![]() |
Turn off VDC, put it in M-mode in first gear, hold the footbrake and raise the revs just a little (2K-ish or less), then side-step the brake and roll into
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#8 (permalink) |
A True Z Fanatic
![]() Join Date: Mar 2009
Location: Houston, TX
Posts: 4,024
Drives: too slow
Rep Power: 3595 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Turn off VDC, put it in M-mode in first gear, hold the footbrake and raise the revs just a little (2K-ish or less), then side-step the brake and roll into the gas pedal smoothly and quickly and manage traction with the pedal and the steering wheel. Also, don't hold with that footbrake for too long, just a second or two. If you hold it long you'll quickly overheat the fluid. 2nd gear pulls pretty hard, it's better to make the mistake of shifting to 2nd a little early than to wait a fraction of a second too late and bump into the soft rev-limiter at the top of 1st (which you'll reach very very quickly, and you have to keep the 7AT's shift input lag in mind...).
But really, who cares about first gear? Drag racing a car just puts a bunch of unnecessary stress on the drivetrain. All the real fun happens in 3rd-5th gears and involves frequent cornering and braking ![]() Last edited by wstar; 08-26-2012 at 07:26 AM. |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Auto trans throttle blip | jpkirk | Engine & Drivetrain | 6 | 06-02-2012 03:13 PM |
Auto Trans Service | dawudih | DIY Section (Do-It-Yourself) | 3 | 12-24-2011 05:02 PM |
Auto-trans. reliability if paddle shifting | mark1963 | Engine & Drivetrain | 15 | 08-29-2011 03:58 PM |
HELP With Auto Trans on 370z | Finite | Nissan 370Z General Discussions | 2 | 02-25-2009 10:49 AM |
Auto Trans dumb question (maybe) | JoeyD | Engine & Drivetrain | 12 | 01-25-2009 10:32 PM |