Camber Settings for Street/Track

nasm

Will order them soon, the sway bar is on the way. many thanks for sharing the details as well.

Thank you rusty, so correct me if I am wrong, I need to get the front control arm (FUCA), for the rear I need toe and camber arms? both? is that correct?

Regarding the brand, I think for the fuca SPL for sure, but for the rear arms, SPL or Z1?

__________________
Sold: A7 370z 2014 - Stillen Catback - Testpipes - UpRev - Dropin filters - Silicon intake pipes - BC racing coil overs - Z1 Subframe collars - Z1 Engine and Trans Mounts - Oil cooler - CatchCan - Z1 brake lines. Now: I am building another car

Hotrodz

Don't even think anything else other than SPL for suspension parts.

Sent from my SM-G965U using Tapatalk

__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|

Rusty

Going fast at the track. SPL. Anything else is an accident waiting to happen.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

OptionZero

Spl for sure. Z1 has known failures, less adjustability.

In the rears you need camber arm, traction arm and EITHER the mid-links or toe arm:

If you run true type coilovers (spring wrapped around damper) you get the toe arm

If you run OEM type (spring separate from damper) you get the mid links.

This is all explained on their website

Also, you want their eccentric bolt lockout kit. Since your adjustments will be done with the arms you no longer want the factory eccentric bolts in the back to slip

__________________
OptionZero Build Thread

nasm

SLP then

__________________
Sold: A7 370z 2014 - Stillen Catback - Testpipes - UpRev - Dropin filters - Silicon intake pipes - BC racing coil overs - Z1 Subframe collars - Z1 Engine and Trans Mounts - Oil cooler - CatchCan - Z1 brake lines. Now: I am building another car

nasm

Many thanks for the useful info, highly appreciated.

Regards,

__________________
Sold: A7 370z 2014 - Stillen Catback - Testpipes - UpRev - Dropin filters - Silicon intake pipes - BC racing coil overs - Z1 Subframe collars - Z1 Engine and Trans Mounts - Oil cooler - CatchCan - Z1 brake lines. Now: I am building another car

nasm

Sorry to bother you guys, however, while browsing the rear camber arms, I have got two options:
1- SLP Billet camber arms Here

2- Titanium rear camber links Here

My question is, are these going to do the same purpose and the different is just the material (light weight)? and that's why it cost more? or is there anything else?

appreciate your reply.

Regards,
NASM

__________________
Sold: A7 370z 2014 - Stillen Catback - Testpipes - UpRev - Dropin filters - Silicon intake pipes - BC racing coil overs - Z1 Subframe collars - Z1 Engine and Trans Mounts - Oil cooler - CatchCan - Z1 brake lines. Now: I am building another car

redondoaveb

They do the same thing. Material differences

__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp

nasm

Thank you so much. Appreciated

__________________
Sold: A7 370z 2014 - Stillen Catback - Testpipes - UpRev - Dropin filters - Silicon intake pipes - BC racing coil overs - Z1 Subframe collars - Z1 Engine and Trans Mounts - Oil cooler - CatchCan - Z1 brake lines. Now: I am building another car

2011 Nismo#91

__________________
GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs