01-07-2015, 12:18 AM | #2 (permalink) |
Track Member
Join Date: Mar 2013
Location: Mission Viejo, CA
Posts: 769
Drives: '12 370Z 6M Sport
Rep Power: 13 |
Only real option I know of is to put in at least a 4 point cage. No authority on cages and I am honestly not that educated on them but it is one of my next upgrades. There are post market companies that sell "harness bars" or "Harness mounts" be wary, and be careful how they are installed. Some person died when this car first came out because they attached their harness to bar right behind the driver seat(which is completely inadequate for harness mounting).
There is no OEM location appropriate for mounting a harness. There is no reason that I know of to buy a 3 point harness. Your OEM airbag and regular 3 point seat belt are fine. Either go to a full 5 point seat/harness/rollbar or just stay OEM. If you are looking for a true harness and seat solution, you live right next to the best Nissan performance shop in SoCal, contact Mike at Corner 3 Garage in Laguna Hills. Edit: 4 point harnesses are generally frowned upon. A 5 point will keep you from breaking your legs on impact, a 4 point might not. Maybe a 4 point is OK for autoX where there are not walls to run into generally and front impact is not likely. But with a 4 point your butt can still slide forward(which is attached to your legs) and if they bump into the engine block crashing through your front dash, then the engine will win.
__________________
Current Mods: Vorpal Weapon +5. Last edited by GSS138; 01-07-2015 at 12:40 AM. |
01-07-2015, 09:10 AM | #3 (permalink) | |
Enthusiast Member
Join Date: Nov 2012
Location: boston
Posts: 265
Drives: 2011 370z sport
Rep Power: 13 |
Quote:
__________________
AAM Axleback + AAM Midpipe | K&N Drop in filters | Eibach Front Sway bar |Whiteline diff bushing| Dunlop ZII |
|
01-07-2015, 09:56 AM | #4 (permalink) |
A True Z Fanatic
Join Date: Jun 2011
Location: WHAT
Posts: 2,551
Drives: 2018 Camaro SS 1LE
Rep Power: 424 |
No harness unless you have a full cage.
No insurance if you have a full cage. 2c
__________________
2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)
|
01-07-2015, 10:11 AM | #5 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29539 |
Yep. My CG-Lock works great.
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
01-07-2015, 11:10 AM | #6 (permalink) |
Track Member
Join Date: Jul 2009
Location: Dallas
Posts: 981
Drives: Touring/Sport M6 PG
Rep Power: 17 |
I've had good luck with moving my seat back, pulling the belt hard to lock it, and then moving the seat forward. I have the powered touring seats though and I suspect this wouldn't work as well with manual seats.
|
01-07-2015, 08:04 PM | #7 (permalink) |
Track Member
Join Date: Mar 2013
Location: Mission Viejo, CA
Posts: 769
Drives: '12 370Z 6M Sport
Rep Power: 13 |
DR I do the same thing, with airbag, I figure what is the point of a 3 or 4 point harness.
@OP. Some of the post market "plugNPlay" bars might suit your needs, I think it probably depends more on the install. But still I am not sure that going to a 3 point harness is worth the money, I am open to feedback from anyone, but just can't see it working any better than what DR suggested by moving your seat far back, lock the belt, then slide the seat forward. If you do that, it will be just as good as a 3 point and a bar imo. Give it a try first I would say, it might save you a couple hundred bucks! And yeah Dr, the power seats are good for that! WO them you would need to have a buddy help you push the seat forward most likely.
__________________
Current Mods: Vorpal Weapon +5. |
01-07-2015, 08:54 PM | #8 (permalink) |
Enthusiast Member
Join Date: Nov 2012
Location: boston
Posts: 265
Drives: 2011 370z sport
Rep Power: 13 |
At tip for the CG-lock is to grab some skate board tape. Put a little but on the clamps and it will make sure it dosent fall off. I found that before doing this I would knock the lock off when getting in and out of the car during autox.
__________________
AAM Axleback + AAM Midpipe | K&N Drop in filters | Eibach Front Sway bar |Whiteline diff bushing| Dunlop ZII |
01-07-2015, 08:58 PM | #9 (permalink) |
Track Member
Join Date: Jul 2009
Location: Dallas
Posts: 981
Drives: Touring/Sport M6 PG
Rep Power: 17 |
In the hatch there is a baby seat anchor bolt on the drivers side for JDM babies I personally wouldn't use one of those 3 point belts in a modern car with air bags.
|
01-08-2015, 11:23 AM | #10 (permalink) | |
Track Member
Join Date: Mar 2013
Location: Mission Viejo, CA
Posts: 769
Drives: '12 370Z 6M Sport
Rep Power: 13 |
Quote:
After talking to lots of people, after 2 month ago my father putting his GT3 into a wall at summit point, a fellow POC club member ending up hospitalized(he had 5 point and full cage) at Big Willow, and almost getting t-boned 2 weeks ago at Buttonwillow myself, I have decided that I am not even going to mess around with intermediary upgrades such as 3-4 points, bolt in roll bar etc. Granted it's expensive, but I am getting to a point skill and time wise where I need to get some real safety gear. I don't do AutoX , and I can definitely understand why the requirements there are not as stringent. It's pretty unlikely to hit a wall or another car , and I am sure that 100MPH+ is not that common. So my needs probably don't align with your needs exactly, but I don't want you to waste your money either While you are looking, check out Sabelt's products as well. nice looking stuff. Sabelt - Home
__________________
Current Mods: Vorpal Weapon +5. |
|
01-08-2015, 08:41 PM | #12 (permalink) | |
Enthusiast Member
Join Date: Nov 2012
Location: boston
Posts: 265
Drives: 2011 370z sport
Rep Power: 13 |
Quote:
It would be cool if there was a way to make the seat belt tensioner lock on demand and stay that way until you release it. That I would happily buy for 20 bucks.
__________________
AAM Axleback + AAM Midpipe | K&N Drop in filters | Eibach Front Sway bar |Whiteline diff bushing| Dunlop ZII |
|
04-15-2015, 10:32 PM | #13 (permalink) |
Base Member
Join Date: Feb 2014
Location: Huntsville, AL
Posts: 245
Drives: 2014 370Z Touring
Rep Power: 11 |
Did you get the strap? Using it? If so, like it?
__________________
Ark Performance / Eibach / Forgestar (CF10's Daily, F14's Race)/ Project Kics / K&N / Z1 / TWM Performance / RJM Performance / Koni / Hawk Performance |
04-15-2015, 10:41 PM | #14 (permalink) |
Base Member
Join Date: Aug 2014
Location: Texas
Posts: 99
Drives: 2013 Nismo 370Z
Rep Power: 11 |
I've been using the torso strap for 10 years. I keep it in my helmet bag. Best $20 you can spend.
G-FORCE Autocross Torso Harness - Free Shipping on All Orders @ JEGS |
04-15-2015, 10:53 PM | #15 (permalink) |
A True Z Fanatic
Join Date: Feb 2011
Location: Sterling, VA
Posts: 1,922
Drives: Legit Racecar 370Z
Rep Power: 142 |
Your totally safe options, in order of investment:
1. Stock 2. CG Lock 3. Seats, Harness Bar, Harnesses with ASM 4. Seats, 4+ point rollbar with a diagonal, 5/6 pt harnesses, helmet, HANS Safety is a system. And the stock seats are not designed for use with harnesses. Actual safety requirements for Autocross are generally much less. So you can get away with knockoff harnesses wrapped on the stock cross brace just to plant you in the seat. Not that I would suggest it. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seat rails that will seat around stock height or slightly lower? | Volk Z | Exterior & Interior | 15 | 05-08-2013 02:12 PM |
Harness bar and harnesses with stock seats? | Flushnismo | Exterior & Interior | 3 | 03-23-2012 03:03 AM |
nissan eliminate alarm seat belt for harness etc | martin82 | Track / Autocross / Drifting / Dragstrip | 2 | 02-28-2012 01:24 AM |
Stock stereo plug harness (non Bose) | rjgilliam | Wanted | 0 | 11-29-2009 06:18 PM |