04-29-2011, 08:12 AM
|
#1 (permalink)
|
|
A True Z Fanatic
Join Date: May 2009
Location: Central Florida
Posts: 1,884
Drives: '12 Corvette GS 6M
Rep Power: 19
|
Quote:
Originally Posted by Mike
something had to be not right with that installation. When properly installed, there would be no force on the centering rings as everything is bolted flush together and there should be no side load on the centering rings. Possibly the ring was too deep and prevented full contact between the wheel and spacer, or something like that? I know when I used type 2 20mm rings on the rear, the original studs were contacting the back of my wheels preventing proper fitment.
|
Mine broke off on my front wheels after like 6 months of normal driving (no autox or tracking). Another user bought a set from someone else where the same thing happened. These were the DRS stud replacement type from H&R.
__________________
Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M
Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT
|
|
|
Similar Threads
Hybrid Mode
