Square Setup 18x10 25mm Offset

ResIpsa · 11-18-2012, 06:49 PM

I appreciate all the responses. It is always nice to have actual field tested advice on this forum. Luckily, I had not pulled the trigger and purchased the 18x10 +25 offsets (I had my heart set on some Konig Milligrams from Discount Tire Direct at $240 a wheel).

I plan to get a square set of 18x10 +35 offsets for next season.

I have been looking at the ForgeStars and Enkei wheels. However, I don’t give a s#it about having name brand wheels. Does anyone have a suggestion for a reliable inexpensive wheel in this size?

Again. Thanks for the tips.

…and I know this forum well enough that someone would feel the need to start a fight over something. However, I did not think that it would be from a rouge 350Z driver! LOL!

clintfocus · 11-18-2012, 07:16 PM

Quote:

Originally Posted by ResIpsa

I appreciate all the responses. It is always nice to have actual field tested advice on this forum. Luckily, I had not pulled the trigger and purchased the 18x10 +25 offsets (I had my heart set on some Konig Milligrams from Discount Tire Direct at $240 a wheel).

I plan to get a square set of 18x10 +35 offsets for next season.

I have been looking at the ForgeStars and Enkei wheels. However, I don’t give a s#it about having name brand wheels. Does anyone have a suggestion for a reliable inexpensive wheel in this size?

Again. Thanks for the tips.

…and I know this forum well enough that someone would feel the need to start a fight over something. However, I did not think that it would be from a rouge 350Z driver! LOL!

et35 18x10 in the front will be close to the inside suspension, but it should still clear(its 1mm more clearance then 18x10.5 et30 which i feel is the limit)

in the rear, for sure run a 25mm spacer

i didnt think we were fighting lol, just was trying to be clear

Mike · 11-19-2012, 09:37 AM

My forgestars were only 1200, that pretty cheap

ResIpsa · 11-19-2012, 10:40 AM

Quote:

Originally Posted by Mike

My forgestars were only 1200, that pretty cheap

I think forgestars are the way I am going to go. And I will take all your advice and do 18x10 +34.

Thanks.

03threefiftyz · 11-19-2012, 01:42 PM

Planned tire size?

Mike · 11-19-2012, 01:46 PM

Tire size selection is the only problem with 18s 285/35 are pretty short, but only theNT01 comes in 285/40, which is about ideal. On my other wheels, which are 18x9.5, I have Hoosier 295/40, I think, might be 35. They are a bit taller, b it work great. Going back to those on my forge stars too next time.

11-18-2012, 06:49 PM	#16 (permalink)
ResIpsa Track Member Join Date: Apr 2009 Location: Virginia Posts: 564 Drives: 09 RACING HEN Rep Power: 338	I appreciate all the responses. It is always nice to have actual field tested advice on this forum. Luckily, I had not pulled the trigger and purchased the 18x10 +25 offsets (I had my heart set on some Konig Milligrams from Discount Tire Direct at $240 a wheel). I plan to get a square set of 18x10 +35 offsets for next season. I have been looking at the ForgeStars and Enkei wheels. However, I don’t give a s#it about having name brand wheels. Does anyone have a suggestion for a reliable inexpensive wheel in this size? Again. Thanks for the tips. …and I know this forum well enough that someone would feel the need to start a fight over something. However, I did not think that it would be from a rouge 350Z driver! LOL! __________________ The Reed Law Firm; Michael Fasano VA Attorney and Counselor at Law: A Virginia Traffic, Criminal, and Family Lawyer.https://reedlawva.com/

11-19-2012, 09:37 AM	#18 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	My forgestars were only 1200, that pretty cheap __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

11-19-2012, 01:46 PM	#21 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Tire size selection is the only problem with 18s 285/35 are pretty short, but only theNT01 comes in 285/40, which is about ideal. On my other wheels, which are 18x9.5, I have Hoosier 295/40, I think, might be 35. They are a bit taller, b it work great. Going back to those on my forge stars too next time. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Up late on the internet = new wheels 18x10.5 TSW Nurburgring 27 offset	cossie1600	Wheels & Tires	14	12-15-2012 06:33 PM
Staggered or square setup?	sojirovskensi	Nissan 370Z General Discussions	34	07-30-2012 05:28 AM
RAYS RE30 - 19x11.0 Square Setup 21.6 Lbs Per Wheel \|\| Super Clearance Price	RavSpec	RavSpec - JDMwheel	0	11-04-2011 02:58 PM
Newest WORK Emotion 11R-"FT" Arriving May 2nd 18x10.5 +22mm Offset	RavSpec	Tires/Wheels	2	04-19-2011 06:23 PM
Square Cutout?	Zyonara	Exterior & Interior	13	02-18-2010 12:47 AM

11-19-2012, 01:42 PM	#20 (permalink)
03threefiftyz Track Member Join Date: Apr 2010 Location: MD Posts: 536 Drives: 03 350z 6mt Rep Power: 16	Planned tire size?