1/8th Mile time

5700lucas · 04-15-2011, 02:49 PM

What do you guys think? I really want to get in the 7's without turbo/supercharger.... Ideas please!!

5700lucas · 04-15-2011, 02:52 PM

Some reation the time slip is not coming up...

Reaction---- .5395
60FT -------1.9433
330FT------ 5.5385
1/8ET-------8.4760
1/8 MPG---- 84.11

m4a1mustang · 04-15-2011, 02:53 PM

Do you have any mods? That's a pretty good 1/8th time!

5700lucas · 04-15-2011, 02:58 PM

umm little mods....test pipe, muffler del, afe stage 3 cai, 75 shot dry nos... thats it! What about pully kit? Headers? I really want 7s bad!!!

m4a1mustang · 04-15-2011, 03:03 PM

Drag radials will get you there.

5700lucas · 04-15-2011, 03:10 PM

That’s what everyone is saying but i already have 295 Nitto Invos on it and traction is not a problem at all!!! Very little spinning off the line! any other ideas??

m4a1mustang · 04-15-2011, 03:25 PM

Quote:

Originally Posted by 5700lucas

That’s what everyone is saying but i already have 295 Nitto Invos on it and traction is not a problem at all!!! Very little spinning off the line! any other ideas??

You are only cutting a 1.94 60' You could easily get it down to the 1.7s on drag radials with a good launch. That would just about put you there.

Kcuba370z · 04-15-2011, 03:26 PM

Drag Radials and a 100 shot

jnaut · 04-15-2011, 09:54 PM

i run 7.90 @ 90.17 all motor. Steve is correct it will take some tires and a lower 60ft to achieve 7.XX on motor. The r/t is irrelevant to e/t in a typical run unless you are in bracket racing.

jnaut · 04-15-2011, 09:58 PM

You only trap 84 with a 75 shot?? sorry but i dont like invo's that much as I cut 1.81 on my re-11's.

Install 4.08 gears/ flywheel and a tune will bring you close if not there

B.A.Q · 04-16-2011, 05:03 AM

5700lucas

that's a really good 1/8 . I'm not really familiar with NOS but what's your best 1/4 ?

Jnaut

have you ever put your car on a dyno because your time is the best time I know for a non-turbo/SC.

I have a bad 60 ft because of my tires, didn't go below 2.3 yet and got 13.4 ( 13 after the correction)

and how faster did your car get after the 4.08 gear and the flywheel ?

Z eliminator · 04-16-2011, 06:06 AM

My 1/8 is 8.185 @ 89.24 with 1.869 60 ft times and mines a 7 AT.
bolts ons and there is more speed in it.

5700lucas · 04-16-2011, 08:43 AM

z-eliminator

What bolt ons are you talking about? Mine is a 7 auto as well!

I have never Dyno the car sorry.

jnaut · 04-16-2011, 09:03 AM

Quote:

Originally Posted by B.A.Q

5700lucas

that's a really good 1/8 . I'm not really familiar with NOS but what's your best 1/4 ?

Jnaut

have you ever put your car on a dyno because your time is the best time I know for a non-turbo/SC.

I have a bad 60 ft because of my tires, didn't go below 2.3 yet and got 13.4 ( 13 after the correction)

and how faster did your car get after the 4.08 gear and the flywheel ?

dynoed 319 @ 8k on a mustang dyno. as for the gears/flywheel...its a whole different car.

Z eliminator · 04-16-2011, 01:08 PM

every possible bolt on. cats, CBE G3 intake , pulley, motordyne maifold, and 4.08 gears with GTM converter.
last dnyo it made 309 SAE RWHP on a dyno jet

04-15-2011, 02:49 PM	#1 (permalink)
5700lucas Base Member Join Date: Sep 2010 Location: Denton Posts: 15 Drives: 2009 Nissan 370Z Rep Power: 15	1/8th Mile time What do you guys think? I really want to get in the 7's without turbo/supercharger.... Ideas please!!

04-15-2011, 02:53 PM	#3 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Do you have any mods? That's a pretty good 1/8th time! __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

04-15-2011, 03:03 PM	#5 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Drag radials will get you there. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

04-15-2011, 09:54 PM	#9 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	i run 7.90 @ 90.17 all motor. Steve is correct it will take some tires and a lower 60ft to achieve 7.XX on motor. The r/t is irrelevant to e/t in a typical run unless you are in bracket racing. __________________ Best 1/4 mile 12.24 Best mph 114.5_______

04-15-2011, 09:58 PM	#10 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	You only trap 84 with a 75 shot?? sorry but i dont like invo's that much as I cut 1.81 on my re-11's. Install 4.08 gears/ flywheel and a tune will bring you close if not there __________________ Best 1/4 mile 12.24 Best mph 114.5_______

04-15-2011, 02:52 PM	#2 (permalink)
5700lucas Base Member Join Date: Sep 2010 Location: Denton Posts: 15 Drives: 2009 Nissan 370Z Rep Power: 15	Some reation the time slip is not coming up... Reaction---- .5395 60FT -------1.9433 330FT------ 5.5385 1/8ET-------8.4760 1/8 MPG---- 84.11

04-15-2011, 02:58 PM	#4 (permalink)
5700lucas Base Member Join Date: Sep 2010 Location: Denton Posts: 15 Drives: 2009 Nissan 370Z Rep Power: 15	umm little mods....test pipe, muffler del, afe stage 3 cai, 75 shot dry nos... thats it! What about pully kit? Headers? I really want 7s bad!!!

04-15-2011, 03:10 PM	#6 (permalink)
5700lucas Base Member Join Date: Sep 2010 Location: Denton Posts: 15 Drives: 2009 Nissan 370Z Rep Power: 15	That’s what everyone is saying but i already have 295 Nitto Invos on it and traction is not a problem at all!!! Very little spinning off the line! any other ideas??

04-15-2011, 03:26 PM	#8 (permalink)
Kcuba370z Enthusiast Member Join Date: Aug 2010 Location: New York Posts: 340 Drives: Z34 Rep Power: 15	Drag Radials and a 100 shot

04-16-2011, 05:03 AM	#11 (permalink)
B.A.Q Enthusiast Member Join Date: Feb 2011 Location: Phoenix,Az Posts: 302 Drives: Touring 370z Rep Power: 14	5700lucas that's a really good 1/8 . I'm not really familiar with NOS but what's your best 1/4 ? Jnaut have you ever put your car on a dyno because your time is the best time I know for a non-turbo/SC. I have a bad 60 ft because of my tires, didn't go below 2.3 yet and got 13.4 ( 13 after the correction) and how faster did your car get after the 4.08 gear and the flywheel ? __________________ SOLD!! 09 370z Touring MT: GReddy Ti-C CBE - Berk HFC - Stillen 3G CAI '11 Mustang GT/CS 5.0 MT

04-16-2011, 06:06 AM	#12 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	My 1/8 is 8.185 @ 89.24 with 1.869 60 ft times and mines a 7 AT. bolts ons and there is more speed in it. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

04-16-2011, 08:43 AM	#13 (permalink)
5700lucas Base Member Join Date: Sep 2010 Location: Denton Posts: 15 Drives: 2009 Nissan 370Z Rep Power: 15	z-eliminator What bolt ons are you talking about? Mine is a 7 auto as well! I have never Dyno the car sorry.

04-16-2011, 01:08 PM	#15 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	every possible bolt on. cats, CBE G3 intake , pulley, motordyne maifold, and 4.08 gears with GTM converter. last dnyo it made 309 SAE RWHP on a dyno jet __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
first time poster, long time reader	gvd	Introduction	5	06-30-2010 03:14 PM
Does anyone's transmission clunk from time to time when pushing the clutch in??	chitown1863	Engine & Drivetrain	21	04-13-2010 09:22 AM
Reaction Time has no impact on Elapsed Time	m4a1mustang	Track / Autocross / Drifting / Dragstrip	2	04-05-2010 09:16 PM
Long time Lurker...first time poster	cuzzinz	New Forum Member	5	01-26-2010 02:24 PM
New 1/4 mile time...	ZforMe	Track / Autocross / Drifting / Dragstrip	19	06-03-2009 12:20 AM