Autocrossing + Surprise Visitor

03threefiftyz · 05-16-2012, 12:14 PM

Quote:

Originally Posted by ResIpsa

I actually was going to comment on this but decided on my previous snarky comment. Take a look at your photos. You will notice that your outside front and rear tires are lifting at about the same rate. Ideally, you want as much rear traction as possible when auto crossing our cars. That means keeping those rear tires as connected to the pavement and getting the outside front tire to the point of lifting off the pavement.

I would suggest full stiff in the front and full soft in the rear. This would give you maximum grip when throttling out of corners. 0threefiftyz runs the massive Hotchkiss front bar and no sway bar in the rear. And he won the Tire Rack Solo Nationals in BSP.

I've won national events, not Nationals.....hopefully soon

.

I compensate with spring rate for the rear. It is still a little pushy, but you can get on the throttle so god damn early it is a worthwhile tradeoff.

370zDR · 05-16-2012, 01:42 PM

Quote:

I've won national events, not Nationals.....hopefully soon .

I compensate with spring rate for the rear. It is still a little pushy, but you can get on the throttle so god damn early it is a worthwhile tradeoff.

What tires and Camber settings are You running?

03threefiftyz · 05-16-2012, 03:55 PM

315 A6's on all 4. -2.5 in front -2.3 in rear. I need more in the front, but I'll have to either make my own control arms (already have heavily offset bushings) or offset the lower arm some.

370zDR · 05-16-2012, 10:58 PM

I'm thinking going Middle Front and Soft Rear might be a good starting point for Stillen Bars

05-16-2012, 10:58 PM	#19 (permalink)
370zDR Base Member Join Date: May 2012 Location: Santo Domingo, D.R Posts: 69 Drives: 2009 370Z Rep Power: 13	I'm thinking going Middle Front and Soft Rear might be a good starting point for Stillen Bars __________________ Uprev/F.I CBE 18"/Art Pipes/G3's/NST Pulleys/Z1cooler 25R/Tein's/20mm Ichiba/Stillen Sways/275-305's/Motul 600/Red Calipers/Matte Wheels & Handles/Stillen Splitter/S-Tune Skirts/Shine Rears/Blackout Headlights,fangs and Valance/Evo-R Fog/Project Mu

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Surprise Z costs	awkwardturtle	Nissan 370Z General Discussions	158	05-07-2014 08:16 PM
What size tires should i get for AutoCrossing?	Mozen	Wheels & Tires	18	07-05-2010 05:53 AM
Autocrossing the 370Z?	Kirkster	Track / Autocross / Drifting / Dragstrip	10	03-02-2009 12:17 AM

05-16-2012, 03:55 PM	#18 (permalink)
03threefiftyz Track Member Join Date: Apr 2010 Location: MD Posts: 536 Drives: 03 350z 6mt Rep Power: 16	315 A6's on all 4. -2.5 in front -2.3 in rear. I need more in the front, but I'll have to either make my own control arms (already have heavily offset bushings) or offset the lower arm some.