FML, Broken again :(

Shamu · 06-03-2012, 08:35 PM

What kind of LSD? Did you have cooler on rear diff? They get real hot.

KaienZ34 · 06-03-2012, 09:01 PM

He has an upgraded LSD, i don't remember which one and yes he does have a rear diff cooler.

HKYStormFront · 06-03-2012, 09:24 PM

he's got the Quaife diff with GTM diff cooler

Mike · 06-04-2012, 04:18 AM

Quote:

Originally Posted by HKYStormFront

he's got the Quaife diff with GTM diff cooler

what he said. The diff cooler was definitely doing its job too.

Shamu · 06-04-2012, 11:17 AM

Hmm will be intersted knowing what went pop!

Mike · 06-09-2012, 07:30 PM

they said the grinding in reverse noise was a stuck/hanging up brake pad and the whine is worn gear in the differential. Not sure how it got worn so fast though.

Now the question is, do I change gear ratios? Not sure what to do yet.

HKYStormFront · 06-09-2012, 07:38 PM

4:10 gear gets my vote

(or is it 4.08?)

KaienZ34 · 06-09-2012, 07:59 PM

I think it 4.08's

SPOHN · 06-09-2012, 08:28 PM

So was this worn after the LSD install? Seems it would have to be being this would of obviously been seen when installing. Did the LSD have to be shimmed? Was the backlash checked?

Mike · 06-10-2012, 10:10 AM

Quote:

Originally Posted by SPOHN

So was this worn after the LSD install? Seems it would have to be being this would of obviously been seen when installing. Did the LSD have to be shimmed? Was the backlash checked?

I don't know at this point. All I had was a phone message. Think I will stick with stock gearing, don't want to lose the SRM

Daishi9000 · 05-23-2013, 10:44 PM

i got a quaife installed on my open diff 6 speed.
i noticed it was making the whining sound. so i told the shop that installed it and he said it was normal. so i've driven the car a few hundred miles. also installed new bearings.
i will talk with him and make him fix this, but could the quaife be damaged? will i need new bearings and gears?

clintfocus · 05-23-2013, 10:53 PM

if your diff is making a whine noises, its because the ring and pinion contact is not correct and the back lash needs to be re checked

chrischhorn · 05-23-2013, 10:58 PM

Quote:

Originally Posted by Daishi9000

i got a quaife installed on my open diff 6 speed.
i noticed it was making the whining sound. so i told the shop that installed it and he said it was normal. so i've driven the car a few hundred miles. also installed new bearings.
i will talk with him and make him fix this, but could the quaife be damaged? will i need new bearings and gears?

Sounds like it wasn't shimmed correctly. Thats why I'm having my shop put it together and not in the car. I've also requested when it is done, that they show me the diff gear painted so I can personally see the contact pattern. Its hit or miss with shops out here in Hawaii.....and we are very limited on choices.

Daishi9000 · 05-23-2013, 10:59 PM

ok. i will need to take off and have them check it.
do you think gears or bearing might have to be replaced?

Daishi9000 · 05-23-2013, 11:01 PM

i had a shop do this install, because i didn't want to screw it up.
but i doubt they checked the backlash like you explain.

06-03-2012, 08:35 PM	#16 (permalink)
Shamu A True Z Fanatic Join Date: Jan 2011 Location: Nor Cal Posts: 1,059 Drives: 370Z Racecar Rep Power: 19	What kind of LSD? Did you have cooler on rear diff? They get real hot. __________________ Grant

06-03-2012, 09:01 PM	#17 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	He has an upgraded LSD, i don't remember which one and yes he does have a rear diff cooler. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

06-03-2012, 09:24 PM	#18 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	he's got the Quaife diff with GTM diff cooler __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

06-04-2012, 11:17 AM	#20 (permalink)
Shamu A True Z Fanatic Join Date: Jan 2011 Location: Nor Cal Posts: 1,059 Drives: 370Z Racecar Rep Power: 19	Hmm will be intersted knowing what went pop! __________________ Grant

06-09-2012, 07:30 PM	#21 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	they said the grinding in reverse noise was a stuck/hanging up brake pad and the whine is worn gear in the differential. Not sure how it got worn so fast though. Now the question is, do I change gear ratios? Not sure what to do yet. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

06-09-2012, 07:38 PM	#22 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	4:10 gear gets my vote (or is it 4.08?) __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

06-09-2012, 07:59 PM	#23 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	I think it 4.08's __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

06-09-2012, 08:28 PM	#24 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	So was this worn after the LSD install? Seems it would have to be being this would of obviously been seen when installing. Did the LSD have to be shimmed? Was the backlash checked? __________________

05-23-2013, 10:44 PM	#26 (permalink)
Daishi9000 Enthusiast Member Join Date: May 2011 Location: Fresno Ca, Posts: 257 Drives: 370z Touring 6M PW Rep Power: 14	i got a quaife installed on my open diff 6 speed. i noticed it was making the whining sound. so i told the shop that installed it and he said it was normal. so i've driven the car a few hundred miles. also installed new bearings. i will talk with him and make him fix this, but could the quaife be damaged? will i need new bearings and gears?

05-23-2013, 10:53 PM	#27 (permalink)
clintfocus Track Member Join Date: Jan 2011 Location: los angeles Age: 38 Posts: 933 Drives: 370z, EK Civic, F150 Rep Power: 15	if your diff is making a whine noises, its because the ring and pinion contact is not correct and the back lash needs to be re checked

05-23-2013, 10:59 PM	#29 (permalink)
Daishi9000 Enthusiast Member Join Date: May 2011 Location: Fresno Ca, Posts: 257 Drives: 370z Touring 6M PW Rep Power: 14	ok. i will need to take off and have them check it. do you think gears or bearing might have to be replaced?

05-23-2013, 11:01 PM	#30 (permalink)
Daishi9000 Enthusiast Member Join Date: May 2011 Location: Fresno Ca, Posts: 257 Drives: 370z Touring 6M PW Rep Power: 14	i had a shop do this install, because i didn't want to screw it up. but i doubt they checked the backlash like you explain.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z got broken in to :(	Effen5	Nissan 370Z General Discussions	61	05-25-2012 04:58 PM
Car is broken-in.	AndreZ Cadena	Nissan 370Z General Discussions	33	07-07-2011 10:01 PM
Car broken into. @_@	definitionxmk	Hawaii	9	04-11-2011 05:20 PM
broken down zed	cyrus_b	Australia/New Zealand	10	05-19-2010 02:52 AM