It isnt like any other wide body kit ! Megan Ver1.0 Wide Aero Body Kit.

Megan370z · 08-08-2014, 08:34 AM

Quote:

Originally Posted by ckim64

Holy ****!! That rear diffuser is fuckin amazing!! Any plans of running possibly dual canard setup or a larger front diffuser with undertray fins?? Whole car looks killer man!!

everything you mentioned is planned plus more ...

Rusty · 08-08-2014, 09:30 PM

Good job, good job!

GSS138 · 08-08-2014, 10:00 PM

Really like it man. Some of the edges are rough and all, but you have all the right ideas. So many crappy post market kits try to "look" like what you are doing here, but this is the real stuff. Just smooth out some of those edges and I really think it is great.

Only question I can ask is if you are using flat head machine screws on parts. Can't tell from pics.

Megan370z · 08-09-2014, 04:09 AM

Quote:

Originally Posted by GSS138

Really like it man. Some of the edges are rough and all, but you have all the right ideas. So many crappy post market kits try to "look" like what you are doing here, but this is the real stuff. Just smooth out some of those edges and I really think it is great.

Only question I can ask is if you are using flat head machine screws on parts. Can't tell from pics.

I totally agree the finish is rough as everything is hand laid and to make it worst, the hybrid CF/Kevlar is a real bitch if done this way. it just cannot be sanded like CF. Those rear side panel on the quarter wasn't easy to fit correctly as it curve inward toward the rear, I had to adjust the cut line.
I did a better job on the left side since it was the second time doing it !

as well as the left quarter panel is a one piece 2 Vs the right side being a 3 pieces+ the gas cap panel.

Ver2.0 will be CF only or mix of CF/FRP but it wont be before 2016. if that happen this quick

to answer your question, the body work is held by Rivnut and half round head machine screw. the front bumper is a mix of Rivnut and rivets as well as the diffuser.

08-08-2014, 09:30 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,400 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Good job, good job! __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-08-2014, 10:00 PM	#3 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 14	Really like it man. Some of the edges are rough and all, but you have all the right ideas. So many crappy post market kits try to "look" like what you are doing here, but this is the real stuff. Just smooth out some of those edges and I really think it is great. Only question I can ask is if you are using flat head machine screws on parts. Can't tell from pics. __________________ Current Mods: Vorpal Weapon +5.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for a wide body solution	DjSquall	Exterior & Interior	48	05-11-2013 12:29 AM
Vielside Wide Body Kit	HandnPantz	Exterior & Interior	3	03-20-2012 02:24 AM
Seibon Wide Body	Jamaica	Exterior & Interior	86	11-18-2010 04:48 AM
VeilSide Wide body.	Jamaica	Exterior & Interior	24	09-15-2010 10:52 PM
So who's gonna do the first custom wide body?	BLUESLATE	Exterior & Interior	58	01-26-2010 05:34 PM