent me:

Quote:

Originally Posted by EcuTek Rep

Upon further research and speaking to one of our development guys this has been done by one of our dealers in Japan, I have found a map in the phase 2 software that corrects the gear ratios (see attached screenshot) so to confirm, this can be done and has been done.

As excited as I am about this, I will probably wait for someone else to be the guinea pig. Let me know if anyone with SRM and 4.08 gears has used this rom to adjust these settings before.

visconti · 06-03-2015, 10:09 AM

Quote:

Originally Posted by nismonster

Hi Guys, wanted to share; I contacted EcuTek about if the phase 2 rom can adjust the SRM so that different gears (namely 4.08) can use SRM with full compatibility -- ie. no CEL after 100 mph and exact rev matching on downshifts.

According to an EcuTek rep, this is possible. He attached an image file that I'm guessing is the settings to plug into the ROM interface.

Here's the exact email he sent me:

As excited as I am about this, I will probably wait for someone else to be the guinea pig. Let me know if anyone with SRM and 4.08 gears has used this rom to adjust these settings before.

It's been in the software for over a year now

I've personally have done this on a few cars, and it 100% works.

John

gbrettin · 06-03-2015, 04:56 PM

Well, I think I know what my next purchase is...

Elmo370z · 06-03-2015, 07:15 PM

Any video proof of this working?

JARblue · 06-03-2015, 07:24 PM

Quote:

Originally Posted by Elmo370z

Any video proof of this working?

Video proof of the tune with 4.08 gears working with SRM?

I'm just playing devil's advocate here, but if you don't trust his statement that he has done it, are you really going to trust that the car in the video has 4.08 gears installed?

tommyguns · 06-03-2015, 09:37 PM

Well after a B A D experience with my preferred shop and this latest announcement by EcuTek I'm jumping ship from the shop and uprev. Heading over to M&S Performance on Long Island this Saturday, having the ART pipes installed and a Visconti tune, looking for 93 / 93 aggressive / 93 w/75 shot nitrous / valet. May do the flat foot shift and launch control, we'll see not really sure but I'm super excited. I'll be taking video's of the runs especially when we spray for the first time. I'll post up the results.

visconti · 06-03-2015, 11:19 PM

Quote:

Originally Posted by JARblue

Video proof of the tune with 4.08 gears working with SRM?

I'm just playing devil's advocate here, but if you don't trust his statement that he has done it, are you really going to trust that the car in the video has 4.08 gears installed?

Buy a tune and I'll let you make a video to post up

Elmo370z · 06-03-2015, 11:26 PM

I will keep you in mind sir, def has my interest.

06-03-2015, 04:56 PM	#40 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	Well, I think I know what my next purchase is... warpeacelove likes this.

06-03-2015, 09:37 PM	#43 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 65 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	Well after a B A D experience with my preferred shop and this latest announcement by EcuTek I'm jumping ship from the shop and uprev. Heading over to M&S Performance on Long Island this Saturday, having the ART pipes installed and a Visconti tune, looking for 93 / 93 aggressive / 93 w/75 shot nitrous / valet. May do the flat foot shift and launch control, we'll see not really sure but I'm super excited. I'll be taking video's of the runs especially when we spray for the first time. I'll post up the results. __________________ 09 Sport / MB / 6sd / Nismo"R" Intake / Eibach Pro Kit / Z1 25 row cooler / JWT LW FW / New Short Block 3/11/11 /H&R 15fr 20rr/DBA 4000/FI CB with 12"res./Morel/JL/"Division"mod/SPC/EcuTek/M370/ZEX C SHOT/ART's/NRG

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EcuTek RaceRom Feature Request Thread !	visconti	Tuning	33	01-11-2014 07:27 PM
Visconti Tuning STG1 Flash (EcuTek RaceRom)	visconti	Tuning	58	11-22-2013 07:51 AM
EcuTek RaceRom Gear Ratio Tables - Who has changed their final drive?	visconti	Tuning	36	11-21-2013 12:26 AM
Phase one done	sonic370	Audio & Video	17	09-18-2010 05:46 PM

05-30-2015, 02:22 PM	#32 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Any qualified tuners in the tampa area?

05-31-2015, 02:35 AM	#33 (permalink)
Jsmith7861 Enthusiast Member Join Date: Nov 2013 Location: Virginia Posts: 466 Drives: 2014 370z Base Sport Rep Power: 12	After reading this thread, I am insanely excited to get home and get the Z finished up. As I said in the other thread Visconti, do you know of any tuners in the VA area through you? Or do you just make the trip? I am currently deployed, but whenever I get back I decided I will be using Ecutek instead of Uprev.

05-31-2015, 10:34 AM	#34 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I'm interested as well

06-02-2015, 12:37 AM	#37 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	HOw would i go about getting Ecu Race Rom, besides having to flying you to florida and paying you on top of that?

06-03-2015, 07:15 PM	#41 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Any video proof of this working?

06-03-2015, 11:26 PM	#45 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I will keep you in mind sir, def has my interest.