GoPro HD Motorsports camera and track days

SeattleLion

My wife just gave me a GoPro Motorsports HD camera for our anniversary. It looks like it could be a lot of fun for my next track day. Has anyone used one of these? Where did you mount it? How did you like what you got?

JB1

Official GO PRO HD 370Z Owners Thread:Mounting Tips, tricks, Pictures, Videos Inside

__________________
Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //

djpathfinder

AK's thread is a good one.

I've got one too. You can pretty much mount it anywhere you can think. Watch out if you mount on your the upper portion of your windshield and in case it rains...obviously (after it happened to me) it will interfere with your wipers. For inside shots, I mounted on the rear hatch window. In AK's thread, he has mounted at the bottom of the rear bumper to show the under side of the car, which is cool.

There's a lot of wind noise at speed, but I placed a thin piece of foam between the camera and door of the case, and that reduced it slightly...wind noise is still there though. Here's a sample with the camera attached to the passenger side B pillar:
YouTube - ‪370Z Stratotech Time Attack 4 - Aug 30, 2010‬‏

You see these everywhere in drifting, car racing, sports, etc. Have fun with your GoPro.

__________________
2012 GT-R Black Edition Jet Black
2010 370Z 40th Anniversary // SOLD

cossie1600

Great job on your camera mount btw, the only concern I have is safety. Is it really safe to have a cross metal bar behind your headrest like that, would it stab you in the neck should it snap in a T bone accident?

Also I highly recommend capturing your hands for your track shot, the other shots are virtually useless if you want to improve your driving as it doesnt really tell you much.

Cmike2780

I got a GoPro a couple of days ago. Here's my first vid.



I notice this high pitched noise when I play it back...almost " tinny" when it gets loud. For those of you who own one, is this normal? Or is my camera defective?

__________________

[09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R]

djpathfinder

Are you addressing me? For the video from outside the passenger window the camera was mounted on the OUTSIDE of the car (B pillar) by supplied suction cup...no homemade crossbar used The suction cup makes this thing excellent for motorsports as you can mount it on any smooth surface and it's strong.

My favorit mounting position for learning is to have the camera mounted on the inside of the rear window so that you can see out the windshield, hands, steering wheel and shifter. Plus, no wind noise so you can listen to the beautiful engine and exhaust music!

__________________
2012 GT-R Black Edition Jet Black
2010 370Z 40th Anniversary // SOLD

cossie1600

No, to the OP as he had made a custom mount.

ChrisSlicks

Normal. It is the automatic gain control trying to prevent distortion my lowering the mic gain. Tends to roll off the low frequencies in the process.

__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms

JB1

OP, Check this for an interesting camera mount, on the side of the helmet:

Autobahn CC full course with MVP

__________________
Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //