370z at SCCA National Championships

speedworks · 09-24-2010, 10:17 PM

I'm here at Road America, volunteering on the corner stations, when what I see is a 370z on the track, in T2. He didn't look too fast, and looking at the qualifying results, he was a few seconds off the front. I think he qualified 22nd out 24. The setup looked a little weird too, like the rear end was too low. Regardless, it is nice to finally see one of these at the track. Race is tomorrow.

CrownR426 · 09-25-2010, 04:42 AM

Go z go!

spearfish25 · 09-25-2010, 12:40 PM

video?

speedworks · 09-25-2010, 09:58 PM

I'm back after a day, and the guy didn't even make the first lap. I don't know what happened, but when he came by me (at 11, aka Kink), he didn't have an exhaust pipe and was moving at 1/3 speed. Not a good showing.

rracer05 · 12-11-2010, 10:42 AM

Sorry about the lack of response regarding the 370Z at the runoffs. It was a great time even if the results were way less than expected or desired. FYI the Z was "brand new" and we had a decision to take it even though it had not been on the track before. Lots of small issues but with extreamly limited track time it was impossible to complete all concerns. For the record, we did not loose exhaust pipe, was just VERY QUIET due to fail safe mode...On Thursday we recorded a 134.7 MPH at the turn 5 trap, during the first race lap; a blistering 61MPH...I expect much different results with additional track time and development. I will post additional progress as this next season starts in February. Thanks for your interest!
PS; Thanks for helping out working the corners!

ChrisSlicks · 12-11-2010, 11:35 AM

So did you figure out what caused the limp mode in the race?

Thanks for campaigning the new car, hope you are more successful next year.

rracer05 · 12-11-2010, 05:55 PM

Yes we did; the brake switch...intelegent brake system communicates with ECU and when you have a WOT and brake application, the limp mode is activated. Heck of a way to learn, but very encouraged by the limited laps we did have.

Season starts in February, can not wait for revenge! Will have it out for a few track days to be sure we have all the details worked out.

ChrisSlicks · 12-12-2010, 10:37 AM

Quote:

Originally Posted by rracer05

Yes we did; the brake switch...intelegent brake system communicates with ECU and when you have a WOT and brake application, the limp mode is activated. Heck of a way to learn, but very encouraged by the limited laps we did have.

It isn't actually limp mode, it's a power cut mode - and it is far worse! It seems to be tied in through the brake light fuse, you should be able to cut the signal to the ECU without messing up the brake lights. You can pull the brake light fuse but that's probably not a good thing for wheel to wheel racing.

Quote:

Originally Posted by rracer05

Season starts in February, can not wait for revenge! Will have it out for a few track days to be sure we have all the details worked out.

Best of luck, keep us all posted!

speedworks · 12-12-2010, 08:22 PM

Quote:

Originally Posted by rracer05

PS; Thanks for helping out working the corners!

Yeah, I race and work. Have been doing the runoffs for 20 years, too much fun. Plan to run it in 2 years. I could have sworn your exhaust (maybe muffler or tips), was missing when you came by. Either way, next year is a whole new year.

Mike · 12-12-2010, 09:13 PM

Quote:

Originally Posted by rracer05

Yes we did; the brake switch...intelegent brake system communicates with ECU and when you have a WOT and brake application, the limp mode is activated. Heck of a way to learn, but very encouraged by the limited laps we did have.

Season starts in February, can not wait for revenge! Will have it out for a few track days to be sure we have all the details worked out.

Yes, I had that same problem at the Natl Z Convention and it kept me out of the track day. 15% throttle max.

03threefiftyz · 12-16-2010, 11:30 PM

Quote:

Originally Posted by ChrisSlicks

It isn't actually limp mode, it's a power cut mode - and it is far worse! It seems to be tied in through the brake light fuse, you should be able to cut the signal to the ECU without messing up the brake lights. You can pull the brake light fuse but that's probably not a good thing for wheel to wheel racing.

Best of luck, keep us all posted!

We have the same problems with the 350's. There are several easy DIY fixes. Not sure if I am allowed to link to the site, but you could probably find them on a google search.

Good Luck in 2011!

of the car?

sig11 · 12-17-2010, 09:45 AM

Quote:

Originally Posted by 03threefiftyz

We have the same problems with the 350's. There are several easy DIY fixes. Not sure if I am allowed to link to the site, but you could probably find them on a google search.

There aren't any stupid linking restrictions or obfuscations here last I checked. Link away.

rracer05 · 01-01-2011, 03:03 PM

Were on facebook if you want to see some pictures. Look us up and friend us @ Zorro Racing

rracer05 · 01-01-2011, 03:06 PM

only one i have that fits this format to post

Ghost · 01-01-2011, 03:19 PM

Guys, can anyone link me these DIY fixes for 'limp' or 'power cut' modes?

Sounds like something that could potentially ruin a track day.

09-24-2010, 10:17 PM	#1 (permalink)
speedworks Track Member Join Date: Jan 2009 Location: Boston, MA Posts: 550 Drives: PW purchased 01/09 Rep Power: 17	370z at SCCA National Championships I'm here at Road America, volunteering on the corner stations, when what I see is a 370z on the track, in T2. He didn't look too fast, and looking at the qualifying results, he was a few seconds off the front. I think he qualified 22nd out 24. The setup looked a little weird too, like the rear end was too low. Regardless, it is nice to finally see one of these at the track. Race is tomorrow.

09-25-2010, 04:42 AM	#2 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 848	Go z go! __________________ Love + Hardwork + Passion RIP SVTRacer

09-25-2010, 12:40 PM	#3 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	video? __________________ 2013 Cadillac V-Wagon, RIP Z

12-11-2010, 10:42 AM	#5 (permalink)
rracer05 Base Member Join Date: Dec 2010 Location: Fort Worth, TX Posts: 11 Drives: 2009 370Z, 2006 350Z Rep Power: 15	370Z at SCCA Runoffs Sorry about the lack of response regarding the 370Z at the runoffs. It was a great time even if the results were way less than expected or desired. FYI the Z was "brand new" and we had a decision to take it even though it had not been on the track before. Lots of small issues but with extreamly limited track time it was impossible to complete all concerns. For the record, we did not loose exhaust pipe, was just VERY QUIET due to fail safe mode...On Thursday we recorded a 134.7 MPH at the turn 5 trap, during the first race lap; a blistering 61MPH...I expect much different results with additional track time and development. I will post additional progress as this next season starts in February. Thanks for your interest! PS; Thanks for helping out working the corners!

12-11-2010, 11:35 AM	#6 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	So did you figure out what caused the limp mode in the race? Thanks for campaigning the new car, hope you are more successful next year. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

09-25-2010, 09:58 PM	#4 (permalink)
speedworks Track Member Join Date: Jan 2009 Location: Boston, MA Posts: 550 Drives: PW purchased 01/09 Rep Power: 17	I'm back after a day, and the guy didn't even make the first lap. I don't know what happened, but when he came by me (at 11, aka Kink), he didn't have an exhaust pipe and was moving at 1/3 speed. Not a good showing.

12-11-2010, 05:55 PM	#7 (permalink)
rracer05 Base Member Join Date: Dec 2010 Location: Fort Worth, TX Posts: 11 Drives: 2009 370Z, 2006 350Z Rep Power: 15	370z t2 Yes we did; the brake switch...intelegent brake system communicates with ECU and when you have a WOT and brake application, the limp mode is activated. Heck of a way to learn, but very encouraged by the limited laps we did have. Season starts in February, can not wait for revenge! Will have it out for a few track days to be sure we have all the details worked out.

01-01-2011, 03:03 PM	#13 (permalink)
rracer05 Base Member Join Date: Dec 2010 Location: Fort Worth, TX Posts: 11 Drives: 2009 370Z, 2006 350Z Rep Power: 15	Were on facebook if you want to see some pictures. Look us up and friend us @ Zorro Racing

01-01-2011, 03:19 PM	#15 (permalink)
Ghost Base Member Join Date: Oct 2010 Location: oH Posts: 95 Drives: Z34 Rep Power: 15	Guys, can anyone link me these DIY fixes for 'limp' or 'power cut' modes? Sounds like something that could potentially ruin a track day. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sunday Jul 11: Aust GT Championships - get onto the track for 4 x 20 min sessions	BGTV8	Australia/New Zealand	0	07-02-2010 03:03 AM
Ft. Riley SCCA AutoX event Nov '09	Mozen	Track / Autocross / Drifting / Dragstrip	0	06-26-2010 05:52 AM
Vid of 370z at a SCCA event	>135I	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	03-06-2010 02:28 PM
Who's 370Z Registered in BSL for SCCA National Championships	Ruff	Track / Autocross / Drifting / Dragstrip	4	08-24-2009 11:08 PM
370z takes 1st place at SC SCCA autocross	AK370Z	Track / Autocross / Drifting / Dragstrip	14	05-08-2009 10:25 AM