official 1/4 mile track times

YYZ · 11-20-2017, 08:52 PM

Quote:

Originally Posted by SG4247

Went back to the track yesterday. Last day the track is open here in 2017. Perfect racing weather.

Very Cool air - high temp of 60F today in the central USA! Dry air too!

DA = 800-1000 ft (this rarely happens here in OK)

2010 Touring 7AT
Mods are:
Empty trunk - 3470 lbs with driver (helps a lot)
Enkei 18 x 10.5 rear wheels w/ MT ET Str SS 285 tires @ 30 psi (helps a lot)
Z1 intake tubes (Waste of $$)
K&N panel filters (Waste of $$)
48 row cooler (ET penalty due to weight)
Mobile 1 10-30w oil (helps a little)
DIY ported upper and lower intake (helps a little)
Ebay test pipes (Manzo) (helps a little)
Ackrapovich CBE (helps a little)
Pulled brake fuse (helps a little)
No yaw or traction control (helps a lot)
4 gal of 91 Octane gas from Conoco (seems to work)
Compact spare front wheels with MT 26x6x18 Sportsman (saves 30lbs off the nose)
NO TUNE
13.193 @ 105.14mph 2.028 60'
WOW what a difference the weather makes!

I think you might have a 12 second car if you can get a better short time and a tune.

jchammond · 12-03-2017, 06:42 PM

I see 110 pages on this thread; Is there any particular page with an updated list?
I seen the list on page 1,,,look's like it hasn't been updated in a year or 2?

SG4247 · 12-03-2017, 07:15 PM

That would be really cool to have it updated.

Looks like tranceformer hasnt been on since early 2016.

jchammond · 12-03-2017, 07:53 PM

Quote:

Originally Posted by SG4247

That would be really cool to have it updated.

Looks like tranceformer hasnt been on since early 2016.

March 29/2015’ I made this pass w/K&N drop in’s only...the filters knocked me out of the stock class.

Hope to be going back next week w/40+ more whp & different gears.

Sent from my iPhone using Tapatalk

SG4247 · 12-03-2017, 09:27 PM

Let er rip!

Looking forward to your report!

jchammond · 12-04-2017, 03:03 AM

Quote:

Originally Posted by SG4247

Let er rip!

Looking forward to your report!

I'd like to shave at least 1/2 sec. off; though my wheel/tires aren't optimal for best times.
I just want to see how it runs as is vs. the base wheel's & then looking to get a lighter set of wheels/tires for the dragstrip only.

Spoiler · 12-04-2017, 08:49 PM

Quote:

Originally Posted by jchammond

I'd like to shave at least 1/2 sec. off; though my wheel/tires aren't optimal for best times.
I just want to see how it runs as is vs. the base wheel's & then looking to get a lighter set of wheels/tires for the dragstrip only.

Looking forward to seeing this happen.

aireoh · 01-04-2018, 11:00 PM

https://youtu.be/GdmYtSNgYZs

12.6650 E/T
1.9087 60ft
110.27 MPH

Looking to hopefully break 12.6 after setting my personal best a year ago.
I set this time with just 3” intakes, test pipes, tomei CBE and a bad *** tune by RZG.
This is what my build looks like now.

Stillen Lighweight Crank Pulley
JWT Cams
Z1 Motorsports ported intake manifold
Custom 3" Dual Intakes
PCV Delete with catch can
Z1 Motorsport headers
Z1 Test Pipes
600cc Bosch Injectors
240lph Walbro Fuel Pump
Nismo Pilot Bearing
Lightweight Spec Flywheel
Stage 2 Spec Twin Disc Clutch
Zspeed Clutch Slave Cylinder
3” Y-pipe
Tomei Catback Exhaust
Sport VLSD
BC Racing Coilovers
Z1 Motorsports Rear Camber Arms
SPC Toe Bolts
19” Sport Rays
Seibon CF hood
E85 Compatible
Solid differential bushings
High Capacity Diff Cover
Braum Racing Seats

SG4247 · 01-05-2018, 09:06 AM

Thats awesome!

What tires did you use for these runs?

Was the car on E85 for the day, did you dyno these mods?

aireoh · 01-06-2018, 03:48 AM

Quote:

Originally Posted by SG4247

Thats awesome!

What tires did you use for these runs?

Was the car on E85 for the day, did you dyno these mods?

The tires used were Mickey Thompson E/T street radials on 300zx rims!
The car dynod at 308hp with these mods a few weeks after this was ran.
And negative, 93 Octane was used.

jchammond · 01-06-2018, 04:05 AM

Quote:

Originally Posted by aireoh

The tires used were Mickey Thompson E/T street radials on 300zx rims!
The car dynod at 308hp with these mods a few weeks after this was ran.
And negative, 93 Octane was used.

Do you have the 1st or 2nd grind cam now?

aireoh · 01-06-2018, 06:55 AM

Quote:

Originally Posted by jchammond

Do you have the 1st or 2nd grind cam now?

i have the first set of cams JWT came out with.
i don't think the C2 cams are out to the general public yet?

SG4247 · 01-06-2018, 10:02 AM

Interesting, would have thought it would make more power than that based on your 1/4 mile time.

But, that may have been a stingy dyno too...

aireoh · 01-06-2018, 04:17 PM

Quote:

Originally Posted by SG4247

Interesting, would have thought it would make more power than that based on your 1/4 mile time.

But, that may have been a stingy dyno too...

not at all!
intakes, tear pipes, and CBE usually make around that power?

SG4247 · 01-06-2018, 09:43 PM

Yes, 306 hp is in-line for the mods you had at the time. BUT if your car weighs 3400 lbs and makes 306 WHP - it would normally run about 13.00 sec 1/4 at 104 mph in decent conditions.

BUT, your car actually ran 12.66 @ 3400 lbs at a strong 110 mph which is more like 330 WHP in my opinion (and according to most drag calculators like quarter jr).

So, I think it ran better than expected at the track! Maybe it had a really good driver mod?

Have you dyno'd it since adding the cams, port work, headers, 3" intake etc..?

Should really haul now..

12-03-2017, 06:42 PM	#1637 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	I see 110 pages on this thread; Is there any particular page with an updated list? I seen the list on page 1,,,look's like it hasn't been updated in a year or 2? __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-04-2018, 11:00 PM	#1643 (permalink)
aireoh Base Member Join Date: Jan 2016 Location: Yuma, Arionza Posts: 32 Drives: 2012 370Z Base 6mt Rep Power: 9	https://youtu.be/GdmYtSNgYZs 12.6650 E/T 1.9087 60ft 110.27 MPH Looking to hopefully break 12.6 after setting my personal best a year ago. I set this time with just 3” intakes, test pipes, tomei CBE and a bad *** tune by RZG. This is what my build looks like now. Stillen Lighweight Crank Pulley JWT Cams Z1 Motorsports ported intake manifold Custom 3" Dual Intakes PCV Delete with catch can Z1 Motorsport headers Z1 Test Pipes 600cc Bosch Injectors 240lph Walbro Fuel Pump Nismo Pilot Bearing Lightweight Spec Flywheel Stage 2 Spec Twin Disc Clutch Zspeed Clutch Slave Cylinder 3” Y-pipe Tomei Catback Exhaust Sport VLSD BC Racing Coilovers Z1 Motorsports Rear Camber Arms SPC Toe Bolts 19” Sport Rays Seibon CF hood E85 Compatible Solid differential bushings High Capacity Diff Cover Braum Racing Seats Memphis370Z, jchammond and SG4247 like this. Last edited by aireoh; 01-04-2018 at 11:03 PM. Reason: updated info

01-06-2018, 09:43 PM	#1650 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 785 Drives: 2010 touring Rep Power: 7842	Yes, 306 hp is in-line for the mods you had at the time. BUT if your car weighs 3400 lbs and makes 306 WHP - it would normally run about 13.00 sec 1/4 at 104 mph in decent conditions. BUT, your car actually ran 12.66 @ 3400 lbs at a strong 110 mph which is more like 330 WHP in my opinion (and according to most drag calculators like quarter jr). So, I think it ran better than expected at the track! Maybe it had a really good driver mod? Have you dyno'd it since adding the cams, port work, headers, 3" intake etc..? Should really haul now.. Last edited by SG4247; 01-06-2018 at 09:46 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 370Z 1/4 mile Times thread (Stock, TT, Nitrous, Supercharger, Bolt ons etc)	AK370Z	Track / Autocross / Drifting / Dragstrip	618	08-16-2019 01:56 PM
Official Nürburgring TOP 200 lap times	AK370Z	Track / Autocross / Drifting / Dragstrip	30	04-08-2016 03:12 AM
Comon guys i wanna see some 1/4 mile times with SC and TT kits installed	DON_Apollo	Forced Induction	74	04-24-2011 02:36 AM
My worst track times ever (dragstrip)	Mythic	Track / Autocross / Drifting / Dragstrip	10	09-16-2010 12:49 PM
Los Angeles tracks, track dates, times???	HerZ	Track / Autocross / Drifting / Dragstrip	3	12-31-2009 02:25 AM

12-03-2017, 07:15 PM	#1638 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 785 Drives: 2010 touring Rep Power: 7842	That would be really cool to have it updated. Looks like tranceformer hasnt been on since early 2016.

12-03-2017, 09:27 PM	#1640 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 785 Drives: 2010 touring Rep Power: 7842	Let er rip! Looking forward to your report!

01-05-2018, 09:06 AM	#1644 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 785 Drives: 2010 touring Rep Power: 7842	Thats awesome! What tires did you use for these runs? Was the car on E85 for the day, did you dyno these mods?

01-06-2018, 10:02 AM	#1648 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 785 Drives: 2010 touring Rep Power: 7842	Interesting, would have thought it would make more power than that based on your 1/4 mile time. But, that may have been a stingy dyno too...