Help with Hoosier A6 sizing

gomer_110 · 10-18-2012, 08:12 PM

Plan on going to a squared setup for AutoX next year with Hoosier A6's. Just need some help figuring out the right tire size. Plan is to do 295's on 18's, just not sure what height in order to avoid fitment problems. Currently I'm at stock ride height on my Nismo but will probably be doing coilovers in the future.

As far as I can tell 295/40-18 will be the closest to stock diameter at just 0.6" larger but is this too tall?

AutoX Z · 10-18-2012, 08:28 PM

What wheel sizes?

gomer_110 · 10-18-2012, 08:35 PM

Well I was looking at a deal on 18x10 +30 and 18x11 +18 TE37SL's.

Considering I'm an idiot when it comes to wheel offsets, etc. I'm not even sure if these sizes will work for what I want.

Mike · 10-18-2012, 10:34 PM

When I run Hoosiers, thats what I run. the smaller 18" Hoosiers are too short and make my car scrape the front end under braking. 275/40 is ideal, but they don't make that, only 275/35 which are too short.

This is the 295/40s

cossie1600 · 10-18-2012, 10:39 PM

I have a feeling you will rub

gomer_110 · 10-18-2012, 10:50 PM

Quote:

Originally Posted by cossie1600

I have a feeling you will rub

Stupid question but, why are saying this? wrong offsets, too much tire, or something else?

cossie1600 · 10-18-2012, 11:01 PM

It's just a guess. I mounted 9.5 rim with 285 tires on 35mm. I barely had any room left. You might want to check with the hardcore guys to see what they are using. I don't want to see you waste money for nothing

Mike · 10-19-2012, 12:22 PM

I run 9.5 +46 with the 295s. They need a 5mm spacer to clear the inner control arm.

I also run 10 +34, they fit fine both inside and outside.

03threefiftyz · 10-20-2012, 10:04 AM

I'd run 315 at least in the back. Learic runs square 295's on her CS 370. Doesn't seem to rub.

10-18-2012, 08:12 PM	#1 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	Help with Hoosier A6 sizing Plan on going to a squared setup for AutoX next year with Hoosier A6's. Just need some help figuring out the right tire size. Plan is to do 295's on 18's, just not sure what height in order to avoid fitment problems. Currently I'm at stock ride height on my Nismo but will probably be doing coilovers in the future. As far as I can tell 295/40-18 will be the closest to stock diameter at just 0.6" larger but is this too tall? __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

10-18-2012, 08:28 PM	#2 (permalink)
AutoX Z Enthusiast Member Join Date: Jun 2009 Location: Houston, Tx Posts: 314 Drives: 370Z Base, Sport Rep Power: 16	What wheel sizes? __________________ 2013 SCCA Solo National Champion VVV For Sale VVV

10-18-2012, 08:35 PM	#3 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	Well I was looking at a deal on 18x10 +30 and 18x11 +18 TE37SL's. Considering I'm an idiot when it comes to wheel offsets, etc. I'm not even sure if these sizes will work for what I want. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

10-18-2012, 10:34 PM	#4 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	When I run Hoosiers, thats what I run. the smaller 18" Hoosiers are too short and make my car scrape the front end under braking. 275/40 is ideal, but they don't make that, only 275/35 which are too short. This is the 295/40s __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

10-19-2012, 12:22 PM	#8 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	I run 9.5 +46 with the 295s. They need a 5mm spacer to clear the inner control arm. I also run 10 +34, they fit fine both inside and outside. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

10-18-2012, 10:39 PM	#5 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	I have a feeling you will rub

10-18-2012, 11:01 PM	#7 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	It's just a guess. I mounted 9.5 rim with 285 tires on 35mm. I barely had any room left. You might want to check with the hardcore guys to see what they are using. I don't want to see you waste money for nothing

10-20-2012, 10:04 AM	#9 (permalink)
03threefiftyz Track Member Join Date: Apr 2010 Location: MD Posts: 536 Drives: 03 350z 6mt Rep Power: 16	I'd run 315 at least in the back. Learic runs square 295's on her CS 370. Doesn't seem to rub.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Questions about Hoosier a6's	fastguy9r	Track / Autocross / Drifting / Dragstrip	2	09-13-2012 09:45 PM
Hoosier A6's...	sixpax	Track / Autocross / Drifting / Dragstrip	20	07-10-2012 03:23 PM
Hoosier R6 in 295 30 19	cossie1600	Track / Autocross / Drifting / Dragstrip	12	04-16-2012 11:08 PM
Hoosier A6 tire widths?	spoolio	Wheels & Tires	3	03-07-2009 01:38 PM