DRAG WHEEL/Tire setups

solidus · 12-11-2019, 08:28 PM

Quote:

Originally Posted by hustleman222

What's your current setup, wheels and forced induction setup and hp?

15 nismo, HKS Hipermax SP coils, Z1 Diff Bushings, Subframe bushings, Wavetrac. Rays 19" 57CRs, 285f ,305 R888R.
Boosted Performance single with 6870. S1SE fuel system, 1300 ID Injectors, 340 in tank twin 450s in Radium Surge.
IPP Stage two 10:1 compression, JWT S2 cams, Zspeed 6 puck stage 4. Flex tuned by Seb.
WHP is questionable now since the last dyno was done with a boost leak and a crack in the manifold flex bellow. Made 710rwhp and 623ftlbs @ 18psi. Current High boost map is 21psi with a 23psi boost cut. I have not a single doubt the car has 10 seconds in it.

hustleman222 · 12-11-2019, 09:45 PM

Naah, I think you're good,

Spooler · 12-11-2019, 10:46 PM

Quote:

Originally Posted by solidus

Man I just watched Adam LZ blow another motor.. That's not what got me. He did a 1.58 60ft on 18" radials. Prior to that he hit 11.7 at 126 rolling out of the box.
I'm off the fence. Earlier I ordered a set of 17" Welds. I'm definitely running a 10 second 1/4 in 2020. I dont care if it's a 10.9 I'm running 10s.
Wheels ship in January so I'll most likely hit it in February and hopefully make another run at the half mile with traction control off this time.

My wheel money went to a new washer and dryer. Who is Adam LZ???? Another one of your fruity Floridian's?

cossie1600 · 12-24-2019, 12:12 AM

If anyone is in need for a set of 18" racing wheels, let me know. I have 2 sets available!

SG4247 · 12-24-2019, 03:27 AM

Brand, width and offset would be helpful!

cossie1600 · 12-24-2019, 01:49 PM

TSW Nurburgring 18x9.5 and 18x10.5. How does $600 sound for the whole set with some old slicks on it, come pick it up.

BOLIO 671 · 06-07-2020, 08:19 AM

Quote:

Originally Posted by sirnixalot

Thanks for the updated information. I'll give the 28x10.5 bias ply 17's a shot first with the raised height and alignment.

Wonder if a dynalite caliper can be packaged over the 11.5" rotor to fit a 15" wheel......

It’s been awhile since I’ve been in this thread. I currently have 305/35/18 Hoosier drag radials on 18X10.5 TSWs.... best 60ft I’ve ever got on these was a 1.7.... I was speaking with a local GTR owner who was able to pull off running 28” M&H slicks on Enkei PF01s.... was wondering if these will fit on the Zs rear with the OEM Sports/Nismo brake setup.

Awhile back people were saying the smallest u could go with the oem akebono brakes were 18” for clearance ..:but I’ve recently heard and read of 17’s fitting wondering with the 28 x 10.5 bias ply setup like sirnixalot posted. Can any of u gentlemen confirm????

Attached is the pic of the GTR on the Enkei PF01s tuning the M&H 28” slicks

solidus · 06-07-2020, 09:55 AM

Quote:

Originally Posted by BOLIO 671

It’s been awhile since I’ve been in this thread. I currently have 305/35/18 Hoosier drag radials on 18X10.5 TSWs.... best 60ft I’ve ever got on these was a 1.7.... I was speaking with a local GTR owner who was able to pull off running 28” M&H slicks on Enkei PF01s.... was wondering if these will fit on the Zs rear with the OEM Sports/Nismo brake setup.

Awhile back people were saying the smallest u could go with the oem akebono brakes were 18” for clearance ..:but I’ve recently heard and read of 17’s fitting wondering with the 28 x 10.5 bias ply setup like sirnixalot posted. Can any of u gentlemen confirm????

Attached is the pic of the GTR on the Enkei PF01s tuning the M&H 28” slicks

The 305/45 17 is basically a 28 seeing as it's 27.8. That's the size ET street R I have to run with Weld 17x10.5s with a 6.5 offset. I haven't mounted the tires yet but the wheels fit and clear the calipers. So a 28" bias ply should be on point.

BOLIO 671 · 06-07-2020, 10:39 PM

Quote:

Originally Posted by solidus

The 305/45 17 is basically a 28 seeing as it's 27.8. That's the size ET street R I have to run with Weld 17x10.5s with a 6.5 offset. I haven't mounted the tires yet but the wheels fit and clear the calipers. So a 28" bias ply should be on point.

Are you on stock height/suspension? Pls post up pics if possible when you get the tires mounted and fitted....BTW...where did you order/purchase your Weld Rim from???

solidus · 06-08-2020, 04:23 PM

I'm on HKS coils and will likely raise the car to stock height for my quarter mile attempts. I also got my wheels from Jegs. Pro tip: Be prepared to wait. I waited 3+ months for mine.

Also I'm not focused on a super setup I'm just looking for a 10.xx run. If I went out and ran a 10.8 on my first run I'm done. My next focus will be sorting the suspension for occasional track days and slapping on the Welds from time to time for roll races and 1/2 mile events.

12-11-2019, 09:45 PM	#92 (permalink)
hustleman222 Enthusiast Member Join Date: Sep 2014 Location: Louisiana Age: 40 Posts: 250 Drives: 15 Nissan 370Z Nismo Rep Power: 3366	Naah, I think you're good, __________________ 316whp/262tq 12.38 @ 110mph on 3.91 gears 336whp/273tq Didn't push it hard enough. Turbo Time

12-24-2019, 03:27 AM	#95 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	Brand, width and offset would be helpful! Hotrodz likes this.

06-08-2020, 04:23 PM	#100 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	I'm on HKS coils and will likely raise the car to stock height for my quarter mile attempts. I also got my wheels from Jegs. Pro tip: Be prepared to wait. I waited 3+ months for mine. Also I'm not focused on a super setup I'm just looking for a 10.xx run. If I went out and ran a 10.8 on my first run I'm done. My next focus will be sorting the suspension for occasional track days and slapping on the Welds from time to time for roll races and 1/2 mile events. BOLIO 671 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is your drag wheel set up?	V8Killer	Wheels & Tires	25	11-04-2013 09:05 AM
Need some recommended exhaust setups :D?	conor1123	Intake/Exhaust	15	01-20-2012 03:15 PM
Tire Setups for DD!	CrownR426	Wheels & Tires	4	06-27-2011 02:39 PM
Let's see your home theater setups!	johnnydrama	The Lounge (Off Topic)	7	01-10-2011 12:41 AM
Winter Tire Setup - Drag DR31 Gunmetal 18s w/ Hankook i-Pikes	mr_sparkle	Wheels & Tires	27	12-07-2010 05:03 PM

12-24-2019, 12:12 AM	#94 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	If anyone is in need for a set of 18" racing wheels, let me know. I have 2 sets available!

12-24-2019, 01:49 PM	#96 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	TSW Nurburgring 18x9.5 and 18x10.5. How does $600 sound for the whole set with some old slicks on it, come pick it up.