tested ms confirmed - "stop lamp" fuse pulled = stand still burnouts allowed

chuckd05 · 07-04-2010, 03:18 PM

I thought it was your abs fuse that needed to be pulled but it is indeed your STOP LAMP fuse in our fuse box by drivers side foot panel that needs to be pulled. It's a 10 amp fuse . No dash lights came on until after I did the burnout...

Restarted the car and all lights went back to normal.

When the Wifey gets home I am gonna see if it does eliminate your brake lights ...

I wish I knew this earlier !

Thanks to whomever suggested this In one of the 12.9 threads !

Z eliminator · 07-04-2010, 05:24 PM

thank you for that great news.
will have to try it tomorrow night.

Z

jnaut · 07-04-2010, 05:47 PM

Good job!

chuckd05 · 07-04-2010, 11:06 PM

your brake lights do not work while the fuse is out... So dont do it until you get to the track.

xdeslitx · 08-18-2010, 04:21 AM

anyone mind taking a pic of where this fuse is? I don't see a fuse box near the foot pedals...or maybe im going blind lol
thanks.

EDIT:
OK i guess i AM going blind or maybe cause its 3 20 am
Any issues with pulling this fuse? or does everything just go back to normal once you put it back in?

Z eliminator · 08-18-2010, 08:17 AM

Its a pain to remove and a bigger pain to reinstall, I use needle nose plyers on the fuse,
And the burn outs are good 7000 in second gear gets the tires hot. You can see my burn outs in the " drag section , Under Z eliminator drag videos,
I have drag radials on the car.

Z

xdeslitx · 08-18-2010, 08:55 AM

Quote:

Originally Posted by Z eliminator

Its a pain to remove and a bigger pain to reinstall, I use needle nose plyers on the fuse,
And the burn outs are good 7000 in second gear gets the tires hot. You can see my burn outs in the " drag section , Under Z eliminator drag videos,
I have drag radials on the car.

Z

This is the fuse box right? and it's the stop lamp fuse that needs to be taken out? I just don't want to be mistaken.
How is it a pain to remove and reinstall? When I look at the fuse box by the driver side, it seemed pretty straightforward. I quickly found the stop lamp fuse. Shouldn't the little plastic "fuse clip" be enough to take it out?

Everything goes back to normal though, when you reinsert the fuse? Nothing out of the ordinary happens?

chuckd05 · 08-19-2010, 02:45 AM

Yup, use the fuse puller up in the top right and take out the "stop lamp" fuse...

you will not have break lights while its out but everything goes right back to normal after you put it back in...

Jordo! · 08-19-2010, 04:50 AM

Wow -- great find!

xdeslitx · 08-19-2010, 10:19 AM

Quote:

Originally Posted by chuckd05

Yup, use the fuse puller up in the top right and take out the "stop lamp" fuse...

you will not have break lights while its out but everything goes right back to normal after you put it back in...

thanks

Zat_Zuma · 08-19-2010, 11:53 AM

Quote:

Originally Posted by chuckd05

Yup, use the fuse puller up in the top right and take out the "stop lamp" fuse...

you will not have break lights while its out but everything goes right back to normal after you put it back in...

I don't know about this. Don't most racetracks require you to have working brake lights to be allowed to run in a street drag event?

chuckd05 · 08-19-2010, 09:54 PM

i did it with no problems... I am not big on rep points but for some reason I have like none and feel like I share some use full info.. seems the only way is to post some *** and titties, lol...

hook me up with some rep fella's, ha

Boost_lee · 08-20-2010, 01:52 AM

Quote:

Originally Posted by Zat_Zuma

I don't know about this. Don't most racetracks require you to have working brake lights to be allowed to run in a street drag event?

I think they require a rear parking lamp. I don't believe it has to be a functioning brake light. I could be wrong though...

WarmAndSCSI · 08-20-2010, 02:18 AM

Just pull it in the staging lanes or pits... they'll never even notice.

Trips · 08-20-2010, 03:12 AM

Quote:

Originally Posted by chuckd05

i did it with no problems... I am not big on rep points but for some reason I have like none and feel like I share some use full info.. seems the only way is to post some *** and titties, lol...

hook me up with some rep fella's, ha

You have been Reped

07-04-2010, 03:18 PM	#1 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 20	tested ms confirmed - "stop lamp" fuse pulled = stand still burnouts allowed I thought it was your abs fuse that needed to be pulled but it is indeed your STOP LAMP fuse in our fuse box by drivers side foot panel that needs to be pulled. It's a 10 amp fuse . No dash lights came on until after I did the burnout... Restarted the car and all lights went back to normal. When the Wifey gets home I am gonna see if it does eliminate your brake lights ... I wish I knew this earlier ! Thanks to whomever suggested this In one of the 12.9 threads ! __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-) Last edited by chuckd05; 07-04-2010 at 11:07 PM.

07-04-2010, 05:24 PM	#2 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	thank you for that great news. will have to try it tomorrow night. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

07-04-2010, 05:47 PM	#3 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	Good job! __________________ Best 1/4 mile 12.24 Best mph 114.5_______

07-04-2010, 11:06 PM	#4 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 20	your brake lights do not work while the fuse is out... So dont do it until you get to the track. __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

08-18-2010, 04:21 AM	#5 (permalink)
xdeslitx A True Z Fanatic Join Date: Jul 2010 Location: Tu-jungle, CA Posts: 13,045 Drives: Yaris Rep Power: 63	anyone mind taking a pic of where this fuse is? I don't see a fuse box near the foot pedals...or maybe im going blind lol thanks. EDIT: OK i guess i AM going blind or maybe cause its 3 20 am Any issues with pulling this fuse? or does everything just go back to normal once you put it back in? Last edited by xdeslitx; 08-18-2010 at 05:21 AM.

08-18-2010, 08:17 AM	#6 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Its a pain to remove and a bigger pain to reinstall, I use needle nose plyers on the fuse, And the burn outs are good 7000 in second gear gets the tires hot. You can see my burn outs in the " drag section , Under Z eliminator drag videos, I have drag radials on the car. Z 370Zsteve likes this. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

08-19-2010, 02:45 AM	#8 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 20	Yup, use the fuse puller up in the top right and take out the "stop lamp" fuse... you will not have break lights while its out but everything goes right back to normal after you put it back in... __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

08-19-2010, 04:50 AM	#9 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Wow -- great find! __________________ Enjoy it. Destroy it.

08-19-2010, 09:54 PM	#12 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 20	i did it with no problems... I am not big on rep points but for some reason I have like none and feel like I share some use full info.. seems the only way is to post some *** and titties, lol... hook me up with some rep fella's, ha __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

08-20-2010, 02:18 AM	#14 (permalink)
WarmAndSCSI A True Z Fanatic Join Date: May 2010 Location: SLC, UT Posts: 1,671 Drives: '08 Evo X \| '10 370Z Rep Power: 18	Just pull it in the staging lanes or pits... they'll never even notice. __________________ '10 PW 370Z 7AT - wife's car - Project Raspberry Cheesecake '08 Evo X - built motor+trans \| BB-X @ 32 psi \| CH3OH \| self-built+tuned - ??? WHP '01 Galant V6 - built motor \| GT35R \| self-built+tuned - 550+ WHP (retired)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Rear Fog-Lamp "Z" light	Caravanshaka	DIY Section (Do-It-Yourself)	20	09-13-2014 05:02 PM
Do It Yourself Fog Lamp (EASY)	lastblueprint	DIY Section (Do-It-Yourself)	84	06-05-2014 02:08 PM
"Warning" Carbon Fiber Z emblems "DO NOT FIT"	NXTAZEE	Exterior & Interior	2	12-20-2009 03:49 AM