CJM Fuel Starvation Control Product, Round 2

phunk · 11-10-2013, 11:36 AM

We did not finish this Saturday... The lower can sections are halfway done. We ran into a problem. However... Hoping to get them finished tomorrow. Then we can still get the pump clamps finished this week and start getting everything ready for anodizing.

cdoxp800 · 11-10-2013, 11:42 AM

Is Round Two still open for buyers?

phunk · 11-11-2013, 12:45 AM

Technically it is closed. But I can go through it all and see if there is room for one more of them to be sold.

I'm beginning to wish that we had just made like 40 this time. I have a feeling that I won't be able to go an entire year before the next batch again. Might have to do them again come summer.

Rusty · 11-11-2013, 12:59 AM

I think so too. When this batch gets installed, and on the track. The reviews coming back from that. You're going to be doing another batch. LOL

martin82 · 11-11-2013, 01:44 AM

Plus remember a few Midwest and east coast people track time is almost over!! After winter more orders!!!

Rusty · 11-11-2013, 01:48 AM

Quote:

Originally Posted by martin82

Plus remember a few Midwest and east coast people track time is almost over!! After winter more orders!!!

It is over.

BGTV8 · 11-11-2013, 02:29 AM

Dude, we are just heading into summer ................ y'all need to come down-under !!!

martin82 · 11-11-2013, 03:07 AM

Sad luckily for me I'm in west coast! Lol sorry

Rusty · 11-11-2013, 01:04 PM

Quote:

Originally Posted by BGTV8

Dude, we are just heading into summer ................ y'all need to come down-under !!!

Quote:

Originally Posted by martin82

Sad luckily for me I'm in west coast! Lol sorry

Well, I can't drive until the doctor says I can put weight on my foot.
So it's a mood point right now.

Mike · 11-11-2013, 08:22 PM

Quote:

Originally Posted by Rusty

It is over.

I've got an event December 7/8 at Road Atlanta

Rusty · 11-11-2013, 08:53 PM

Quote:

Originally Posted by Mike

I've got an event December 7/8 at Road Atlanta

Lucky you.

I'll be coming off of sick leave and going vacation on the 7th. Taking an 8 day Caribbean cruise.

Mike · 11-11-2013, 09:05 PM

Quote:

Originally Posted by Rusty

Lucky you.

I'll be coming off of sick leave and going vacation on the 7th. Taking an 8 day Caribbean cruise.

I think I would rather do that than go to the track! Good luck with your foot.

GSS138 · 11-11-2013, 10:45 PM

You guys should just all come to CA for Xmas/new years and go to AAA/Big Willow/Button Willow with martin and I

It's kinda dickish to say, but this is the best time of year out here, low humidity, 70-80 degrees, and track gets perfect temp right around noon-1. Gotta watch that "cold" first session though when it is still like 55-60 degrees out-tires are slippery

phunk · 11-16-2013, 08:51 PM

The very last part is setup in the CNC right now. Since this part is used for other product as well, we are making a very large batch of them. They will be done Monday or Tuesday. So at some point next week, the RRPs will be with the anodizer. Once they come back from there... That's it.

SS_Firehawk · 11-16-2013, 09:35 PM

Nice... Now I need to start gathering the funds to get this home. Wife told me this is my Christmas gift, seems like most of my gifts recently have been paid for out of my pocket lol.

11-10-2013, 11:36 AM	#181 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	We did not finish this Saturday... The lower can sections are halfway done. We ran into a problem. However... Hoping to get them finished tomorrow. Then we can still get the pump clamps finished this week and start getting everything ready for anodizing. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

11-10-2013, 11:42 AM	#182 (permalink)
cdoxp800 A True Z Fanatic Join Date: May 2009 Location: FL Posts: 1,337 Drives: 2011 Nismo Rep Power: 19	Is Round Two still open for buyers? __________________ 2011 Brilliant Silver NISMO 370z. #: 0046. PPE LTH \| MillSpec Cats \| F.I Exhaust \| Akuma Intakes \| Rotora 6/4 Brakes

11-11-2013, 12:45 AM	#183 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Technically it is closed. But I can go through it all and see if there is room for one more of them to be sold. I'm beginning to wish that we had just made like 40 this time. I have a feeling that I won't be able to go an entire year before the next batch again. Might have to do them again come summer. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

11-11-2013, 12:59 AM	#184 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,172 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I think so too. When this batch gets installed, and on the track. The reviews coming back from that. You're going to be doing another batch. LOL __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-11-2013, 10:45 PM	#193 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 13	You guys should just all come to CA for Xmas/new years and go to AAA/Big Willow/Button Willow with martin and I It's kinda dickish to say, but this is the best time of year out here, low humidity, 70-80 degrees, and track gets perfect temp right around noon-1. Gotta watch that "cold" first session though when it is still like 55-60 degrees out-tires are slippery __________________ Current Mods: Vorpal Weapon +5.

11-11-2013, 01:44 AM	#185 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Plus remember a few Midwest and east coast people track time is almost over!! After winter more orders!!!

11-11-2013, 02:29 AM	#187 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,514 Drives: 09 Nissan 370Z M6 Rep Power: 39973	Dude, we are just heading into summer ................ y'all need to come down-under !!!

11-11-2013, 03:07 AM	#188 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Sad luckily for me I'm in west coast! Lol sorry

11-16-2013, 08:51 PM	#194 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	The very last part is setup in the CNC right now. Since this part is used for other product as well, we are making a very large batch of them. They will be done Monday or Tuesday. So at some point next week, the RRPs will be with the anodizer. Once they come back from there... That's it. M.Bonanni and clintfocus like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

11-16-2013, 09:35 PM	#195 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Nice... Now I need to start gathering the funds to get this home. Wife told me this is my Christmas gift, seems like most of my gifts recently have been paid for out of my pocket lol. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hit fuel starvation tonight	NitrousZ34	Engine & Drivetrain	28	04-07-2017 08:25 PM
Fuel starvation, who else?	Mike	Track / Autocross / Drifting / Dragstrip	556	12-14-2016 04:44 PM
Fuel Starvation Control Product	phunk	Track / Autocross / Drifting / Dragstrip	549	10-10-2013 04:25 AM
Fuel Starvation poll	Felix 808	Nissan 370Z General Discussions	32	07-25-2013 02:02 AM