anyone installed Iq3 datalogger?

martin82 · 11-27-2012, 01:31 PM

Thank's for the reply, I did not yet buy the odb2 module that plugs in right behind the dash. My friend bought a lot of these so I got one decently priced. I will be orderign the odb2 soon though and it is plug and play.

I still rather connect the RPM via the wire instead of odb2 based on refresh rates.... I will update again in a few days when I have time to finish things up. The GPS on this isn't the greatest, takes a few minutes to acquire a signal and it's best to have it outside the car..... might stick it on the hatch somewhere (magnetic) or just open the window and put it on the roof while at the track...

whis9 · 12-13-2012, 05:50 AM

In for updates

martin82 · 12-13-2012, 01:35 PM

I haven't ordered the ob2 module yet, my friend is pricing it out!! Next on order is their universal 4 sensor USM module and add an oil pressure sensor. The Iq3 will output it and I can setup warning lights etc!

Ron · 04-06-2013, 09:13 AM

bump! did u ever find where to tap for rpm signal?

martin82 · 05-02-2013, 02:53 PM

Ron, sorry this was on the back burner, I did not tap into the rpm signal wire, I just ordered an obd2 Wire for the racepak, got lucky and found one on ebay for $280 just now, I still need to tap into the rpm signal wire.

I also bought a steering column upper cover so I can relocate my iq3 dash in front of the stock dash.
Here's a quick chop I am removing it from the center cubby hole to here:

Also ordered one of these: Haltech IQ3 Dash Mounting Bracket Black Anodized Aluminum HT06 800 MB IQ3 | eBay

this bracket is very expensive through racepak, I found that one very cheap... or you can make your own. I won't be able to do all this until 1-2 weeks, have a time attack this weekend so getting the car prepped.

martin82 · 09-29-2014, 02:59 PM

Finally getting to relocating everything not finished yet:

GSS138 · 09-29-2014, 09:49 PM

Lookin good man, ETA on Martin at the track?

martin82 · 09-30-2014, 03:55 AM

I have to run this Thursday and car is far from done...... Fr Shootout by superstreet/import tuner.

Some updates, tachometer, shift lights and gear indicator have been programmed

sig11 · 09-30-2014, 04:50 PM

What does it use for those signals? CAN?

martin82 · 10-01-2014, 08:46 PM

There is an obd2 cable you can buy extra, or you buy sensors but they are VERY expensive $300-450 each.... RPM signal you just tape into ECU rpm wire, pin 110.

Just having issues getting the obd2 to read right now will have to send it to manufacturer.

04-06-2013, 09:13 AM	#19 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 22	bump! did u ever find where to tap for rpm signal? __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

09-29-2014, 09:49 PM	#22 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 13	Lookin good man, ETA on Martin at the track? __________________ Current Mods: Vorpal Weapon +5.

09-30-2014, 03:55 AM	#23 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	I have to run this Thursday and car is far from done...... Fr Shootout by superstreet/import tuner. Some updates, tachometer, shift lights and gear indicator have been programmed Rangerz likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does anyone have this installed???	DEpointfive0	Engine & Drivetrain	4	09-27-2012 12:02 AM
free ebook on datalogger	cossie1600	Track / Autocross / Drifting / Dragstrip	0	07-25-2012 02:14 PM
Tying in a datalogger (DL1 in my case) to the ECU?	vjarnot	Track / Autocross / Drifting / Dragstrip	7	05-19-2012 11:28 AM
anyone have a datalogger?	cossie1600	Track / Autocross / Drifting / Dragstrip	9	05-17-2011 02:43 PM
recommendations for scantool/datalogger	Pharmacist	Nissan 370Z General Discussions	3	12-01-2010 09:52 AM

11-27-2012, 01:31 PM	#16 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Thank's for the reply, I did not yet buy the odb2 module that plugs in right behind the dash. My friend bought a lot of these so I got one decently priced. I will be orderign the odb2 soon though and it is plug and play. I still rather connect the RPM via the wire instead of odb2 based on refresh rates.... I will update again in a few days when I have time to finish things up. The GPS on this isn't the greatest, takes a few minutes to acquire a signal and it's best to have it outside the car..... might stick it on the hatch somewhere (magnetic) or just open the window and put it on the roof while at the track...

12-13-2012, 05:50 AM	#17 (permalink)
whis9 Base Member Join Date: Dec 2012 Location: Dayton Posts: 54 Drives: 2003 under the knife Rep Power: 12	In for updates

12-13-2012, 01:35 PM	#18 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	I haven't ordered the ob2 module yet, my friend is pricing it out!! Next on order is their universal 4 sensor USM module and add an oil pressure sensor. The Iq3 will output it and I can setup warning lights etc!

05-02-2013, 02:53 PM	#20 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Ron, sorry this was on the back burner, I did not tap into the rpm signal wire, I just ordered an obd2 Wire for the racepak, got lucky and found one on ebay for $280 just now, I still need to tap into the rpm signal wire. I also bought a steering column upper cover so I can relocate my iq3 dash in front of the stock dash. Here's a quick chop I am removing it from the center cubby hole to here: Also ordered one of these: Haltech IQ3 Dash Mounting Bracket Black Anodized Aluminum HT06 800 MB IQ3 \| eBay this bracket is very expensive through racepak, I found that one very cheap... or you can make your own. I won't be able to do all this until 1-2 weeks, have a time attack this weekend so getting the car prepped.

09-29-2014, 02:59 PM	#21 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Finally getting to relocating everything not finished yet:

09-30-2014, 04:50 PM	#24 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 18	What does it use for those signals? CAN?

10-01-2014, 08:46 PM	#25 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	There is an obd2 cable you can buy extra, or you buy sensors but they are VERY expensive $300-450 each.... RPM signal you just tape into ECU rpm wire, pin 110. Just having issues getting the obd2 to read right now will have to send it to manufacturer.