Opinions on Alginment specs

martin82 · 10-30-2013, 06:07 PM

LOL^, once I get car done then it will go for new alignment ASAP!

phunk · 10-30-2013, 06:12 PM

Quote:

Originally Posted by clintfocus

If the rear suspension can be setup correctly with a very mild amount of static negative camber, then they get off corners well while still being at a ideal contact patch midncorner. Hence why I recommend nothing over -2 in back and thats on the upper end. -1.5 to -1.75 really helps the car to come off slow corners well and still not roll onto its outside edge in sweepers

I have been playing with the rear suspension in CAD... Once my Z is down for the winter, I have intentions of playing with some brackets to change my rear control arm angles to reduce compression camber. I wasnt sure if it would be of any benefit to the track racers or just drag racing / street guys. Once I have it on jackstands for the season, I can take the rear springs out and play with different pivot locations and watch the compression specs

SPOHN · 10-30-2013, 06:28 PM

I like -3.0 F and -1.8 R, 0 toe all around.

clintfocus · 10-30-2013, 07:04 PM

Quote:

Originally Posted by martin82

LOL^, once I get car done then it will go for new alignment ASAP!

And let me use a damn pyrometer on your car!!! Lmao

Quote:

Originally Posted by phunk

I have been playing with the rear suspension in CAD... Once my Z is down for the winter, I have intentions of playing with some brackets to change my rear control arm angles to reduce compression camber. I wasnt sure if it would be of any benefit to the track racers or just drag racing / street guys. Once I have it on jackstands for the season, I can take the rear springs out and play with different pivot locations and watch the compression specs

I see what you're getting at here, only way to know is on track testing with a pyrometer. How much of a curved reduction do u have in mind?

Quote:

Originally Posted by SPOHN

I like -3.0 F and -1.8 R, 0 toe all around.

This is what I run on my 370

synolimit · 10-30-2013, 11:21 PM

Quote:

Originally Posted by Rusty

Nice idea, but the problem with that is. When you change camber settings. Toe also changes. You are moving the arms in for more neg. camber, which means you get more toe in. So you would also have to change the toe.

O I know. Have to write down everything and get a nice plan together what to attack first and how, then move to toe so you have a nice sequence of events to get to your track numbers. You could also spend $200 on this I just saw someone post.

Quicktrick Alignment | DIY Alignment, wheel alignment, toe align

There'd be no guessing. Just attach to wheel and done.

Rusty · 10-31-2013, 04:07 PM

Ok, got the Nismo aligned today. The front for both sides is camber -2, caster is 6, toe is zero. The rear both sides. Camber -1.7, toe is zero. It's raining now. So I can't really try it out. After today. I can't do anything for 4 to 6 weeks. Having surgery on my foot tomorrow.

Thanks' for all of the input guys.

synolimit · 10-31-2013, 05:56 PM

Quote:

Originally Posted by Rusty

Ok, got the Nismo aligned today. The front for both sides is camber -2, caster is 6, toe is zero. The rear both sides. Camber -1.7, toe is zero. It's raining now. So I can't really try it out. After today. I can't do anything for 4 to 6 weeks. Having surgery on my foot tomorrow.

Thanks' for all of the input guys.

Good luck. Hope it isn't bad. Foot surgeries are the worst to recover from.

redline10000 · 10-31-2013, 10:08 PM

Quote:

Originally Posted by Rusty

Ok, I got all of my SPL parts installed. Now for an alignment tomorrow. The Nismo is used for both track and street. So I have to come up with something to fit both. Thinking of camber set at 1.5 deg neg. caster set at 6 deg neg. and toe would be at min in spec.
Opinions please.

Just wondering, how did you come up with a caster of 6? Is that the best for our cars ? I'm taking notes for autox next year.

Rusty · 10-31-2013, 10:21 PM

Quote:

Originally Posted by redline10000

Just wondering, how did you come up with a caster of 6? Is that the best for our cars ? I'm taking notes for autox next year.

From something I read. To help with turn in, and camber when turned.

cv129 · 11-01-2013, 09:36 PM

^wait, on the caster, u meant positive 6 or negative 6? I thought positive caster helps create negative camber when front wheels are turned?

Edit: Just reread, disregard my original post.

Now next question...from the link below, it shows OEM nismo has +8 degree caster? Or is that not 8 "degrees" but some other unit of measurement?

OEM Nismo Alignment settings?

Rusty · 11-01-2013, 10:38 PM

Quote:

Originally Posted by cv129

^wait, on the caster, u meant positive 6 or negative 6? I thought positive caster helps create negative camber when front wheels are turned?

Edit: Just reread, disregard my original post.

Now next question...from the link below, it shows OEM nismo has +8 degree caster? Or is that not 8 "degrees" but some other unit of measurement?

OEM Nismo Alignment settings?

In that link. The chart shows that the stock setting is about +5deg. So I'm trying +6 for now.

cv129 · 11-01-2013, 10:57 PM

Quote:

Originally Posted by Rusty

In that link. The chart shows that the stock setting is about +5deg. So I'm trying +6 for now.

I was referring to the post by Fontana Nissan, caster 8.17. But remembering what Nismo09 said on caster adjustability with the SPL arms maxing at about +7.xx, I guess +8 stock is not possible. Thx and good luck with the surgery.

Rusty · 11-02-2013, 01:59 PM

Quote:

Originally Posted by cv129

I was referring to the post by Fontana Nissan, caster 8.17. But remembering what Nismo09 said on caster adjustability with the SPL arms maxing at about +7.xx, I guess +8 stock is not possible. Thx and good luck with the surgery.

I don't know where they got the 8deg caster from.

The surgery is done. So now I get to kick back and watch BBC Top Gear, and all of the racing I can get.

redline10000 · 11-03-2013, 10:33 AM

Quote:

Originally Posted by Rusty

From something I read. To help with turn in, and camber when turned.

Thanks.

RCL · 11-03-2013, 07:32 PM

Rear camber around -1, fronts around -2 should be great for both. That's what I ran on my car.

10-30-2013, 06:28 PM	#18 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I like -3.0 F and -1.8 R, 0 toe all around. __________________

10-31-2013, 04:07 PM	#21 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,191 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Ok, got the Nismo aligned today. The front for both sides is camber -2, caster is 6, toe is zero. The rear both sides. Camber -1.7, toe is zero. It's raining now. So I can't really try it out. After today. I can't do anything for 4 to 6 weeks. Having surgery on my foot tomorrow. Thanks' for all of the input guys. phunk and clintfocus like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-01-2013, 09:36 PM	#25 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,223 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	^wait, on the caster, u meant positive 6 or negative 6? I thought positive caster helps create negative camber when front wheels are turned? Edit: Just reread, disregard my original post. Now next question...from the link below, it shows OEM nismo has +8 degree caster? Or is that not 8 "degrees" but some other unit of measurement? OEM Nismo Alignment settings? Last edited by cv129; 11-01-2013 at 09:40 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torque Specs	zero610	Nissan 370Z General Discussions	30	07-09-2016 03:54 PM
2013 specs	Rhino111	Nissan 370Z Owners Manual / Service Manuals	3	05-11-2013 02:54 AM
What might be the specs to this car	Good_Tymes	Exterior & Interior	6	04-04-2013 08:15 PM
My Alignment specs - Please Help	FlawlessZ	Brakes & Suspension	39	01-04-2013 11:35 AM
Specs of the 3.7L VQ37VHR	admin	Engine & Drivetrain	17	11-12-2012 05:18 PM

10-30-2013, 06:07 PM	#16 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	LOL^, once I get car done then it will go for new alignment ASAP!

11-03-2013, 07:32 PM	#30 (permalink)
RCL Base Member Join Date: Feb 2013 Location: atlanta, ga Posts: 51 Drives: 06 infiniti g35 Rep Power: 12	Rear camber around -1, fronts around -2 should be great for both. That's what I ran on my car.