finally decided on 18s for the track

Mike

Found a sweet deal on a set of 4 18x8.5" Rays Track 350Z wheels. Going to send them to weldcraft and have them widened to 9" front and 10" rear and be done with it! Would go a little wider, but since they add to the back side, the above sizes seem to be optimal, plus they will be wide enough.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

Caravanshaka

how are the offsets on those? I'm assuming they are the 6-spoke with the dimples in each spoke?

__________________
____________________ PROJECT DiaD - Sold but not forgotten!
The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

Mike

Yes, they are the 6 spoke Rays with dimples. I'm getting a set of 4 rear wheels, all 8.5 +33, when I get them modified, they will all be 9.5 +46. The fronts will have 5mm less inner clearance and stick out 8mm farther than stock, and the rears will need my 20mm spacer, and with the spacer have 2mm less inner clearance and stick out 2mm less, if that makes sense.

I plan on running 275s all the way around to dial out some understeer. It was a great setup on my 350Z.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968