Originally Posted by Z eliminator (Post 1170407)

If you had a 7 AT you would not ahve these problems>

June 25 the Z is going to the track. Hopefully with more toys on the car if they ever get dilivered to my house in time.
12.????. and some good weather. This track is faster than the one i ran the 12.42's on

Z

Originally Posted by b1adesofcha0s (Post 1170242)

I'm assuming from your sig that you're an engineer. If so, what kind of engineer are you? I am in chemical engineering :tup:

Originally Posted by Isamu (Post 1170281)

way to stay on topic :gtfo2:
:iagree:

ontopic tho.. it's good to see some of these numbers being put up, especially in the stock category

Originally Posted by b1adesofcha0s (Post 1171723)

I want to head out to the male strip club soon.

Originally Posted by jnaut (Post 1171734)

I will join you at the male strip club:tup:

Originally Posted by b1adesofcha0s (Post 1171745)

I think I will hit the drag strip this Friday night :tup:

Originally Posted by jnaut (Post 1171749)

Get on it mang. Have to done any mods since last time? or still rockin stock?

Originally Posted by b1adesofcha0s (Post 1171751)

Still going to be stock for a while. Hopefully I'll have something by end of summer once I have all the internship money. Either HFC or used CBE if I can find a good deal. :tup:

Originally Posted by jnaut (Post 1171756)

FWIW I have a set FI long tubes and carbon fiber can cat -back and stillen g3's, crank pulley at the shop forsale :driving:

Originally Posted by 2fast4thelaw (Post 1168725)

I don't know how you guys are pulling the numbers you arte posting but up here in Morrison Colorado in the Rockys I am not even close to your numbers.

My Z is mildly modded with Stillen CAT back, HFCs, and CA intake and my best time is 14.8 @ 93.11 mph and my best run was 14.9 @ 99.77 mph.

On my time slip I am car # 152 and the other car I am racing is a 94 Mustang GT that is heavily modified with Drag slicks and I am barely beating him.

The 5300ft elevation must be really robbing my ETA.

Originally Posted by b1adesofcha0s (Post 1170242)

I'm assuming from your sig that you're an engineer. If so, what kind of engineer are you? I am in chemical engineering :tup:

Originally Posted by Z eliminator (Post 1170407)

If you had a 7 AT you would not ahve these problems>

June 25 the Z is going to the track. Hopefully with more toys on the car if they ever get dilivered to my house in time.
12.????. and some good weather. This track is faster than the one i ran the 12.42's on

Z

Originally Posted by jnaut (Post 1171715)

Z the auto problems have to shown yet, as you cant launch it @ 5k rpm like we can. Yours is going to break esp in the higher gears. The nissan manual trans is a tank the clutch/hydrolics are garbage.

Originally Posted by jnaut (Post 1171742)

chuck , also check your clutch master cyl as i have had 2 other customers cars fail.

Originally Posted by 98intrigue (Post 1171750)

I should finally be getting my refund for my MAF sensors and partial tune on Friday. Then I can order the Stillen manifold next week and can finally work on getting my car 100%...THEN I can go to the drag strip...because the itch is killing me.