DRAG WHEEL/Tire setups

solidus · 12-11-2019, 04:20 PM

Man I just watched Adam LZ blow another motor.. That's not what got me. He did a 1.58 60ft on 18" radials. Prior to that he hit 11.7 at 126 rolling out of the box.
I'm off the fence. Earlier I ordered a set of 17" Welds. I'm definitely running a 10 second 1/4 in 2020. I dont care if it's a 10.9 I'm running 10s.
Wheels ship in January so I'll most likely hit it in February and hopefully make another run at the half mile with traction control off this time.

hustleman222 · 12-11-2019, 06:38 PM

Quote:

Originally Posted by solidus

Man I just watched Adam LZ blow another motor.. That's not what got me. He did a 1.58 60ft on 18" radials. Prior to that he hit 11.7 at 126 rolling out of the box.
I'm off the fence. Earlier I ordered a set of 17" Welds. I'm definitely running a 10 second 1/4 in 2020. I dont care if it's a 10.9 I'm running 10s.
Wheels ship in January so I'll most likely hit it in February and hopefully make another run at the half mile with traction control off this time.

What's your current setup, wheels and forced induction setup and hp?

solidus · 12-11-2019, 07:28 PM

Quote:

Originally Posted by hustleman222

What's your current setup, wheels and forced induction setup and hp?

15 nismo, HKS Hipermax SP coils, Z1 Diff Bushings, Subframe bushings, Wavetrac. Rays 19" 57CRs, 285f ,305 R888R.
Boosted Performance single with 6870. S1SE fuel system, 1300 ID Injectors, 340 in tank twin 450s in Radium Surge.
IPP Stage two 10:1 compression, JWT S2 cams, Zspeed 6 puck stage 4. Flex tuned by Seb.
WHP is questionable now since the last dyno was done with a boost leak and a crack in the manifold flex bellow. Made 710rwhp and 623ftlbs @ 18psi. Current High boost map is 21psi with a 23psi boost cut. I have not a single doubt the car has 10 seconds in it.

Spooler · 12-11-2019, 09:46 PM

Quote:

Originally Posted by solidus

Man I just watched Adam LZ blow another motor.. That's not what got me. He did a 1.58 60ft on 18" radials. Prior to that he hit 11.7 at 126 rolling out of the box.
I'm off the fence. Earlier I ordered a set of 17" Welds. I'm definitely running a 10 second 1/4 in 2020. I dont care if it's a 10.9 I'm running 10s.
Wheels ship in January so I'll most likely hit it in February and hopefully make another run at the half mile with traction control off this time.

My wheel money went to a new washer and dryer. Who is Adam LZ???? Another one of your fruity Floridian's?

12-11-2019, 04:20 PM	#1 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	Man I just watched Adam LZ blow another motor.. That's not what got me. He did a 1.58 60ft on 18" radials. Prior to that he hit 11.7 at 126 rolling out of the box. I'm off the fence. Earlier I ordered a set of 17" Welds. I'm definitely running a 10 second 1/4 in 2020. I dont care if it's a 10.9 I'm running 10s. Wheels ship in January so I'll most likely hit it in February and hopefully make another run at the half mile with traction control off this time. Rusty, Spooler, hustleman222 and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is your drag wheel set up?	V8Killer	Wheels & Tires	25	11-04-2013 08:05 AM
Need some recommended exhaust setups :D?	conor1123	Intake/Exhaust	15	01-20-2012 02:15 PM
Tire Setups for DD!	CrownR426	Wheels & Tires	4	06-27-2011 01:39 PM
Let's see your home theater setups!	johnnydrama	The Lounge (Off Topic)	7	01-09-2011 11:41 PM
Winter Tire Setup - Drag DR31 Gunmetal 18s w/ Hankook i-Pikes	mr_sparkle	Wheels & Tires	27	12-07-2010 04:03 PM