Nissan Mesh Grill

Rusty · 12-25-2012, 02:37 AM

For you track junkies who would like to keep crap out of your front opening. I installed a Nissan MotorSports Mesh Grill. Part number 62851-RTZ40. List is $438.89. Phone, 888-833-3225. Took 6 months for me to get this thing.

The install is simple. Drill 4 holes. And use 2 screws to hold it in place. It's shipped flat. You have to gentle bend it to fit the bumper contour. It took me about 2 hours of bending, and fitting to get it right. Once I got the contour the way I wanted it. I sprayed it with Plastic-Dip.

Note: This is for the Nismo bumper only.

Rusty · 12-25-2012, 02:39 AM

More pic's.

HArturo319 · 12-25-2012, 05:51 AM

$438 for chicken wire (i know it's not literally chicken wire)?! To have to contour yourself? Not worth it man. I can see this as a DIY project for sure.

As far as functionality goes? I'm sure it gets the job done.

sixpax · 12-25-2012, 07:51 AM

Looks great !

Baer383 · 12-25-2012, 10:57 AM

Quote:

Originally Posted by sixpax

Looks great !

ENT-Z · 12-25-2012, 11:29 AM

I love the look. Just can't imagine paying that much for mesh!

Rusty · 12-25-2012, 01:08 PM

I said it lists for $438.89. Did I pay that much for it? No.

anthonyy · 12-25-2012, 01:19 PM

looks awesome! +1 for OEM!

SPOHN · 12-25-2012, 05:14 PM

I like

Stino · 12-25-2012, 09:39 PM

Looks good!

I had the same thought when I installed both the upgraded Power Steering Cooler and Oil Cooler from Setrab. However, I purchased a black powder coated grill and mounted it behind the bumper. Total cost was about $45.

DR_ · 12-26-2012, 03:35 PM

Good idea. I had a rock hit my oil cooler in the season championship race and it leaked oil all over my header and caused a fire.

Cmike2780 · 12-26-2012, 03:58 PM

Behind the grill actually looks pretty good

Z-Girl 12 · 12-26-2012, 08:18 PM

Quote:

Originally Posted by Stino

Looks good!

I had the same thought when I installed both the upgraded Power Steering Cooler and Oil Cooler from Setrab. However, I purchased a black powder coated grill and mounted it behind the bumper. Total cost was about $45.

Very nice!

Stino · 12-27-2012, 08:21 AM

Considering the upgraded coolers, I also removed the outer front pieces outside the fangs and added the grill there for added air flow. It actually looks like it's stock.

I'm in no way affiliated with this company, however, here is the link to the product I purchased.

customcargrills.com - Diamond Mesh

wstar · 12-29-2012, 08:41 AM

For the DIY crowd, Spohn did it the cheap home-made way here: Spohn's Journal

And then I copied it here: wstar's Journal

12-25-2012, 05:51 AM	#3 (permalink)
HArturo319 Enthusiast Member Join Date: Jun 2012 Location: Houston, TX Posts: 323 Drives: 2013 PW NISMO Rep Power: 13	$438 for chicken wire (i know it's not literally chicken wire)?! To have to contour yourself? Not worth it man. I can see this as a DIY project for sure. As far as functionality goes? I'm sure it gets the job done. XwChriswX, Baer383 and Brendan like this. __________________ Me And Zoloft Get Along Just Fine

12-25-2012, 11:29 AM	#6 (permalink)
ENT-Z Enthusiast Member Join Date: Feb 2009 Location: St. Louis, MO Posts: 460 Drives: 09 MB 6MT 370Z Rep Power: 16	I love the look. Just can't imagine paying that much for mesh! carlitos_370z likes this.

12-25-2012, 01:08 PM	#7 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I said it lists for $438.89. Did I pay that much for it? No. HArturo319, Hotrodz and carlitos_370z like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-25-2012, 05:14 PM	#9 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I like __________________

12-25-2012, 09:39 PM	#10 (permalink)
Stino Base Member Join Date: Apr 2011 Location: Florida Posts: 159 Drives: 2010 370Z Sport Rep Power: 14	Looks good! I had the same thought when I installed both the upgraded Power Steering Cooler and Oil Cooler from Setrab. However, I purchased a black powder coated grill and mounted it behind the bumper. Total cost was about $45. XwChriswX, RN SHARK, redline727 and 5 others like this. __________________ 10 370Z Sport\|Berk CBE & HFC\|NISMO R-TUNE CAI\|Z1 Oil & PS Coolers\|Mishimoto Radiator\|UpRev\|Nismo S-Tune\|SEIBON Spoiler\|Eibach Sways, Springs, Spacers\|SPC Camber\|RJM Clutch Pedal\|Enkei Wheels\|StopTech Rotors & Pads\|SS Brake/Clutch Lines\|Alpine W900BT, PDX5, Rear Camera, Boston SR60, S35 & 10" G3 Sub\|3M Ceramic Tint

12-25-2012, 01:19 PM	#8 (permalink)
anthonyy A True Z Fanatic Join Date: Apr 2011 Location: Los Gatos, CA Posts: 1,027 Drives: Lexus CT Rep Power: 16	looks awesome! +1 for OEM!

12-26-2012, 03:35 PM	#11 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 17	Good idea. I had a rock hit my oil cooler in the season championship race and it leaked oil all over my header and caused a fire.

12-26-2012, 03:58 PM	#12 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	Behind the grill actually looks pretty good __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

12-27-2012, 08:21 AM	#14 (permalink)
Stino Base Member Join Date: Apr 2011 Location: Florida Posts: 159 Drives: 2010 370Z Sport Rep Power: 14	Considering the upgraded coolers, I also removed the outer front pieces outside the fangs and added the grill there for added air flow. It actually looks like it's stock. I'm in no way affiliated with this company, however, here is the link to the product I purchased. customcargrills.com - Diamond Mesh Brendan likes this. __________________ 10 370Z Sport\|Berk CBE & HFC\|NISMO R-TUNE CAI\|Z1 Oil & PS Coolers\|Mishimoto Radiator\|UpRev\|Nismo S-Tune\|SEIBON Spoiler\|Eibach Sways, Springs, Spacers\|SPC Camber\|RJM Clutch Pedal\|Enkei Wheels\|StopTech Rotors & Pads\|SS Brake/Clutch Lines\|Alpine W900BT, PDX5, Rear Camera, Boston SR60, S35 & 10" G3 Sub\|3M Ceramic Tint

12-29-2012, 08:41 AM	#15 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	For the DIY crowd, Spohn did it the cheap home-made way here: Spohn's Journal And then I copied it here: wstar's Journal SPOHN, sixpax and carlitos_370z like this. __________________ 7AT Track Car! Journal thread / Car setup details

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ring on mesh grill?	Apoc370z	Exterior & Interior	4	08-17-2012 01:42 PM
Grill Mesh	kielbasa16	Exterior & Interior	21	04-26-2011 12:13 PM
Traeger Grill	tmjohansen	The Lounge (Off Topic)	2	10-13-2010 02:10 PM
Bilet Grill	Puma0183	Exterior & Interior	19	06-16-2009 12:08 PM