Gear ratios MT vs AT

dpmdc · 04-05-2012, 11:15 AM

Anyone have experience with comparing raios of both transmissions for track use. Our home track has a lot of turns (22 in 3.56 miles) and a few 1800' straights and not much elevation changes. Looking for the best for this application. Road America is our alternate and that has long straights and most of the track is in the higher 2 cogs typically with several steep inclines.

TerribleONE · 04-05-2012, 11:17 AM

Nissan 370Z Official Specs Released from Nissan 11.15.08

dpmdc · 04-05-2012, 11:21 AM

Looking for someone that has seat time on a track.

TerribleONE · 04-05-2012, 11:29 AM

I do have seat time on tracks, but not in your location. You asked for the gear ratios so I provided them to you. I will tell you that if you plan on tracking the car regularly then its 6MT all the way IMO...

dpmdc · 04-05-2012, 11:38 AM

Thanks. I thought maybe with the extra ratio the AT might me more productive with a tighter stack. We use a Hewland FTR in our car so we can make ratios custom per track configurations and elevations.

dpmdc · 04-05-2012, 11:41 AM

Any idea of how many RPM's the manual and AT fall off on an upshift? Assuming you are at or near redline does an upshift keep it in the peak of the powerband?

04-05-2012, 11:15 AM	#1 (permalink)
dpmdc Base Member Join Date: Mar 2012 Location: Chicago suburbs Posts: 48 Drives: Diasio D962R Rep Power: 13	Gear ratios MT vs AT Anyone have experience with comparing raios of both transmissions for track use. Our home track has a lot of turns (22 in 3.56 miles) and a few 1800' straights and not much elevation changes. Looking for the best for this application. Road America is our alternate and that has long straights and most of the track is in the higher 2 cogs typically with several steep inclines.

04-05-2012, 11:17 AM	#2 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Nissan 370Z Official Specs Released from Nissan 11.15.08 __________________ 638WHP 541WTQ @ 13.5PSI Build thread

04-05-2012, 11:29 AM	#4 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	I do have seat time on tracks, but not in your location. You asked for the gear ratios so I provided them to you. I will tell you that if you plan on tracking the car regularly then its 6MT all the way IMO... __________________ 638WHP 541WTQ @ 13.5PSI Build thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6th gear	Vegasboricua	Nissan 370Z General Discussions	32	04-11-2013 06:26 PM
Can't get in first gear	tonybui	Engine & Drivetrain	7	12-09-2011 11:39 AM
Top Gear Z vs Z4	UNKNOWN_370	Nissan 370Z General Discussions	95	05-25-2011 10:41 PM
Higher gear ratios	Zeto	Engine & Drivetrain	8	07-09-2010 09:37 AM
Lag from 2nd to 3rd gear	G37sHKS	Engine & Drivetrain	2	02-20-2010 11:17 PM

04-05-2012, 11:21 AM	#3 (permalink)
dpmdc Base Member Join Date: Mar 2012 Location: Chicago suburbs Posts: 48 Drives: Diasio D962R Rep Power: 13	Looking for someone that has seat time on a track.

04-05-2012, 11:38 AM	#5 (permalink)
dpmdc Base Member Join Date: Mar 2012 Location: Chicago suburbs Posts: 48 Drives: Diasio D962R Rep Power: 13	Thanks. I thought maybe with the extra ratio the AT might me more productive with a tighter stack. We use a Hewland FTR in our car so we can make ratios custom per track configurations and elevations.

04-05-2012, 11:41 AM	#6 (permalink)
dpmdc Base Member Join Date: Mar 2012 Location: Chicago suburbs Posts: 48 Drives: Diasio D962R Rep Power: 13	Any idea of how many RPM's the manual and AT fall off on an upshift? Assuming you are at or near redline does an upshift keep it in the peak of the powerband?