A.M. Performance Extra Capacity Baffled Racing Oil Pans

ChrisSlicks · 05-09-2013, 05:26 PM

Quote:

Originally Posted by wstar

Oh! I thought they still only had one that fit the 35DE/HR engines, or did it end up being the same part? In any case, good find. Maybe I'll do that and a pre-emptive water pump replacement next time I have a chance to dig that deep on the car, maybe later this year.

It's in the Nissan Motorsports catalog listed as "new" and is for the VQ37VHR. Whether it's actually the same part or not I'm not sure.

Yes I was planning on doing the water pump at the same time "since I'm in there" but really don't have any desire to be in there any time soon

In other words I want the results but don't want to do the work.

Sh0velMan · 05-09-2013, 08:04 PM

Quote:

Originally Posted by ChrisSlicks

It's in the Nissan Motorsports catalog listed as "new" and is for the VQ37VHR. Whether it's actually the same part or not I'm not sure.

Yes I was planning on doing the water pump at the same time "since I'm in there" but really don't have any desire to be in there any time soon

In other words I want the results but don't want to do the work.

Is there any kind of upgraded water pump, or are we talking about just putting in a new OEM pump for the fresh seals and whatnot?

FAstGreg · 05-10-2013, 02:48 AM

Quote:

Originally Posted by Nixlimited

GTM is now selling a baffled high-capacity oil pan. Check it out.

Any links, picture or price ? Interesting to know if N/A version will be available, thanks

wstar · 05-10-2013, 07:00 AM

Quote:

Originally Posted by Sh0velMan

Is there any kind of upgraded water pump, or are we talking about just putting in a new OEM pump for the fresh seals and whatnot?

That's all I was talking about: just refresh everything before it goes bad instead of waiting for failure. I doubt there's a true "upgrade" available, but it's possible once you dig around that there are multiple manufacturers of replacement pumps, and some are better quality than others. A somewhat-related example: instead of going to direct to Nissan, you can get wheel hubs (front and rear) from a couple of different aftermarket bearing/hub mfgs of varying quality and durability...

ChrisSlicks · 05-10-2013, 07:59 AM

Quote:

Originally Posted by wstar

That's all I was talking about: just refresh everything before it goes bad instead of waiting for failure. I doubt there's a true "upgrade" available, but it's possible once you dig around that there are multiple manufacturers of replacement pumps, and some are better quality than others. A somewhat-related example: instead of going to direct to Nissan, you can get wheel hubs (front and rear) from a couple of different aftermarket bearing/hub mfgs of varying quality and durability...

Right, no upgrade on the water pump that I'm aware of. They seem to hold up fairly well and failure isn't catastrophic like it is with the oil pump.

Any opinion on the various hub manufacturers? I ended up ordering my new hubs through Nissan since the price was the same, not sure who's Nissan contract parts supplier is.

wstar · 05-11-2013, 02:49 AM

Timken's supposed to be pretty damn good, and (as of recently) they make both front and rear hubs for our car. I think Moog does at least the rears, maybe front too, but I suspect Timken's better. You can look up the Timken hubs here: http://www.showmetheparts.com/timken/

ChrisSlicks · 05-11-2013, 08:09 AM

Yeah, I've been using Timken for years without issue on other vehicles, also saw that Beck/Arnley is making hubs but they are more budget line I think. I wouldn't be surprised if these hubs Nissan sent are actually Timken, but I couldn't find any identifying marks.

I've only heard one complaint from a owner about Timken, and that was with a 25 year old Corvette running race tires. She said that the Timken's started out good for her but then they hadn't been holding up in recent years. That is just one part out of millions though.

L33T Z34 · 07-16-2013, 11:57 PM

Quote:

Originally Posted by wstar

Oh! I thought they still only had one that fit the 35DE/HR engines, or did it end up being the same part? In any case, good find. Maybe I'll do that and a pre-emptive water pump replacement next time I have a chance to dig that deep on the car, maybe later this year.

The 350Z (vq35hr) and 370Z (vq37vhr) have the same OEM oil pump assy, part number: 15010-JK20D. After reading a few threads on here about catastrophic engine failure due to revving to 8k+ RPM, I will definitely upgrade to the NISMO oil pump assy, 15010-RRZ3C1.

SPOHN · 07-17-2013, 06:53 AM

Not sure why you would want to rev that high? There is no extra power being made that high in the revs.

ChrisSlicks · 07-17-2013, 07:29 AM

Quote:

Originally Posted by SPOHN

Not sure why you would want to rev that high? There is no extra power being made that high in the revs.

With the right mods you can be making good power all the way to 8k. To come out ahead you simply need to be making more power up top than you would at your usual RPM return point, i.e. if you make more power at 8k than at 5.5k then you have more power under the curve and your new return point would be 6k.

SPOHN · 07-17-2013, 08:40 AM

Quote:

Originally Posted by ChrisSlicks

With the right mods you can be making good power all the way to 8k. To come out ahead you simply need to be making more power up top than you would at your usual RPM return point, i.e. if you make more power at 8k than at 5.5k then you have more power under the curve and your new return point would be 6k.

That's true. But in order to make more power in that range will require cams.

SS_Firehawk · 07-17-2013, 08:58 AM

Or new IM with shorter runners and tuned headers for that rpm range, or an centi SC that has room to spin a bit more.

Sh0velMan · 07-17-2013, 09:03 AM

Quote:

Originally Posted by SS_Firehawk

Or new IM with shorter runners and tuned headers for that rpm range, or an centi SC that has room to spin a bit more.

Pretty sure the stock one is tuned to like 9K RPM or something ridiculous.

It's cam timing and head flow that limit the top end on these cars.

And Chris (Spohn) all you have to do is make more power @ 8K than you do @ 5.5K and you automatically win.

Almost everyone makes more power @ 8K than 5.5K, even with zero mods (other than raising the limiter).

Shamu · 07-21-2013, 11:47 PM

Quote:

Originally Posted by SPOHN

That's true. But in order to make more power in that range will require cams.

While agree that we need more exhaust cam I may have some data that disputes lack of ability to make power above 7500 rpm with stock cams. And our cars with 4.09 rear end benefit greatly from higher redline. Not to mention shifting into even higher power band when you go into next gear. Unless you invest in close ratio tranny gears having higher rpm redline helps with our Grand Canyon tranny gearing.. Short shifting sucks with our stock gearbox.

chrischhorn · 07-22-2013, 12:37 AM

Quote:

Originally Posted by SPOHN

That's true. But in order to make more power in that range will require cams.

ummmmm.....my max power is made at 8k.....

05-11-2013, 02:49 AM	#171 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Timken's supposed to be pretty damn good, and (as of recently) they make both front and rear hubs for our car. I think Moog does at least the rears, maybe front too, but I suspect Timken's better. You can look up the Timken hubs here: http://www.showmetheparts.com/timken/ __________________ 7AT Track Car! Journal thread / Car setup details

05-11-2013, 08:09 AM	#172 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	Yeah, I've been using Timken for years without issue on other vehicles, also saw that Beck/Arnley is making hubs but they are more budget line I think. I wouldn't be surprised if these hubs Nissan sent are actually Timken, but I couldn't find any identifying marks. I've only heard one complaint from a owner about Timken, and that was with a 25 year old Corvette running race tires. She said that the Timken's started out good for her but then they hadn't been holding up in recent years. That is just one part out of millions though. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

07-17-2013, 06:53 AM	#174 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Not sure why you would want to rev that high? There is no extra power being made that high in the revs. __________________

07-17-2013, 08:58 AM	#177 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Or new IM with shorter runners and tuned headers for that rpm range, or an centi SC that has room to spin a bit more. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance - Racing Brake Line Package: 370z / G37	Tray@Forged	Suspension/Brakes	116	04-19-2012 01:07 PM
BC Racing Coils ON SALE NOW! @ Imported Performance	Imported Performance	Suspension/Brakes	122	11-21-2011 07:38 PM
Baffled: Rear Tires	Nismoracer	Nismo 370Z	5	11-21-2010 02:04 AM
T.k.f. Racing high performance service center.	tkfracing	Nissan 370Z General Discussions	36	10-10-2010 04:35 PM
Moroso Oil Pans	davidyan	Engine & Drivetrain	15	08-23-2009 06:56 PM