why 18'' wheels more popular on track?

Red__Zed · 11-18-2013, 08:09 PM

Quote:

Originally Posted by GSS138

Enough with the nerd talk, I think you guys need to race.

I was hoping for mud-wrestling.

If there's a race to be done I pick my home turf in eastern UT:

But, back on-topic as this is tech and not OT.

Rusty · 11-18-2013, 09:07 PM

Loin's Back. Last time I was there. It was closed.

Wanted to do it in my Power Wagon.

wstar · 11-19-2013, 09:18 AM

Quote:

Originally Posted by Red__Zed

brakes.

Getting back on topic - this really is the mitigating tradeoff. Smaller wheel diameter is generally going to be better for a number of reasons we've already beat to death, but at the end of the day you have to fit brakes. You need brakes big enough to do the job, and then the smallest wheels you can fit over those brakes. If there's a big gap between your front rotors and the inside of the front wheels, you're not being optimal

synolimit · 11-19-2013, 10:12 PM

Quote:

Originally Posted by wstar

If there's a big gap between your front rotors and the inside of the front wheels, you're not being optimal

synolimit · 01-18-2014, 06:05 PM

Tony just liked this pic, reminded me to comment. Took the wheel off the other day. A rock got caught in between the caliper and inside wheel. Cut the **** out of it all the way around the whole thing. Wheels dipped so that's an easy fix but the caliper I'm

. At least you can't see it. I'm just worried about salt in winter time eating the powder coat off entering through the cut.

SPOHN · 01-18-2014, 06:23 PM

Quote:

Originally Posted by synolimit

Tony just liked this pic, reminded me to comment. Took the wheel off the other day. A rock got caught in between the caliper and inside wheel. Cut the **** out of it all the way around the whole thing. Wheels dipped so that's an easy fix but the caliper I'm

. At least you can't see it. I'm just worried about salt in winter time eating the powder coat off entering through the cut.

That's the issue I foresaw with my RPF1's (Thanks Mike) and my AP BBK. They were not touching but a piece of pine straw would catch when I was free spinning the wheels. That's how close mine was. So I'm running a 5mm spacer. It was that or grind down the caliper a little. It puts the wheels out there but I'm ok with it. Hopefully one day I'll run wider fenders.

synolimit · 01-18-2014, 06:27 PM

Quote:

Originally Posted by SPOHN

That's the issue I foresaw with my RPF1's (Thanks Mike) and my AP BBK. They were not touching but a piece of pine straw would catch when I was free spinning the wheels. That's how close mine was. So I'm running a 5mm spacer. It was that or grind down the caliper a little. It puts the wheels out there but I'm ok with it. Hopefully one day I'll run wider fenders.

You go with 18x9.5 +15? Now you have +10?

SPOHN · 01-18-2014, 06:36 PM

Quote:

Originally Posted by synolimit

You go with 18x9.5 +15? Now you have +10?

Yes. I like it. With -3.2 camber also. Not cause of rubbing issues. It clears by miles.

synolimit · 01-18-2014, 08:08 PM

Good. I'll check pics. I want to switch to that wheel instead.

Mike · 01-19-2014, 09:05 PM

When I ran the brembo 6 pistons, I would get rocks caught between the barrel and the top of the caliper. I had about 1mm clearance after grinding a couple mm off of the ends of the calipers. I actually got black flagged a couple times because the noise could be so loud.

cossie1600 · 01-25-2014, 11:54 PM

Ok I have a problem with the 18s. Due to the little clearance and heat from brakes, all my wheel weights have fallen off. Anyone have a solution to the problem?

synolimit · 01-26-2014, 12:14 AM

Quote:

Originally Posted by cossie1600

Ok I have a problem with the 18s. Due to the little clearance and heat from brakes, all my wheel weights have fallen off. Anyone have a solution to the problem?

Race bikes we all duck taped them on. Might work. As duck tape heats up its becomes more sticky. If it doesn't work you'll be forced to use the clamp weights that will jack your wheels up.

cossie1600 · 01-26-2014, 12:35 AM

that might leave a huge mess, not sure if it will stick as my wheels are so nasty

synolimit · 01-26-2014, 12:53 AM

Quote:

Originally Posted by cossie1600

that might leave a huge mess, not sure if it will stick as my wheels are so nasty

Then clean your wheels first

. Use a 2x4" piece or however big you need to cover a few weights and see if it sticks. If the tape falls off and the weights fall off you have one choice.

DR_ · 01-26-2014, 10:27 AM

Use heat tape to keep the weights on. It is reflective on one side to reject heat. If you are really pimp use the gold tape.

11-18-2013, 09:07 PM	#32 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,185 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Loin's Back. Last time I was there. It was closed. Wanted to do it in my Power Wagon. TerribleONE and Red__Zed like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-18-2014, 06:05 PM	#35 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Tony just liked this pic, reminded me to comment. Took the wheel off the other day. A rock got caught in between the caliper and inside wheel. Cut the **** out of it all the way around the whole thing. Wheels dipped so that's an easy fix but the caliper I'm . At least you can't see it. I'm just worried about salt in winter time eating the powder coat off entering through the cut. __________________ 13 370z-

01-18-2014, 08:08 PM	#39 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Good. I'll check pics. I want to switch to that wheel instead. __________________ 13 370z-

01-19-2014, 09:05 PM	#40 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	When I ran the brembo 6 pistons, I would get rocks caught between the barrel and the top of the caliper. I had about 1mm clearance after grinding a couple mm off of the ends of the calipers. I actually got black flagged a couple times because the noise could be so loud. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any particular reason why these wheels aren't more popular with 370z guys?	Amuse370z	Wheels & Tires	13	08-12-2012 01:01 AM
The Z - Not A Popular Choice	Dizzy	Canada	37	02-14-2012 02:20 AM
Most popular spacer combo?	Shenouda	Brakes & Suspension	27	03-27-2011 08:15 AM
What's is the FI exhaust the most popular on this board?	xbigb4ller69z	Intake/Exhaust	62	04-25-2010 01:22 PM
370Z, very popular among all lifestyles	edeeZee	Nissan 370Z General Discussions	17	07-21-2009 10:33 PM

01-25-2014, 11:54 PM	#41 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	Ok I have a problem with the 18s. Due to the little clearance and heat from brakes, all my wheel weights have fallen off. Anyone have a solution to the problem?

01-26-2014, 12:35 AM	#43 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	that might leave a huge mess, not sure if it will stick as my wheels are so nasty

01-26-2014, 10:27 AM	#45 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 17	Use heat tape to keep the weights on. It is reflective on one side to reject heat. If you are really pimp use the gold tape.