I appreciate all the responses. It is always nice to have actual field tested advice on this forum. Luckily, I had not pulled the trigger and purchased the 18x10 +25 offsets (I had my heart set on some Konig Milligrams from Discount Tire Direct at $240 a wheel).

I plan to get a square set of 18x10 +35 offsets for next season.

I have been looking at the ForgeStars and Enkei wheels. However, I don’t give a s#it about having name brand wheels. Does anyone have a suggestion for a reliable inexpensive wheel in this size?

Again. Thanks for the tips.

…and I know this forum well enough that someone would feel the need to start a fight over something. However, I did not think that it would be from a rouge 350Z driver! LOL!

et35 18x10 in the front will be close to the inside suspension, but it should still clear(its 1mm more clearance then 18x10.5 et30 which i feel is the limit)

in the rear, for sure run a 25mm spacer

i didnt think we were fighting lol, just was trying to be clear

My forgestars were only 1200, that pretty cheap

I think forgestars are the way I am going to go. And I will take all your advice and do 18x10 +34.

Thanks.

Planned tire size?

Tire size selection is the only problem with 18s 285/35 are pretty short, but only theNT01 comes in 285/40, which is about ideal. On my other wheels, which are 18x9.5, I have Hoosier 295/40, I think, might be 35. They are a bit taller, b it work great. Going back to those on my forge stars too next time.