Official 370Z 1/4 mile Times thread (Stock, TT, Nitrous, Supercharger, Bolt ons etc)

98intrigue · 04-15-2011, 03:01 PM

Quote:

Originally Posted by chuckd05

Ryan do you have the md manifold?

Yeah...think I should swap the OEM one back on??? I should have tested that last night. I totally didn't think about that! I'm not sure Whig one to use for boost either?

5700lucas · 04-15-2011, 03:31 PM

SOAKA1

how is your 1/8 mile time 7.4**** ???? Thanks

chuckd05 · 04-15-2011, 07:14 PM

Quote:

Originally Posted by 98intrigue

Yeah...think I should swap the OEM one back on??? I should have tested that last night. I totally didn't think about that! I'm not sure Whig one to use for boost either?

I do yes, some will say no but I havent seen a single thing to prove to me that the md manifold is superior in any way

tranceformer · 04-15-2011, 08:39 PM

Tough luck on the low 13's, Ryan & Tyler. Just do what I did, keep on going back until you're satisfied with your times.

Are either of you powershifting?

Ryan, you should take off that MD plenum... and sell it to me for a discount.

jnaut · 04-15-2011, 09:23 PM

Ryan Ryan, get over here. We need to work on your shifting

If you look down at the pedals , you will see a skinny one on the right. Dont let off of it ...just shift 12.XXX is in your near future!!

But seriously, do you adjust your tire pressure?pull the brake fuse ?

Actually in a few weeks i will be done with a tt install on a customers car, he has asked me to take it to the track and see what i can do with it. Maybe you could plan a crossing of the state, i could get another hand full of z"s to come out also. To make it a good night.

98intrigue · 04-15-2011, 09:51 PM

Quote:

Originally Posted by jnaut

Ryan Ryan, get over here. We need to work on your shifting

If you look down at the pedals , you will see a skinny one on the right. Dont let off of it ...just shift 12.XXX is in your near future!!

But seriously, do you adjust your tire pressure?pull the brake fuse ?

Actually in a few weeks i will be done with a tt install on a customers car, he has asked me to take it to the track and see what i can do with it. Maybe you could plan a crossing of the state, i could get another hand full of z"s to come out also. To make it a good night.

Tire pressure was at 20psi. I didn't pull the brake fuse, as I wanted to save as much tread as possible for boost. So I didnt do a big burnout. I didn't powers off either...I have and didn't notice a difference. I shift pretty quick. With only 343whp in my G35, I managed a 12.2.

I need to talk to you about my tune. Maybe we can work something out to where I can come down, have it tuned, and go to the track

jnaut · 04-15-2011, 10:01 PM

Quote:

Originally Posted by 98intrigue

Tire pressure was at 20psi. I didn't pull the brake fuse, as I wanted to save as much tread as possible for boost. So I didnt do a big burnout. I didn't powers off either...I have and didn't notice a difference. I shift pretty quick. With only 343whp in my G35, I managed a 12.2.

I need to talk to you about my tune. Maybe we can work something out to where I can come down, have it tuned, and go to the track

ryan , give me a call and ill get it set up to get your car on the rollers then off to the track. As for your g35 running 12.2 yes because it actually makes tq as our cars dont.

jnaut · 04-15-2011, 10:12 PM

Quote:

Originally Posted by Z eliminator

If i only lived closer to you guys.
we would have a great time at the track
The "z ' car is getting more work done on and will not be on the track for 3 weeks.
"big times are coming soon:
But i will never catch Jnaut. he is the king of the 1/4 mile.
Z

HAHA thanks Steve

98intrigue · 04-16-2011, 09:19 PM

Quote:

Originally Posted by jnaut

ryan , give me a call and ill get it set up to get your car on the rollers then off to the track. As for your g35 running 12.2 yes because it actually makes tq as our cars dont.

On 8lbs, I dynoed last January in 32 degrees and the car only made 343whp/349wtq. I hope my Z makes more torque than that with the turbo!

But I'll give you a ring when I get a better idea of when the car will be finished. My options are Z Fever in Tampa, S&R Performance in Tampa who tuned my car already NA, or HP Logic. I'm pretty set on HP Logic, as I know they've tuned a few FI 370s so far.

tranceformer · 04-16-2011, 10:07 PM

Quote:

Originally Posted by 98intrigue

On 8lbs, I dynoed last January in 32 degrees and the car only made 343whp/349wtq. I hope my Z makes more torque than that with the turbo!

But I'll give you a ring when I get a better idea of when the car will be finished. My options are Z Fever in Tampa, S&R Performance in Tampa who tuned my car already NA, or HP Logic. I'm pretty set on HP Logic, as I know they've tuned a few FI 370s so far.

Test & Tune nights at PBIR are usually Wednesday, Friday, and Saturday.

98intrigue · 04-16-2011, 10:15 PM

Quote:

Originally Posted by tranceformer

Test & Tune nights at PBIR are usually Wednesday, Friday, and Saturday.

It will have to be a Saturday. Tune Friday night or Saturday morning...then test and tune.

jnaut · 04-16-2011, 10:24 PM

Quote:

Originally Posted by 98intrigue

On 8lbs, I dynoed last January in 32 degrees and the car only made 343whp/349wtq. I hope my Z makes more torque than that with the turbo!

But I'll give you a ring when I get a better idea of when the car will be finished. My options are Z Fever in Tampa, S&R Performance in Tampa who tuned my car already NA, or HP Logic. I'm pretty set on HP Logic, as I know they've tuned a few FI 370s so far.

Yes ryan, hplogic tunes all of my customers cars . I have had zero issues, I do recommend them.

03WhiteGT · 05-27-2011, 01:03 PM

Hello all!! New to the forums. Took my 2011 Base m6 Z to Texas Motorplex last night. Couldn't hook for crap in 1st or on the 1-2 shift. There was zero track prep and no slick car to lay down fresh rubber. All in all, she did better than I expected. This is Bone Stock, no mods with only 800 miles. Car # 050 is me.

What can i do to limit the damn wheel hop??? Its horrible...

1
60 - 2.119
330 - 5.842
1/8 - 8.844
mph - 82.61
1000 - 11.407
1/4 - 13.574
mph - 104.54

2
60- 2.288
330 - 5.975
1/8 - 8.957
mph - 83.11
1000 - 11.508
1/4 - 13.666
mph - 105.11

jay4500 · 05-27-2011, 02:05 PM

have you try one race with the vdc on ,and what rpm did you take off at.

tranceformer · 05-27-2011, 02:39 PM

Nice runs! I'm glad more racers are posting!

I will add your time to the unofficial ranking later today.

Here is a link...
http://www.the370z.com/track-autocro...ack-times.html

04-15-2011, 08:39 PM	#424 (permalink)
tranceformer A True Z Fanatic Join Date: Nov 2008 Location: Palm Beach, FL Posts: 1,213 Drives: 2009 370Z PW 6MT Rep Power: 268	Tough luck on the low 13's, Ryan & Tyler. Just do what I did, keep on going back until you're satisfied with your times. Are either of you powershifting? Ryan, you should take off that MD plenum... and sell it to me for a discount. __________________ Ray 2009 370Z Base Sport 6MT / 12.860 @ 109.09mph / 1.921 60ft / street tires official 1/4 mile track times

04-15-2011, 09:23 PM	#425 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 18	Ryan Ryan, get over here. We need to work on your shifting If you look down at the pedals , you will see a skinny one on the right. Dont let off of it ...just shift 12.XXX is in your near future!! But seriously, do you adjust your tire pressure?pull the brake fuse ? Actually in a few weeks i will be done with a tt install on a customers car, he has asked me to take it to the track and see what i can do with it. Maybe you could plan a crossing of the state, i could get another hand full of z"s to come out also. To make it a good night. __________________ Best 1/4 mile 12.24 Best mph 114.5_______

05-27-2011, 02:05 PM	#434 (permalink)
jay4500 Base Member Join Date: Apr 2011 Location: HOUSTON Posts: 47 Drives: 2011 nissan 370z sp Rep Power: 14	jay have you try one race with the vdc on ,and what rpm did you take off at.

05-27-2011, 02:39 PM	#435 (permalink)
tranceformer A True Z Fanatic Join Date: Nov 2008 Location: Palm Beach, FL Posts: 1,213 Drives: 2009 370Z PW 6MT Rep Power: 268	Nice runs! I'm glad more racers are posting! I will add your time to the unofficial ranking later today. Here is a link... http://www.the370z.com/track-autocro...ack-times.html __________________ Ray 2009 370Z Base Sport 6MT / 12.860 @ 109.09mph / 1.921 60ft / street tires official 1/4 mile track times

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Official 370Z Autocross Thread	AutoX Z	Track / Autocross / Drifting / Dragstrip	1097	12-30-2022 05:44 PM
Official Solid Red 370Z Thread	xDIEGOx	Nissan 370Z Photos / Spyshots / Video / Media Gallery	1184	04-22-2022 09:34 AM
Official Nürburgring TOP 200 lap times	AK370Z	Track / Autocross / Drifting / Dragstrip	30	04-08-2016 03:12 AM
1/4 mile thread	Mercennarius	Nissan 370Z General Discussions	1	07-14-2009 10:34 AM
370Z official colors thread...	Outrun	The370Z.com Feedback, Suggestions & Questions	4	06-30-2009 10:26 PM

04-15-2011, 03:31 PM	#422 (permalink)
5700lucas Base Member Join Date: Sep 2010 Location: Denton Posts: 15 Drives: 2009 Nissan 370Z Rep Power: 15	SOAKA1 how is your 1/8 mile time 7.4**** ???? Thanks

05-27-2011, 01:03 PM	#433 (permalink)
03WhiteGT Base Member Join Date: May 2011 Location: Dallas, TX Posts: 31 Drives: 2008 Corvette Rep Power: 14	Hello all!! New to the forums. Took my 2011 Base m6 Z to Texas Motorplex last night. Couldn't hook for crap in 1st or on the 1-2 shift. There was zero track prep and no slick car to lay down fresh rubber. All in all, she did better than I expected. This is Bone Stock, no mods with only 800 miles. Car # 050 is me. What can i do to limit the damn wheel hop??? Its horrible... 1 60 - 2.119 330 - 5.842 1/8 - 8.844 mph - 82.61 1000 - 11.407 1/4 - 13.574 mph - 104.54 2 60- 2.288 330 - 5.975 1/8 - 8.957 mph - 83.11 1000 - 11.508 1/4 - 13.666 mph - 105.11