First track experience today ! Some good, some really bad

travisjb · 02-26-2009, 10:05 PM

I'm having it done by my local shop (not sponsor)... they are building it under their in-house parts division and plan to sell it to the masses after I test next weekend... they've put a lot of time into spec'ing it out, so hopefully it will have the right amount of capacity and be kit'd for clean install... i will post lots of pictures next week when done... will ask them to sponsor here as well...

I talked to another reputable parts mfgr that intends to build a kit also... this thread has gotten some attention!

FairmanZ · 02-27-2009, 04:19 AM

The edmunds.com article on the 370z mentions an oil cooler and diff cooler available from Nismo. This picture is from the Edmunds website too. It seems most of the test cars given to the press came fitted with these coolers. But these parts don't seem to be on sale from Nismo yet. Nissan better hurry and bring them to the market soon!!!

Quote:

You might also be interested in the special Nismo parts fitted to this test car: an engine oil cooler mounted ahead of the radiator and this cooler for the limited-slip rear differential.

LinkBacks (?) LinkBack to this Thread: http://www.the370z.com/track-autocross-drifting-dragstrip/1706-first-track-experience-today-some-good-some-really-bad.html
Posted By	For	Type	Date
New 370Z Overheating with mild track time.... - Bob Is The Oil Guy	This thread	Refback	02-04-2009 01:37 PM
New 370Z Overheating with mild track time.... - Bob Is The Oil Guy	This thread	Refback	02-04-2009 01:07 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
H2R Track Video (ZCON09 Track Event)	zsport1	ZCON 2009	4	04-01-2009 06:28 PM
In case anyone needs a good laugh . . .	semtex	The Lounge (Off Topic)	9	01-30-2009 05:01 AM
10 Things You Should Know About The New Xbox Experience	AK370Z	The Lounge (Off Topic)	3	11-19-2008 12:01 PM
BMW Ultimate Drive® experience 10.31.08	AK370Z	The Lounge (Off Topic)	8	11-07-2008 07:00 PM

02-26-2009, 10:05 PM	#1 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 189	I'm having it done by my local shop (not sponsor)... they are building it under their in-house parts division and plan to sell it to the masses after I test next weekend... they've put a lot of time into spec'ing it out, so hopefully it will have the right amount of capacity and be kit'd for clean install... i will post lots of pictures next week when done... will ask them to sponsor here as well... I talked to another reputable parts mfgr that intends to build a kit also... this thread has gotten some attention!