SCCA Nat'l Tour - Blythville AR

///MSH

Is anyone going to the Nat'l tour event in AR this weekend. At the moment it is me and 4 Evo's signed up for ASP.....Let me know who's going!!!

__________________
2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

03threefiftyz

Nope. I only have the Evo shootut in Dover, Toledo Pro, and Nationals left on my schedule.

AutoX Z

I'll be there.

__________________
2013 SCCA Solo National Champion
VVV For Sale VVV

///MSH

That's great....I didn't see any other Z's registered. Well, I did see one that, as far as i can tell, was mis-classified into CS.....is that you?

Any nat'l level experience against the Evo's? Locally, they're not an issue, but this is my first Nat'l in 10 yrs...

__________________
2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

///MSH

Yes I'm quoting myself...I just checked the classifications, and as you know, your all good in CS. I bought the wrong car

__________________
2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

03threefiftyz

Foley and Aaron Miller (especially) are very fast....you've probably found that out by now.

///MSH

Yep...I had heard, and I have since confirmed. Day 1 was bad (rain), but day 2 was much better.

Ashout out to AutoX Z....fast and a nice guy!!!!!

__________________
2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

03threefiftyz

That's probably the best, no buetzer, pax at a national event in CS in a while. Nice job, Autox Z.

AutoX Z

Thanks for the kind words. The car was handling really well both days (even on "used" tires). I knew I drove well but thought I would finish lower in the PAX, behind a lot more of the smaller, momentum cars.

Nice meeting you at the event Martin. Its always nice to meet another guy brave enough to buck the establishment cars and soldier on in the Z. I think there are only 4 of us out there competing nationally now.

I will try and get some videos up later this week.

__________________
2013 SCCA Solo National Champion
VVV For Sale VVV

///MSH

It's that time of year again here in AR. Who's going to SCCA summer Nat'l tour.

As some of may have seen, I cleaned-out some old parts and ordered some DA 8300 Penske shocks. For this setup...Several concessions were made to keep it all ASP legal, but hopefully the "program" will do better this year.

So....this is a roll call - who will be there and in what class?

__________________
2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

nismosis

I'll see you all at the Nat stuff next year with my Z when R-comps are finally kicked out. I'm co-driving my buddy's S2000 this year since he's willing to pony up for BFG R1's for the time being.

///MSH

Well I respect that u have a plan.....can't argue that. See u next year!!!

I talked with some friends friends from the Arkansas region and there will be at least 3 other drivers in ASP....my co-driver and two Porsche guys. If I'm not mistaken, that means, some contingencies will be will be available. Another car, I think, will open the door to most all possible contengencies.

Come on guys - there's got to be some more 370Z cars willing and able to sign-up.

On a positive note....I did get my 8300 DA Remote Resevoirs installed for the event.....although this will be my first event on this setup. It will be a tuning event with year-end Nat's on the calendar.

__________________
2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

Z1NONLY

Going to the Blytheville event(s)

In my brother's Mini.

///MSH

That's awesome...at some point PM your class and number and maybe we'll X paths. I'm ASP139

Update:
Got car aligned and corner weighted today with new setup.
I'm curious how the car will do with 1200lb rear and 1100lb front springs. Tons of neg camber front and rear, 50.0 cross weight, and 3365lbs with me and 4 gallons.
See photo....

Attached Images

image.jpg (591.2 KB, 9 views)

__________________
2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

Z1NONLY

71 RT2/RTF (H stock)

I wish my Z was prepped but the Mini is a lot cheaper. My brother ordered everything but shocks to bring it up to full prep, but I'm not sure he can get all the parts on the car in time. We will see. (And I'll drive whatever he has ready)