How to find out if your car is tuned?

Trips · 04-10-2015, 10:24 PM

From another thread.

How does map switching work?
Using the Cruise Control Buttons...
-Hold the set/coast toggle down
-Press "Cancel" once for map 1, twice for map 2, etc...
-Then release the set/coast toggle.
-When you release the toggle, the cruise "SET" light on the dash will blink once for map 1, twice for map 2, etc...

UpRev tune... Changing maps?

jwick · 04-10-2015, 11:04 PM

Quote:

Originally Posted by Trips

From another thread.

How does map switching work?
Using the Cruise Control Buttons...
-Hold the set/coast toggle down
-Press "Cancel" once for map 1, twice for map 2, etc...
-Then release the set/coast toggle.
-When you release the toggle, the cruise "SET" light on the dash will blink once for map 1, twice for map 2, etc...

UpRev tune... Changing maps?

Does it work the same way with EcuTek or is that still just a one map system? I forget where they are with that software A) cuz I don't have it and B) because they made a bunch of promises up front and took forever to start delivering

Memphis370Z · 04-11-2015, 10:07 AM

Quote:

Originally Posted by jwick

Does it work the same way with EcuTek or is that still just a one map system? I forget where they are with that software A) cuz I don't have it and B) because they made a bunch of promises up front and took forever to start delivering

Hold cruise control cancel button down for a second and the tach needle will jump to 1000 rpm for map 1, 2000 rpm for map 2, etc., showing you the map that is currently being used. You can then use the accel/coast switch to toggle between maps. I've got four maps with EcuTek at the moment, plus valet mode.

StanceZ37 · 04-11-2015, 08:59 AM

Quote:

Originally Posted by Trips

From another thread.

How does map switching work?
Using the Cruise Control Buttons...
-Hold the set/coast toggle down
-Press "Cancel" once for map 1, twice for map 2, etc...
-Then release the set/coast toggle.
-When you release the toggle, the cruise "SET" light on the dash will blink once for map 1, twice for map 2, etc...

UpRev tune... Changing maps?

hmm thank you! ill definitely give this a try.

StanceZ37 · 04-11-2015, 10:44 AM

Quote:

Originally Posted by Trips

From another thread.

How does map switching work?
Using the Cruise Control Buttons...
-Hold the set/coast toggle down
-Press "Cancel" once for map 1, twice for map 2, etc...
-Then release the set/coast toggle.
-When you release the toggle, the cruise "SET" light on the dash will blink once for map 1, twice for map 2, etc...

UpRev tune... Changing maps?

Ok so i gave this a try and it worked. The cruise light blinked once all the way 5 so this means my car is uprev tuned??

04-10-2015, 10:24 PM	#1 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	From another thread. How does map switching work? Using the Cruise Control Buttons... -Hold the set/coast toggle down -Press "Cancel" once for map 1, twice for map 2, etc... -Then release the set/coast toggle. -When you release the toggle, the cruise "SET" light on the dash will blink once for map 1, twice for map 2, etc... UpRev tune... Changing maps? BeemaaZ and mag_black like this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
is there a way too tell if my car has been tuned?	firulice	Tuning	19	04-13-2015 11:12 PM
tuned	trichilo	Tuning	5	09-30-2011 10:28 AM
any AT7 tuned??	holmanyu	Tuning	37	09-21-2010 03:09 PM
getting tuned 7/27/10	jnaut	Tuning	27	07-31-2010 05:25 PM