Fuel Starvation Control Product

clintfocus · 05-16-2013, 03:40 AM

incredible!!!

phunk · 06-28-2013, 05:47 PM

If there is enough interest, I am looking into building another batch of these now. Not sure if I should start a new thread for it perhaps? But I do need to gauge interest to give me an idea of how many to make, if any at all!

I am taking steps to investigate ways to try and reduce the cost a little bit. I am not sure if I will get far with that, or anywhere at all. Its pending some quotes I have going. But I would probably say its best idea to gauge it assuming the cost remained the same, and go from there. I know that if I can bring it down I will have a wider market. I intended to do some redesigning on it to make it easier to manufacture, but as time passes by, it just doesnt seem like something that is wise to invest my time into doing, for what I feel is a rather limited market.

From when I decide to pull the trigger on it and order material, we are probably looking at 8 weeks or so for production. Possibly sooner, but its hard to say having only made one batch so far.

If this product is something you would be interested in jumping on the next batch, please let me know. To date, I have not been contacted by any customers from the first batch to report any surprise issues.

370z Road Race Fuel Pump

wstar · 06-28-2013, 06:00 PM

I had a surprise issue! I didn't fill up my tank all day long at the track, and the car surprisingly didn't die

clintfocus · 06-28-2013, 10:15 PM

Quote:

Originally Posted by phunk

If there is enough interest, I am looking into building another batch of these now. Not sure if I should start a new thread for it perhaps? But I do need to gauge interest to give me an idea of how many to make, if any at all!

I am taking steps to investigate ways to try and reduce the cost a little bit. I am not sure if I will get far with that, or anywhere at all. Its pending some quotes I have going. But I would probably say its best idea to gauge it assuming the cost remained the same, and go from there. I know that if I can bring it down I will have a wider market. I intended to do some redesigning on it to make it easier to manufacture, but as time passes by, it just doesnt seem like something that is wise to invest my time into doing, for what I feel is a rather limited market.

From when I decide to pull the trigger on it and order material, we are probably looking at 8 weeks or so for production. Possibly sooner, but its hard to say having only made one batch so far.

If this product is something you would be interested in jumping on the next batch, please let me know. To date, I have not been contacted by any customers from the first batch to report any surprise issues.

370z Road Race Fuel Pump

count me in

Mr&Mrs · 06-29-2013, 02:21 AM

Quote:

Originally Posted by phunk

If there is enough interest, I am looking into building another batch of these now. Not sure if I should start a new thread for it perhaps? But I do need to gauge interest to give me an idea of how many to make, if any at all!

I am taking steps to investigate ways to try and reduce the cost a little bit. I am not sure if I will get far with that, or anywhere at all. Its pending some quotes I have going. But I would probably say its best idea to gauge it assuming the cost remained the same, and go from there. I know that if I can bring it down I will have a wider market. I intended to do some redesigning on it to make it easier to manufacture, but as time passes by, it just doesnt seem like something that is wise to invest my time into doing, for what I feel is a rather limited market.

From when I decide to pull the trigger on it and order material, we are probably looking at 8 weeks or so for production. Possibly sooner, but its hard to say having only made one batch so far.

If this product is something you would be interested in jumping on the next batch, please let me know. To date, I have not been contacted by any customers from the first batch to report any surprise issues.

370z Road Race Fuel Pump

I erased all my PMs so i lost your price but if it is, what I think it was, I am in.

G37sHKS · 06-29-2013, 05:31 AM

Will this fit g37 coupe?

On first post you said this unit is not for FI and FI people have to wait.. any update about that? (sorry i just cant read the whole 34 pages lol)

scruffydog · 06-29-2013, 09:55 AM

Count me in too

SPOHN · 06-29-2013, 10:08 AM

Quote:

Originally Posted by G37sHKS

Will this fit g37 coupe?

On first post you said this unit is not for FI and FI people have to wait.. any update about that? (sorry i just cant read the whole 34 pages lol)

We have talked about that. For your basic FI kits on stock block under 550whp you will be OK. Or anything that may exceed 255lph. But any thing more than that Phunk will have to explain. There's a couple routes that can be taken.

At the same time I really wouldn't mind going with a return fuel system for this system.

synolimit · 06-29-2013, 04:31 PM

To much to read. Why does this work? Is it like a surge tank? Is our fuel pumps just dangling in mid air inside the fuel tank?

Baer383 · 06-29-2013, 05:26 PM

Quote:

Originally Posted by SPOHN

We have talked about that. For your basic FI kits on stock block under 550whp you will be OK. Or anything that may exceed 255lph. But any thing more than that Phunk will have to explain. There's a couple routes that can be taken.

At the same time I really wouldn't mind going with a return fuel system for this system.

And we talked about this and it is completely unnecessary under 600 rwhp.

SPOHN · 06-29-2013, 06:12 PM

Quote:

Originally Posted by Baer383

And we talked about this and it is completely unnecessary under 600 rwhp.

Preparing for the future.

martin82 · 06-29-2013, 07:24 PM

Lol then I will buy urs spohn! Hand me down parts!!

SPOHN · 06-29-2013, 07:31 PM

Quote:

Originally Posted by martin82

Lol then I will buy urs spohn! Hand me down parts!!

I still keep the surge can setup. It will just have a return fuel setup added to it. Along with two fuel pumps.

takjak2 · 06-30-2013, 08:40 AM

Quote:

Originally Posted by synolimit

To much to read. Why does this work? Is it like a surge tank? Is our fuel pumps just dangling in mid air inside the fuel tank?

The stock pump effectively only pulls from one side of the tank with a big hump (over the drive-shaft) allowing all of the fuel to slosh sway from it. Phunk's product adds a second pump with its own second pickup on the other side of the tank. This second pump is in addition to the stock pump and lives inside a beautiful billet aluminum surge can. The new assembly is entirely contained within the stock fuel tank and the plumbing to the engine isn't changed. There is also some well engineered plumbing that goes on inside the tank to ensure long term reliability of the stock pump.

--A very happy customer.

SS_Firehawk · 06-30-2013, 10:16 AM

I definitely have some interest. Wife and I intend to use the $20k+ that's now sunk into the Z. We both will be taking some lessons and getting some track time with it. I got fuel starvation on a right hander beating a light with 4-5 dots left. It took about 4-5 miles for the fuel gauge to read correctly again. I'm trying to squash any known issues this car has. Mine is SC'd and using Walboro255LPH already. I'm supposed to be around 500whp, but no numbers as GTM's still finishing things up.

06-28-2013, 05:47 PM	#497 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	If there is enough interest, I am looking into building another batch of these now. Not sure if I should start a new thread for it perhaps? But I do need to gauge interest to give me an idea of how many to make, if any at all! I am taking steps to investigate ways to try and reduce the cost a little bit. I am not sure if I will get far with that, or anywhere at all. Its pending some quotes I have going. But I would probably say its best idea to gauge it assuming the cost remained the same, and go from there. I know that if I can bring it down I will have a wider market. I intended to do some redesigning on it to make it easier to manufacture, but as time passes by, it just doesnt seem like something that is wise to invest my time into doing, for what I feel is a rather limited market. From when I decide to pull the trigger on it and order material, we are probably looking at 8 weeks or so for production. Possibly sooner, but its hard to say having only made one batch so far. If this product is something you would be interested in jumping on the next batch, please let me know. To date, I have not been contacted by any customers from the first batch to report any surprise issues. 370z Road Race Fuel Pump scruffydog, Megan370z, SPOHN and 1 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph Last edited by phunk; 06-28-2013 at 05:51 PM.

06-28-2013, 06:00 PM	#498 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	I had a surprise issue! I didn't fill up my tank all day long at the track, and the car surprisingly didn't die phunk, Mike, sig11 and 6 others like this. __________________ 7AT Track Car! Journal thread / Car setup details

06-29-2013, 05:31 AM	#501 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	Will this fit g37 coupe? On first post you said this unit is not for FI and FI people have to wait.. any update about that? (sorry i just cant read the whole 34 pages lol) __________________ G37 BUILD UNDER CONSTRUCTION

06-29-2013, 09:55 AM	#502 (permalink)
scruffydog A True Z Fanatic Join Date: Jan 2009 Location: Nor Cal Posts: 1,113 Drives: with his eyes close Rep Power: 717	Count me in too phunk likes this. __________________ Magnetic Black 2010 370z Scruffydog's Journal

06-29-2013, 04:31 PM	#504 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	To much to read. Why does this work? Is it like a surge tank? Is our fuel pumps just dangling in mid air inside the fuel tank? __________________ 13 370z-

05-16-2013, 03:40 AM	#496 (permalink)
clintfocus Track Member Join Date: Jan 2011 Location: los angeles Age: 39 Posts: 933 Drives: 370z, EK Civic, F150 Rep Power: 15	incredible!!!

06-29-2013, 07:24 PM	#507 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Lol then I will buy urs spohn! Hand me down parts!!

06-30-2013, 10:16 AM	#510 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I definitely have some interest. Wife and I intend to use the $20k+ that's now sunk into the Z. We both will be taking some lessons and getting some track time with it. I got fuel starvation on a right hander beating a light with 4-5 dots left. It took about 4-5 miles for the fuel gauge to read correctly again. I'm trying to squash any known issues this car has. Mine is SC'd and using Walboro255LPH already. I'm supposed to be around 500whp, but no numbers as GTM's still finishing things up. phunk and Mr&Mrs like this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel starvation, who else?	Mike	Track / Autocross / Drifting / Dragstrip	556	12-14-2016 04:44 PM
Fuel Starvation Problem Solved?	ResIpsa	Track / Autocross / Drifting / Dragstrip	7	03-01-2012 06:50 PM
Fuel Starvation. It finally happened to me.	houkouonchi	Track / Autocross / Drifting / Dragstrip	15	02-29-2012 11:10 AM
50-75% improved fuel economy news story... 'supercritical fuel inejctors'	travisjb	Engine & Drivetrain	4	05-21-2010 12:54 PM
Fuel Filler Tube Coating Flaking Off Into Fuel Tank	SoCal 370Z	Nissan 370Z General Discussions	12	02-02-2010 11:37 AM