Nissan 370Z Forum  

Traction control

Taking delivery tomorrow of my Nismo 370z and I am concerned about this traction control issue, Dealership confirms that with VDC turned off tires will spin freely with no electronic

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Track / Autocross / Drifting / Dragstrip


Reply
 
LinkBack Thread Tools Display Modes
Old 02-29-2012, 04:30 PM   #1 (permalink)
Base Member
 
Join Date: Feb 2012
Location: Wilmington
Posts: 7
Drives: 2010 Nismo Z
Rep Power: 13
SpeedFreak007 is on a distinguished road
Default Traction control

Taking delivery tomorrow of my Nismo 370z and I am concerned about this traction control issue, Dealership confirms that with VDC turned off tires will spin freely with no electronic intervention of any kind. Forum Discussion seem alittle confusing on this subject. Is it that some people are trying to powerbrake and burnout? or are you reving the engine popping the clutch and power is cutting out when wheels start to spin? Does anyone with this car have a clearcut answer?
SpeedFreak007 is offline   Reply With Quote
Old 02-29-2012, 04:34 PM   #2 (permalink)
A True Z Fanatic
 
TerribleONE's Avatar
 
Join Date: Jan 2009
Location: Socal
Posts: 10,203
Drives: WOT
Rep Power: 5850
TerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond repute
Default

When you turn VDC off it is all the way off... And of course with it on it will cut power with it on
__________________
638WHP 541WTQ @ 13.5PSI
Build thread
TerribleONE is offline   Reply With Quote
Old 02-29-2012, 04:36 PM   #3 (permalink)
A True Z Fanatic
 
m4a1mustang's Avatar
 
Join Date: Feb 2009
Location: Northern VA
Posts: 55,385
Drives: on two wheels
Rep Power: 6962
m4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond repute
Default

If you have the brake and throttle on simultaneously the car will cut power unless you pull the brake fuse. Keep in mind your tail lights won't work when you do this.
__________________
- Steve
MAZOC Meet Thread
Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!)
LIKE us on Facebook!
m4a1mustang is offline   Reply With Quote
Old 02-29-2012, 04:37 PM   #4 (permalink)
Base Member
 
Join Date: Feb 2012
Location: Wilmington
Posts: 7
Drives: 2010 Nismo Z
Rep Power: 13
SpeedFreak007 is on a distinguished road
Default

Thanks for replying, Thats what i thought, do you know What the heck everyone else talking about?
SpeedFreak007 is offline   Reply With Quote
Old 02-29-2012, 04:38 PM   #5 (permalink)
Base Member
 
Join Date: Feb 2012
Location: Wilmington
Posts: 7
Drives: 2010 Nismo Z
Rep Power: 13
SpeedFreak007 is on a distinguished road
Default

Ok so there are powerbraking while there trying to spin?
SpeedFreak007 is offline   Reply With Quote
Old 02-29-2012, 04:39 PM   #6 (permalink)
A True Z Fanatic
 
Red__Zed's Avatar
 
Join Date: Jul 2010
Location: window seat
Posts: 28,940
Drives: Mostly on two wheels
Rep Power: 120
Red__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond repute
Default

The brake/throttle interlock stays on, as does ABS/ABLS.
Red__Zed is offline   Reply With Quote
Old 02-29-2012, 04:40 PM   #7 (permalink)
A True Z Fanatic
 
m4a1mustang's Avatar
 
Join Date: Feb 2009
Location: Northern VA
Posts: 55,385
Drives: on two wheels
Rep Power: 6962
m4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond reputem4a1mustang has a reputation beyond repute
Default

Quote:
Originally Posted by SpeedFreak007 View Post
Ok so there are powerbraking while there trying to spin?
Yeah. Basically you can't do a traditional burnout where you'd use some brake to stay in place without pulling the fuse. 7AT guys also need to pull it so they can stall the torque converter for a better launch at the drag strip.
__________________
- Steve
MAZOC Meet Thread
Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!)
LIKE us on Facebook!
m4a1mustang is offline   Reply With Quote
Old 02-29-2012, 04:42 PM   #8 (permalink)
A True Z Fanatic
 
Red__Zed's Avatar
 
Join Date: Jul 2010
Location: window seat
Posts: 28,940
Drives: Mostly on two wheels
Rep Power: 120
Red__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond reputeRed__Zed has a reputation beyond repute
Default

Quote:
Originally Posted by SpeedFreak007 View Post
Thanks for replying, Thats what i thought, do you know What the heck everyone else talking about?
Some people may be talking about the ABLS, which basically uses the brakes to function as a limited slip
Red__Zed is offline   Reply With Quote
Old 02-29-2012, 04:47 PM   #9 (permalink)
Base Member
 
Join Date: Feb 2012
Location: Wilmington
Posts: 7
Drives: 2010 Nismo Z
Rep Power: 13
SpeedFreak007 is on a distinguished road
Default

M4a1 thank you for the helpful information!!
SpeedFreak007 is offline   Reply With Quote
Old 03-05-2012, 10:10 PM   #10 (permalink)
Base Member
 
Join Date: May 2011
Location: USA
Posts: 140
Drives: 370Z
Rep Power: 14
_ace_ is on a distinguished road
Default

Just what Red_Zed said:
Even with VDC off, on a sustained burnout the car will pulse the brakes to get the power down. It also intervenes to get you moving if you're doing near-donut level slides with the go-pedal down.
_ace_ is offline   Reply With Quote
Old 11-29-2013, 04:18 PM   #11 (permalink)
Z&I
Enthusiast Member
 
Z&I's Avatar
 
Join Date: Feb 2013
Location: New Jersey
Posts: 410
Drives: '09 370z 6MT FI
Rep Power: 12
Z&I is a jewel in the roughZ&I is a jewel in the roughZ&I is a jewel in the roughZ&I is a jewel in the rough
Default

Quote:
Originally Posted by m4a1mustang View Post
If you have the brake and throttle on simultaneously the car will cut power unless you pull the brake fuse. Keep in mind your tail lights won't work when you do this.
Trying to set up my car for the 1/4 mile track...
I want to disable the rear wheels from pulse braking so that I can do a correct burn out.

Where is this brake fuse located ?
I'm understanding from this post that the ABLS (ABS too?) for the rear wheels (only) will be disabled but the brake lights won't work.
Also is there a separate fuse for the VDC ?

Installed the GTM Race Logic Traction Control (digital) and the VDC overrides it and the Race Logic defaults to '0' slip.

So at each start up I have to turn off the VDC and then reset the Race Logic again...sort of a little bit of a pita.

Thanks,
Bob
Z&I is offline   Reply With Quote
Old 11-29-2013, 05:33 PM   #12 (permalink)
Banned
 
Join Date: Feb 2011
Location: monticello new york 127
Posts: 1,095
Drives: 08 350z black 6m/t
Rep Power: 0
andre12031948 has a spectacular aura aboutandre12031948 has a spectacular aura aboutandre12031948 has a spectacular aura about
Default I turn VDC off when

I'm at the track or want to accelerate quickly, or when I'm in snow or loose ground & I want power in both wheels without slippage.

I DON'T touch fuses...
andre12031948 is offline   Reply With Quote
Old 11-29-2013, 05:39 PM   #13 (permalink)
Banned
 
Join Date: Feb 2011
Location: monticello new york 127
Posts: 1,095
Drives: 08 350z black 6m/t
Rep Power: 0
andre12031948 has a spectacular aura aboutandre12031948 has a spectacular aura aboutandre12031948 has a spectacular aura about
Default

Quote:
Originally Posted by Z&I View Post
Trying to set up my car for the 1/4 mile track...
I want to disable the rear wheels from pulse braking so that I can do a correct burn out.

Where is this brake fuse located ?
I'm understanding from this post that the ABLS (ABS too?) for the rear wheels (only) will be disabled but the brake lights won't work.
Also is there a separate fuse for the VDC ?

Installed the GTM Race Logic Traction Control (digital) and the VDC overrides it and the Race Logic defaults to '0' slip.

So at each start up I have to turn off the VDC and then reset the Race Logic again...sort of a little bit of a pita.

Thanks,
Bob
Sorry but I don't understand getting traction control for a car that has traction control from the factory. Post a bit confusing.
andre12031948 is offline   Reply With Quote
Old 11-29-2013, 11:05 PM   #14 (permalink)
Z&I
Enthusiast Member
 
Z&I's Avatar
 
Join Date: Feb 2013
Location: New Jersey
Posts: 410
Drives: '09 370z 6MT FI
Rep Power: 12
Z&I is a jewel in the roughZ&I is a jewel in the roughZ&I is a jewel in the roughZ&I is a jewel in the rough
Default

Quote:
Originally Posted by andre12031948 View Post
Sorry but I don't understand getting traction control for a car that has traction control from the factory. Post a bit confusing.
Hey Andre ... good to hear from you!
Hope you had a great Thanksgiving Day.

The factory VDC isn't flexible, nor is it adjustable ... I've hated it from day 1.

Really bogs the car down with it on - and it takes a long time to recover if you've pushed it somewhat past it's comfort zone.

The Race Logic TC has a lot of room for adjustment and it is adjustable on the fly.

You can set the allowable slippage in 1% increments before it kicks in.
It allows you to dial in your car to utilize the maximum available traction.

It works by cutting the injectors in a programmed pattern...and the car recovers immediately.

All you feel is a little miss when it engages so you know it's on the job - and since it doesn't drastically starve the motor for fuel there is no bog.

Did a few test launches today @ 3000 ~ 3500 rpm & from 9% ~ 12% slippage - straight as an arrow and no wheel hop...even with the temp in the mid 30's.

Was able to do a manly shift into 2nd - still straight and it still hooked good.

Did a few short burst accelerations last night in the rain as well.
Work'em Good.

I'm all for technology when it works.

Looking for good weather on Sunday - but the forecast is for showers.
Would like to make it to the track to put it to the final test!

Hope this clarifies my post... IMHO - The Race Logic is superior to the factory VDC in every way when it comes to driving it like it was meant to drive.

Lotus, Aston Martin, and Koenigsegg (I believe) all use this system.

Bob
Z&I is offline   Reply With Quote
Old 11-30-2013, 12:11 AM   #15 (permalink)
Track Member
 
GSS138's Avatar
 
Join Date: Mar 2013
Location: Mission Viejo, CA
Posts: 769
Drives: '12 370Z 6M Sport
Rep Power: 13
GSS138 is a jewel in the roughGSS138 is a jewel in the roughGSS138 is a jewel in the rough
Default

Quote:
Originally Posted by _ace_ View Post
Just what Red_Zed said:
Even with VDC off, on a sustained burnout the car will pulse the brakes to get the power down. It also intervenes to get you moving if you're doing near-donut level slides with the go-pedal down.
Do you mean the loud pedal?
__________________
Current Mods: Vorpal Weapon +5.
GSS138 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Traction Control joe370z Australia/New Zealand 23 02-28-2021 08:27 PM
GTM Traction Control NA Z eliminator Forced Induction 44 01-04-2012 07:22 PM
traction control? RedNismoZ Nismo 370Z 10 12-30-2011 04:11 PM
Traction control bigZ Nissan 370Z General Discussions 21 03-10-2011 12:17 AM
Traction Control ZSPEED Nissan 370Z General Discussions 10 06-03-2009 06:34 PM


All times are GMT -5. The time now is 11:15 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2