Ran 12's My First Time Ever at a Drag Strip - Stock

Thomasd · 03-13-2011, 03:09 AM

Great times! Was there a tail wind?

brian0128 · 03-13-2011, 10:16 AM

Congrats Shahid! It was perfect weather out yesterday and everyone was amazed how well his car launched at the track. I was impressed with the 60ft times especially since it was his first time at the track! For comparison, I ran my Z too which is a 6 speed with Gen3 intakes and I was only able to run a 13.2 @ 106.5mph with a 1.9 60ft time. I did hit the limiter and went through the traps in 3rd instead of 4th but that would have at best given me just a tenth I think. Shahid's car is quick for a factory car and there was no tire pressure adjustment or weight reduction. We got off Rt. 95 North after driving for a few hours with the Mid Atlantic Group, he paid his fee, got right in line, received a 1 minute brief on the staging points(total time from entering gate to his run was less than 5 minutes) and he ran a great time!

brian0128 · 03-13-2011, 10:34 AM

I took a look at my time slip and compared the times to see where his car was faster than mine. We were dead even to the 330ft mark but his car is really strong between the 330 and the 1/8th mile. My 1/8 time was 8.580 @ 82.65mph. I had what I felt was a great run except for hitting the limiter at the top of 3rd but he had me by quite a bit at the 8th mile which was before that happened.

I can't wait to see what happens if he lets some air out of the tires and runs with a cool engine.

Juruki · 03-14-2011, 11:32 AM

doesnt the 7AT redline every gear if you leave it in full auto? Whats better if you use paddle shifters?

cheshirecat · 03-14-2011, 11:49 AM

Quote:

Originally Posted by jnaut

SwEET!!!! Really whish i ran my car stock....Who has a stock z 6spd they will let be drive????

Haha, I may be able to help you out.

b1adesofcha0s · 03-14-2011, 11:56 AM

Quote:

Originally Posted by Juruki

doesnt the 7AT redline every gear if you leave it in full auto? Whats better if you use paddle shifters?

Not too sure about the redline. The ECU adjusts to how your driving and I think It adjusts the shift points for full auto mode based on that. I've seen it shift around 3k rpm under calm driving and higher rpm under spirited driving. Paddle shifters are definitely quicker though.

4r3s · 03-14-2011, 01:36 PM

Quote:

Originally Posted by Juruki

doesnt the 7AT redline every gear if you leave it in full auto? Whats better if you use paddle shifters?

when you floor an AT it will go up to redline bounce off the limiter and then shift if you don't adjust your throttle. you can make an AT shift by letting up off the gas briefly too but its slower than the paddles. By using the paddle shifters you are removing some of the ecu processing and therefore able to shift faster (I'm pulling that out of my arse but it sounds reasonable to me). I'm really impressed he got a 12.9 stock, when I went, stock, I got a 13.3 but it was in the heat of the summer 90+ degress with 90%+ humidity. I can't imagine cooler weather could make nearly a half second difference for me.

jnaut · 03-14-2011, 01:58 PM

Quote:

Originally Posted by 4r3s

when you floor an AT it will go up to redline bounce off the limiter and then shift if you don't adjust your throttle. you can make an AT shift by letting up off the gas briefly too but its slower than the paddles. By using the paddle shifters you are removing some of the ecu processing and therefore able to shift faster (I'm pulling that out of my arse but it sounds reasonable to me). I'm really impressed he got a 12.9 stock, when I went, stock, I got a 13.3 but it was in the heat of the summer 90+ degress with 90%+ humidity. I can't imagine cooler weather could make nearly a half second difference for me.

on average 1% hp increase to 10 degrees on ambient difference.

90 ST · 03-23-2011, 12:02 AM

Are you running stock tires also?

b1adesofcha0s · 03-23-2011, 12:04 AM

Quote:

Originally Posted by 90 ST

Are you running stock tires also?

Yeah running the stock Advans that come with the base 18" wheels.

90 ST · 03-23-2011, 12:14 AM

Damn nice time! I was hoping you were going to say some brand of sticky tires, so i knew which to get next. LOL

b1adesofcha0s · 03-23-2011, 12:21 AM

Haha, thanks. I think I need to replace my front tires at some point, they're pretty worn out. I've been thinking a little bit about what kind of tires to replace them with. A quick look at tire rack shows that the oem tires are the most expensive for this size. Might go with some Potenza's. Will probably wait as long as I can to replace the tires though.

GZ3 · 03-23-2011, 10:11 AM

^^^ re-11s

A.J@CarbonSignal · 03-23-2011, 10:23 AM

Good job. I'm sure you can pull lower numbers with some decent DR's.

b1adesofcha0s · 03-23-2011, 10:44 AM

As far as tires go, I'm trying to get some that are relatively cheap for now since I'm kind of broke. Not too worried about getting drag radials since I won't be hitting the strip that much. I would much rather put that money towards getting some bolt ons. I really just went to see what could do and maybe get a baseline for my future mods.

03-13-2011, 10:16 AM	#17 (permalink)
brian0128 Base Member Join Date: Feb 2011 Location: Crofton, MD Posts: 249 Drives: 09 370Z Sport 6MT Rep Power: 14	Congrats Shahid! It was perfect weather out yesterday and everyone was amazed how well his car launched at the track. I was impressed with the 60ft times especially since it was his first time at the track! For comparison, I ran my Z too which is a 6 speed with Gen3 intakes and I was only able to run a 13.2 @ 106.5mph with a 1.9 60ft time. I did hit the limiter and went through the traps in 3rd instead of 4th but that would have at best given me just a tenth I think. Shahid's car is quick for a factory car and there was no tire pressure adjustment or weight reduction. We got off Rt. 95 North after driving for a few hours with the Mid Atlantic Group, he paid his fee, got right in line, received a 1 minute brief on the staging points(total time from entering gate to his run was less than 5 minutes) and he ran a great time! Last edited by brian0128; 03-13-2011 at 10:35 AM.

03-23-2011, 12:21 AM	#27 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Haha, thanks. I think I need to replace my front tires at some point, they're pretty worn out. I've been thinking a little bit about what kind of tires to replace them with. A quick look at tire rack shows that the oem tires are the most expensive for this size. Might go with some Potenza's. Will probably wait as long as I can to replace the tires though. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

03-23-2011, 10:11 AM	#28 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 21	^^^ re-11s __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

03-23-2011, 10:23 AM	#29 (permalink)
A.J@CarbonSignal Track Member Join Date: Feb 2011 Location: Dubai Posts: 581 Drives: '05 TT350z, '07 Z06 Rep Power: 16	Good job. I'm sure you can pull lower numbers with some decent DR's. __________________ CarbonSignal Automotive *Facebook*

03-23-2011, 10:44 AM	#30 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	As far as tires go, I'm trying to get some that are relatively cheap for now since I'm kind of broke. Not too worried about getting drag radials since I won't be hitting the strip that much. I would much rather put that money towards getting some bolt ons. I really just went to see what could do and maybe get a baseline for my future mods. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

03-13-2011, 03:09 AM	#16 (permalink)
Thomasd Base Member Join Date: Jun 2010 Location: Youngstown, oh Posts: 30 Drives: 09 370z Blue 7AT Rep Power: 15	Great times! Was there a tail wind?

03-13-2011, 10:34 AM	#18 (permalink)
brian0128 Base Member Join Date: Feb 2011 Location: Crofton, MD Posts: 249 Drives: 09 370Z Sport 6MT Rep Power: 14	I took a look at my time slip and compared the times to see where his car was faster than mine. We were dead even to the 330ft mark but his car is really strong between the 330 and the 1/8th mile. My 1/8 time was 8.580 @ 82.65mph. I had what I felt was a great run except for hitting the limiter at the top of 3rd but he had me by quite a bit at the 8th mile which was before that happened. I can't wait to see what happens if he lets some air out of the tires and runs with a cool engine.

03-14-2011, 11:32 AM	#19 (permalink)
Juruki Track Member Join Date: Mar 2010 Location: SoCal Posts: 965 Drives: 370Z Tour/Sport/Navi Rep Power: 16	doesnt the 7AT redline every gear if you leave it in full auto? Whats better if you use paddle shifters?

03-23-2011, 12:02 AM	#24 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 421	Are you running stock tires also?

03-23-2011, 12:14 AM	#26 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 421	Damn nice time! I was hoping you were going to say some brand of sticky tires, so i knew which to get next. LOL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
St Thomas Drag Strip	Z eliminator	Canada	3	03-22-2010 02:03 PM
My drag strip results (bad)	Skorch	Track / Autocross / Drifting / Dragstrip	13	05-13-2009 04:21 PM
Zmax Drag Strip 4-17-09	HKYStormFront	Other Vehicles	7	04-25-2009 12:59 AM
Any drag strip results?	Skorch	Track / Autocross / Drifting / Dragstrip	38	04-15-2009 09:39 PM